|
|
Project Documentation of Electrical Wiring for the Family House in Scope for Realization
Orság, Štěpán ; Janík, Daniel (referee) ; Mastný, Petr (advisor)
The bachelor's thesis is focused on project documentation for a family house in the scope for implementation. The thesis is divided into two parts. The first part presents a theoretical analysis of data distribution and materials for the design of lighting and lightning protection system. The intelligent Loxone system, which is used in a family house project, is also presented in the first part. The second part of the bachelor's thesis is focused on creation of an implementation project, which is consists of text and drawing part. The project includes budget control and risk control. The design of lighting and lightning protection system is also included here. Work drawings of wiring in the house, parts of lightning protection and design of switchboards are integral part of the thesis.
|
|
|
Electrical installation in family house
Tesař, Jan ; Procházka, Petr (referee) ; Ondrejček, Vladimír (advisor)
This Bachelor Thesis is concerned with the design of the electrical installation of a family house. There are two main parts of the thesis – theoretical basis and the main design. In the theoretical part the reader is at first introduced to a powerline section, in which the electrical installation from the powergrid to a terminal equipment is described. Next part is about a low voltage wiring, where the commonly used types of wiring and devices are described. In the third part the reader can read about a lightning protection and its inner and outer parts. The main design consist of situational designs of devices and wiring in the house, switchboard designs, revision of the electrical protection and the technical report.
|
|
|
Design of Lightning Protection of Family House
Kovář, Zdeněk ; Bátora, Branislav (referee) ; Toman, Petr (advisor)
Bachelor´s thesis decribes the fundamental theory that is necessary for the proper design of the house from the damaging effects of lightning. The aim is to give a brief and comprehensive look into the issues. The first part of this thesis describes the emergence of lightning, adverse effects on protected and unprotected building and risk analysis. The second part presents the different types of protections. The following third part describes a brief overview of the history of standards and regulations and overview of standards currently valid in the Czech Republic. The last part of the thesis deals with the creation of my own proposal for lightning protection for the chosen fictitious family house.
|
|
|
Application of surge protection in LV networks
Brtnický, Pavel ; Šlezingr, Jan (referee) ; Bátora, Branislav (advisor)
The work include the issues about surge protection in low voltage networks. The first part give a theoretical analysis of the surge protection, where is described own creation and basic division. The second part give a inner and outer protections, where is characterized, what protections contain and methods, with which to design protection. In the third part is few words about computer softwares, which supports dimensioning and design protections. The second half of the work give a specific design of protections for fire station, first there are determinated risks for building without surge protection and after for building under surge protection, design of outer protection together with verification and design of inner protection.
|
|
|
Application of overvoltage protection in LV networks
Knebl, Jan ; Novotný, Jan (referee) ; Bátora, Branislav (advisor)
This paper describes the design of surge protection for objects of civil construction. The aim of this paper is to acquaint the reader with the problems of this region, which is nowadays especially for houses neglected. The introductory part of the thesis is focused on the theoretical analysis of the problem and become familiar with the standards in force, without which a person moving in this field certainly can not do. In the first major section is a repartition surge in general terms. In the second chapter, a repartition of surge protection on the inside and outside and a description of the individual components of these protections. The third chapter is made complete design protection for the school building, the first step is an analysis of the risks to unprotected building, then the protected and ultimately design of internal and external surge protection. In the last chapter, a check is made of the risk analysis using DEHN Support.
|
|
|
The design of the lightning protection for the house
Tesař, Luděk ; Bátora, Branislav (referee) ; Toman, Petr (advisor)
This work describes the design rules for the lightning protection of civic construction. The aim of this work is to provide a comprehensive view of the basic design rules for the lightning protection. The actual design is preceded by the detailed introduction to the relatively large problems in this sphere. The introductory part is focused on the approach of technical standards and legislative requirements. In the second chapter the thesis deals with lightning in general and lightning current and its parameters. The following chapter focuses on the effects of lightning current, indicating the damage caused by lightning strikes to the building or its surroundings. Then the thesis deals with analysis and risk management. The next chapter describes and explains the system of external and internal lightning protection. The last part is devoted to a specific design of the lightning protection for the chosen house.
|
|
|
The desingn of the lighting protection for civil buildings
Šebesta, Ondřej ; Bátora, Branislav (referee) ; Toman, Petr (advisor)
This thesis focuses on the issue of lightning protection and goes along with ČSN EN 62 305 norms. First part goes into effects of lightning on objects and engineering networks in theory. Second part familiarizes external lightning protection and possibilities of its realization. The issues of internal protection against lightning and surge protection are analysed afterwards. Second half familiarizes protected family house and the risks are calculated for this house. External protection is designed and verified by protective angle and rolling sphere methods. Last part of this thesis focuses on internal surge protection and individual levels of surge protection are designed.
|
|
|
Planning and design electrical protection in the house wiring
Chromík, Aleš ; Mastný, Petr (referee) ; Bátora, Branislav (advisor)
The work includes familiarization with the problems of protection from injuries by electric current that includes individual protections and their use. In the work is also included effect of electric current on humans. Another point is the familiarization of protection against external and internal atmospheric surge in house wiring. Project risk analysis, against injuries to living beings by lightning strike, is calculated for the protection of atmospheric surge. The main point of this work deals with the procedure of design process of house wiring protections for given object. The project includes technical drawing, which contains how to design power and data distribution systems and switchgears, as well as the drafting of lightning system which accuracy is verified by the methods of protective angle and the ball rolling. Design and location of the right types of surge protection arresters is selected for a given objects. All project documentation is discussed in the technical report, which refers to existing standards.
|
|
|
Design of overvoltage protections according to CSN EN 62 305
Pochop, Zbyněk ; Paar, Martin (referee) ; Bátora, Branislav (advisor)
This Bachelor's thesis deals with the procedure in designing overvoltage protections for an ordinary house according to a new set of standards CSN EN 62305. The work consists of three main parts. The first part deals with the method of risk management according to standard CSN EN 62305-2. Besides a theoretical introduction is made a risk analysis also numerically. Result of risk analysis has implications for the way forward surge protection design for the entire building. The second part deals with the external surge protection. In the second part of the text are suggestions down lead systems and primarily air terminals. Check over is subsequently verified by the methods of the protective angle method and the rolling ball. The study also addressed the issue of TV antennae on the roof near the air-termination network. The third part of this thesis deals with internal overvoltage protection, which mainly concerns the design and location of surge arresters and lightning arrester.
|
|
|
Design of overvoltage protection for the object with explosive risk
Polášek, Roman ; Novotný, Jan (referee) ; Bátora, Branislav (advisor)
This master´s thesis deals with the designing process of surge protection for the object potentially explosive atmospheres and according to a set of standards ČEN EN 62305 and ČSN EN 60079. This work consists of four main parts. The first part deals with the theory of lightning and surges. Subsequently, in the second part is devoted to the theory of protection against these phenomena and proposals for external and internal lightning protection and surge. This chapter also deals with more demands on electrical installations in hazardous areas. The third part deals with the analysis of the risks to the subject paint and according to ČSN EN 62305-2 ed.2 and at the conclusion of the study is a proposal for external lightning protection and internal surge protection.
|
guest ::
