|
|
Residential Building
Štěpánková, Věra ; Ing.Jitka Spáčilová (referee) ; Spáčil, Miroslav (advisor)
The project addresses the design documentation of a residential building. It is a detached house. The building has one basement and three floors. Residential house is a basement with a flat roof. The structural system consists of reinforced concrete columns and reinforced concrete ceiling. Perimeter and interior masonry infill masonry infill is composed of blocks YTONG. The roof is a single casing. The construction is based on the foundation footings and passports.
|
|
|
Newly-Built Detached House with Dental Surgeries in Brno-Žebětín
Matoušek, Jan ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of this bachelor's thesis is a design of a new building of a family house with dental surgeries in Brno – Žebětín, as well as elaboration of project documentation for realization of building construction. The building is designed for mixed use - there is stomatological surgeries available to the public in the 1st floor, and on the 2nd floor there is the owner's and his family's apartment. Both sections are separated from each other, including separate entrances to the building. The building will be located on the edge of the northern part of Brno - Žebětín. The location is slightly developed by family houses. The architectonical solution is designed with consideration of the building location and the character of the surrounding housing development. The part for living in the family house is designed for a family with three to four members. The house is detached, it is situated in a flat terrain and is designed as a partially basement. The designed building has two above-ground storeys and a basement, which has a garage for parking two cars and a technical facility of the building. Entrance to the garage is from the side of the building. The main entrances to the building are accessible from the adjacent outer curved staircase, copying the arched shape of the 1st storey facade. The section with dental surgeries on the 1st floor is designed as wheelchair accessible - for handicapped patients with limited mobility. The white solution of the facade of the house alternates with the use of a gray stone facing. The roof of the family house is designed as a single-layer flat roof.
|
|
|
Family House
Bouček, Václav ; Poláček, Lukáš (referee) ; Mazánek, Pavel (advisor)
New residential house in Veselí nad Lužnicí. Residential house is located in a flat terrain. It has two floors. House is a partial basement. The vertical and horizontal load-bearing structure are of the system POROTHERM. The roof is flat with single casting.
|
|
|
Detached house, Kuřim
Vižálek, Tomáš ; Kalužová, Alena (referee) ; Müller, Jan (advisor)
The project deals with building a family house in Kuřim. The building is designed as a detached house with garage for one car. The object has two floors, no basement. The building is situated parallel with the adjacent roads. Floor plan of the building is regular. Visual appearance of house does not affect the street and adjacent detached houses. The main entrance to the house and driveway are oriented to the road (northwest). The bearing walls are designed from the sand-lime bricks (with ETICS insulation). Ceilings are designed from the ceramic-concrete panels. The house has a shed roof, above the garage and main entrance is a flat roof.
|
|
|
Apartment building at the vineyard
Kocmanová, Michaela ; Janda, Lukáš (referee) ; Brzoň, Roman (advisor)
The aim of the bachelor’s work is a composition of project documentation for the construction building of apartment building. The object is situated on the cadastral area of Viničné Šumice on plot number 1912/21. The apartment building is designed as separated, three storeys, flat roof building without basement. There are eleven apartment units in total, from which one is designed for people with movement disabilities. To each apartment unit belong one basement cellar and part of a garden. There are two separated parking areas with thirteen parking places in total. The building stands on foundation strips. The construction system of the object is wall system. External walls are made of Porotherm brick blocks with thermal insulation from expanded polystyrene. The inside vertical load-bearing constructions are made of acoustic brick blocks with mortar pockets. The horizontal load-bearing constructions are made of reinforced concrete slabs. The building is roofed with single layer flat roof.
|
|
|
Hotel
Vavřina, Lukáš ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The diploma thesis deals with designing newly built hotel with restaurant in the village Pasohlávky. Hotel is detached building. Hotel is located at parcel no. 3163/364, Mušov territory. This is a two above-ground floor with partial basement building. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM in the upper floors of reinforced concrete wall and column. The building is based on foundation slab and strips. Hotel is roofed with a flat roof. In 1.PP is garage. In 1.NP is hotel rooms and restaurant with kitchen. In 2.NP is only hotel rooms.
|
|
|
Family house on a slope
Falta, Tomáš ; Král, Jakub (referee) ; Šuhajdová, Eva (advisor)
This bachelor thesis deals with processing of a specific part of a project documentation for a family house construction. This object is situated on a slope in a village Voděrady near Rychnov nad Kněžnou, belonging to Královéhradecký region. The family house is designed as a two-floor one, intended for a four-member family. Vertical constructions are from KM BETA SEDWIX system. The roof construction above the living quarter is made of a saddle roof with a slope of 38°. One part of the house is a garage for one car. The roof above the garage is made of one envelope flat roof.
|
|
|
Apartment building
Pavlíček, Jiří ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
The subject of this bachelor thesis is the elaboration of project documentation for the construction of an apartment building. It is a detached basement building, which is located on a rectangular plot with flat terrain. The building is designed with four floors and one underground floor. This new building is equipped with a lift for 8 people. In the underground floor there is a technical background of the building and a storage cellars for individual apartments. There are 12 flats with different disposition and size of floor areas. The load-bearing structural system is diagonal. The lower structure is made of a waterproof concrete, the so-called "white tub" which consists of a reinforced concrete foundation slab and reinforced concrete basement walls. The upper structure is built of Porotherm system, which is insulated with ETICS facade contact system with basalt wool insulation boards. Ceiling structures are designed as monolithic reinforced concrete slabs and the staircase is built as a reinforced concrete monolithic three-armed. The façade is shaped according to the partially opened loggias. The last floor recedes from the face of the building and creates spacious terraces. Holes are filled with wooden windows. The roofing of the apartment building is solved by a single-layer flat roof with a classical layer arrangement and a hydro isolation layer made of asphalt strips.
|
|
|
Apartment house
Kryštof, Filip ; Skřek, Daniel (referee) ; Donaťáková, Dagmar (advisor)
The subject of my bachelor thesis is project documentation for the construction of an apartment building. The apartment building is located in city district Praha 14 – Černý Most and designed as three floors terraced building with two receding floors on the south side. The ground floor consists of technical, storage, and parking spaces. On the second and third floor are two apartment units sized 2+KC (kitchen corner) and two apartment units sized 3+KC. Each individual apartment has its own terrace situated to the south, accessible through an all-glass wall made off of sliding HS portals. Construction system is combination of masonry wall system and cast in place concrete wall system. The building is based on concrete foundation strips. Vertical load-bearing construction on the ground floor is made of cast in place reinforced concrete, and in the floors above as ceramic blocks. The ceiling construction above the ground floor is also designed as cast in place reinforced concrete ceiling and in the grounds above as prefabricated. The roof is solved as single-layer flat roof. The cover of the building is insulated by a contact thermal insulation system ETICS. Part of the building includes internal and external parking places.
|
|
|
Fire station P3 in Hlučín
Komárková, Jana ; Klímek, Karel (referee) ; Čuprová, Danuše (advisor)
The subject of the diploma thesis is a new building of the P3 fire station in Hlučín. The facility will be used to perform the fire protection service of the population of the district fire brigade and municipal volunteer fire fighters. The fire station is designed as an isolated structure of rectangular shape, which is divided into three parts, and it is operationally and structurally interconnected. First part is partly underground two-storey administrative. The second part of the building is an exit garage and the third part forms of the technical background of the fire station. The object is designed as classic brick technology from Porotherm ceramic blocks on reinforced concrete base strips. The roof of part of fire and garage facilities is saddle, the roof of the technical background is flat.
|
guest ::
