|
|
Block of Flats
Jánská, Kamila ; Lavická, Radomila (referee) ; Lavický, Miloš (advisor)
Diploma thesis describes the design and processing of project documentation of the apartment building. The apartment building is located in the central part of the city of Brno, in the district of Štýřice. The building has 5 floors. Its basementless with flat roof and it is based on the footings of plain concrete. Load-bearing, peripheral walls and partitions are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO built on POT supports. Peripheral walls of all floors are insulated with external thermal insulation composite system ETICS with thermal insulation of mineral wool. In the place of the plinth is wool replaced by XPS polystyrene. In the facade there are anchored wooden lattice constructions using ProPasiv anchors. These constructions are covered by façade cladding sheets CEMBRIT METRO and they devide whole building into separate units. There is housing and communal part of the building. On the first floor there are storage areas, the main service room, utility room and two barrier-free apartments. In the second to the fifth floor there are 9 residential units, one of which is designed as duplex apartment . All floors are connected by staircase and wheelchair lift. Parking for 17 cars is designed in front of the building . Two parking spaces are wheelchair accessible.
|
|
|
Villahouse Kasalka in Humpolec
Honzárek, Pavel ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
This diploma thesis deals with the project documentation of villa house Kasalka in Humpolci. The house is situated in the region Highland in the village Humpolec, cadastral territory of Humpolec. The building is designed as a five-story brick building, where the vertical structures are designed from a structural system POROTHERM. The external walls are insulated. The building is covered with three flat roof decks at different heights, two of which are walkable and used as terraces. The building includes Garage for ten cars of type 1a and small establishment an office type.
|
|
|
University College in Olomouc
Šlézarová, Markéta ; Kalánek, Jiří (referee) ; Čupr, Karel (advisor)
Project documentation is about a university college and commercial facilities. It is a detached building, built in close proximity to the University of Economics in Olomouc. The building has five floors. The first floor is used for commercial purposes and another four floors for student accommodation. Roof is flat. The structural system consists of reinforced concrete columns and beams and bricks Ytong. Ceilings are reinforced concrete slabs. The roof is a single casing. The construction is based on reinforced concrete footings and the walls are passports.
|
|
|
Apartment Building
Jiráček, David ; Melcr, Petr (referee) ; Kalousek, Lubor (advisor)
The assignment of my bachelor's thesis is the elaboration of project documentation for the construction of a new apartment building in Chrudim in a new location named Na Špici. The apartment building has five floors and no basement. The last fifth above-ground is receded with adjacent terraces. In the first floor there are vestibules, entrance corridors, a carriage house with a bicycle shed, a stairwell, a cellar, two technical rooms and two indoor garage spaces. There are four residential units on the first floor. On the third floor, four residential units are being changed. Three residential units are on the fourth apartment floor. On the fifth floor there are two residential units with terraces, which are designed as a single-skin flat roof for walking. The building is covered with a green single-skin flat roof. The construction system of the apartment building is made of ceramic blocks. The building is insulated with an external contact thermal insulation system ETICS made of basalt wool. the foundation of the apartment building will be on a board with foundation strips.
|
|
|
Mixed-use building in Brno
Kopecký, Lukáš ; Mizerová,, Lenka (referee) ; Smolka, Radim (advisor)
This thesis describes the design and processing of project documentation multifunctional house. The multifunctional building is located in the central part of the city of Brno, in the district of Štýřice. This is a five-storey, basementless building with a flat roof on two levels. The building is based on foundations made of plain concrete. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO stored on POT beams. External walls of all floors are insulated using an external ETICS with thermal insulation made of mineral wool, which is replaced by XPS polystyrene used for plinth. Part of the facade is designed as ventilated, consisting of trusses of wood and sheathed by cladding panels CEMBRIT METRO. This architecturally divide the building into separate units. The building includes parts of the administrative, residential parts and parts for business purposes. On the first floor there are areas of common storage area of the apartment house, the main utility room, utility room. Furthermore, there is an administrative part, where are the reception facilities for reception, sanitary facilities for employees and office work. Part of the first floor is also a small shop with warehouse and facilities for employees. The second floor is a residential unit and the second part of the administrative unit. Third to the fifth floor is only residential and there are 6 residential units. All floors are connected by staircase and a wheelchair lift. In front of the building is designed parking lot for 20 cars. One of the parking space is wheelchair accessible.
|
|
|
Apartment building with multifunction
Beneš, Martin ; Různar, Daniel (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is the design and elaboration of project documentation for the implementation of a new apartment building with multifunction, ie the building SO-01 Bytový dům. It is a newly built apartment building in the cadastral area of Řečkovice [611646], on plot number 49. The building is designed as a detached house with 6 floors (1 underground, 5 above ground) and is designed for living. The building has a total of 14 residential units. On the 1st floor there are rooms for 3 establishments (establishment No. 1 for catering, establishments No. 2 and No. 3 have no specified use). In the 1st floor there are 13 parking spaces for owners / tenants of housing units and in front of the building there are parking spaces for owners / tenants of housing units and for visitors to establishments. The building is designed with a flat single-skin roof, the facade is insulated with the ETICS system of mineral wool boards with a white finish. The building is designed according to the applicable requirements for buildings with almost zero energy consumption. The requirements were achieved mainly by the parameters of the building envelope and the efficiency of the heat source.
|
|
|
Casino Galaxy
Rychlík, Adam ; Klubalová, Pavlína (referee) ; Brzoň, Roman (advisor)
Diploma thesis deals with a Casino Galaxy´s project documentation. this casino is situated in Brno - Přízřenice. The object is designed as a cubic five-storey building without basement and with a flat roof. Whole construction is composed by Sendwix system.
|
|
|
Apartment building with multifunction
Beneš, Martin ; Různar, Daniel (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor's thesis is the design and elaboration of project documentation for the implementation of a new apartment building with multifunction, ie the building SO-01 Bytový dům. It is a newly built apartment building in the cadastral area of Řečkovice [611646], on plot number 49. The building is designed as a detached house with 6 floors (1 underground, 5 above ground) and is designed for living. The building has a total of 14 residential units. On the 1st floor there are rooms for 3 establishments (establishment No. 1 for catering, establishments No. 2 and No. 3 have no specified use). In the 1st floor there are 13 parking spaces for owners / tenants of housing units and in front of the building there are parking spaces for owners / tenants of housing units and for visitors to establishments. The building is designed with a flat single-skin roof, the facade is insulated with the ETICS system of mineral wool boards with a white finish. The building is designed according to the applicable requirements for buildings with almost zero energy consumption. The requirements were achieved mainly by the parameters of the building envelope and the efficiency of the heat source.
|
|
|
Apartment Building
Jiráček, David ; Melcr, Petr (referee) ; Kalousek, Lubor (advisor)
The assignment of my bachelor's thesis is the elaboration of project documentation for the construction of a new apartment building in Chrudim in a new location named Na Špici. The apartment building has five floors and no basement. The last fifth above-ground is receded with adjacent terraces. In the first floor there are vestibules, entrance corridors, a carriage house with a bicycle shed, a stairwell, a cellar, two technical rooms and two indoor garage spaces. There are four residential units on the first floor. On the third floor, four residential units are being changed. Three residential units are on the fourth apartment floor. On the fifth floor there are two residential units with terraces, which are designed as a single-skin flat roof for walking. The building is covered with a green single-skin flat roof. The construction system of the apartment building is made of ceramic blocks. The building is insulated with an external contact thermal insulation system ETICS made of basalt wool. the foundation of the apartment building will be on a board with foundation strips.
|
|
|
Mixed-use building in Brno
Kopecký, Lukáš ; Mizerová,, Lenka (referee) ; Smolka, Radim (advisor)
This thesis describes the design and processing of project documentation multifunctional house. The multifunctional building is located in the central part of the city of Brno, in the district of Štýřice. This is a five-storey, basementless building with a flat roof on two levels. The building is based on foundations made of plain concrete. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO stored on POT beams. External walls of all floors are insulated using an external ETICS with thermal insulation made of mineral wool, which is replaced by XPS polystyrene used for plinth. Part of the facade is designed as ventilated, consisting of trusses of wood and sheathed by cladding panels CEMBRIT METRO. This architecturally divide the building into separate units. The building includes parts of the administrative, residential parts and parts for business purposes. On the first floor there are areas of common storage area of the apartment house, the main utility room, utility room. Furthermore, there is an administrative part, where are the reception facilities for reception, sanitary facilities for employees and office work. Part of the first floor is also a small shop with warehouse and facilities for employees. The second floor is a residential unit and the second part of the administrative unit. Third to the fifth floor is only residential and there are 6 residential units. All floors are connected by staircase and a wheelchair lift. In front of the building is designed parking lot for 20 cars. One of the parking space is wheelchair accessible.
|
guest ::
