|
|
Safety of the gantry-type machining centre
Pejchal, Viktor ; Blecha, Radim (referee) ; Blecha, Petr (advisor)
The bachelor's thesis deals with the safety requirements of the harmonization legislation EU of the portal machining center. Within the specific machinery, a list of relevant harmonized standards, a list of possible hazards and an overview of calculations with a particular calculation of the safe cover thickness is prepared.
|
|
|
Implementation of the Safety Control of Small Aircraft Operator
Šalanda, Michal ; Šplíchal, Miroslav (referee) ; Schaumann, Ondřej (advisor)
Nowadays preservation of safety is one of the most important conditions for consequential air traffic development. That was the reason why the Safety Management System was formed by the ICAO. Thesis´ objective was especially to scrutinize all the aspects relating to implementation of this system. In the first place every component of the system was described, eventually its function. Next point was to draft an implementation plan for small aviation operators. Besides that ways and means of evaluating effectiveness of the system and expected benefits were described. The process of implementation was consulted with several aviation operators and organizations related to civil aviation whether from the Czech Republic or abroad. Their knowledge helped in many ways to make an issue of practical implementation of the Safety Management System clear. Finally it is true to say that the Safety Management System going to be an essential part of every aviation operator in few years.
|
|
|
Safety assessment of NHX5500 DMG MORI machining center
Novotný, Petr ; Blecha, Radim (referee) ; Blecha, Petr (advisor)
The diploma thesis deals with legislative purposes for the operation of machinery in the Czech Republic and the European Union. It deals with the analysis of technical standards of machinery, specific machining centers. The analysis of the risky machining center NHX 5500 DMG Mori is based on this. The result of the work is the minimization of ongoing risks and meeting the legal requirements of the state of the operated machining center.
|
|
|
Risk Assessment Work Safety in Thermal Power
Turčan, Michael ; Schön, Pavel (referee) ; Jurová, Marie (advisor)
This master’s thesis focus on the analysis of work conditions and risk assessment for specific company and specific project. It brings better condition to current action in health and safety area during all working activities. Emphasis is placed on safety of work and health protection of workers. The work provides information about theory of security work explores its practical application in the organization and gives a view into risk assess and risk management.
|
|
|
Risk Management inside Construction Company
Hošková, Tereza ; Kerbr, František (referee) ; Nováková, Jana (advisor)
The subject of this thesis is risk management in construction companies. The theoretical part describes the origin and definition of risk, risk classification, sources and methods of risk management and risk reduction. The practical part is focused on a particular contract, in the particular construction company. This project presents a practical approach and risk management solutions with suggestions for preventive measures to eliminate risk factors.
|
|
|
Identification of risks related to industrial furnaces - electric arc furnaces
Krejčí, Lukáš ; Rozehnalová, Jana (referee) ; Kotek, Luboš (advisor)
Main goal of presented bachelors thesis is identification of hazards associated with operation of electric arc furnaces. But at first it is necessary to become acquainted with the device and to understand its function. Therefore description of construction with emphasis on electrical circuit, overview of few selected industrial disasters and legislative requirements for safe operation of the furnaces form starting position for hazard identification which is carried out according to the procedure of the standard ISO 12100 in the last chapter of this thesis.
|
|
|
Hazard analysis of toolroom workshop
Dubovský, Dávid ; Bradáč, František (referee) ; Blecha, Petr (advisor)
This master`s thesis deals with a hazard analysis of selected machinery according to an actual legislative documents in Slovakia, which were taken over from Europien Union directives. The thesis is focused on exploring legislation related to the safety of toolroom workshop in the Czech Republic and Germany. Because of that was done the recherché of harmonized standards in these countries. Subsequently is made the identification of hazards under recherched standards and assessment of control system based on the performance level of the system. In the end are all obtained data evaluated and the precautionary measures are suggested. With taking care of economic factors are finally proposed the possibilities of the elimination of risks.
|
|
|
Safety of the gantry-type machining centre
Pejchal, Viktor ; Blecha, Radim (referee) ; Blecha, Petr (advisor)
The bachelor's thesis deals with the safety requirements of the harmonization legislation EU of the portal machining center. Within the specific machinery, a list of relevant harmonized standards, a list of possible hazards and an overview of calculations with a particular calculation of the safe cover thickness is prepared.
|
|
|
Safety assessment of NHX5500 DMG MORI machining center
Novotný, Petr ; Blecha, Radim (referee) ; Blecha, Petr (advisor)
The diploma thesis deals with legislative purposes for the operation of machinery in the Czech Republic and the European Union. It deals with the analysis of technical standards of machinery, specific machining centers. The analysis of the risky machining center NHX 5500 DMG Mori is based on this. The result of the work is the minimization of ongoing risks and meeting the legal requirements of the state of the operated machining center.
|
|
|
Identification of risks related to industrial furnaces - electric arc furnaces
Krejčí, Lukáš ; Rozehnalová, Jana (referee) ; Kotek, Luboš (advisor)
Main goal of presented bachelors thesis is identification of hazards associated with operation of electric arc furnaces. But at first it is necessary to become acquainted with the device and to understand its function. Therefore description of construction with emphasis on electrical circuit, overview of few selected industrial disasters and legislative requirements for safe operation of the furnaces form starting position for hazard identification which is carried out according to the procedure of the standard ISO 12100 in the last chapter of this thesis.
|
guest ::
