|
|
Possibility of using EMW radiation for killing biotic pests
Gintar, Jan ; Klečka,, Tomáš (referee) ; Pěnčík, Jan (referee) ; Šuhajda, Karel (advisor)
The remediation of building elements and structures in terms of moisture and sterilization (inactivation) of biotic pests is dealt with quite often in construction practice and in the construction industry itself, and is thus a topical issue. The issue is dealt with by specialized companies that know the use of available technology on the market, or are themselves involved in the development and improvement of these devices. Several methods are known for the removal of moisture and sterilization of biotic pests, with sufficiently high-quality data on the technology used, the suitability of the equipment used, a more detailed description of the application of the methods themselves and the results themselves. The methods themselves, for removing moisture and eliminating (inactivating) biotic pests, must be chosen according to individual requirements, as some methods will be more appropriate (more effective) and some less suitable. For the practice itself, however, it is important that the methods are sufficiently effective and at the same time available to the wider public (their economic side). In my dissertation thesis I focus on the potential of EMW radiation utilization not only for liquidation of biotic pests (fungi, fungi, wood decaying insects), but also elimination or reduction of necessary conditions for survival or development of these biotic pests. Therefore, my work also focuses on the presence of moisture, because moisture is a common factor in the vast majority of problems associated with the occurrence of biotic pests. Due to its intensity, it is one of the less time-consuming method and therefore a more cost-effective (economically) method. The research I conducted at VUT FAST focused on the use of microwave radiation in the control of biotic pests, under conditions that are close to those on real constructions. The use of a microwave method to eliminate biotic pests and at the same time to remove moisture has proved to be advantageous.
|
|
|
Disposal of Biotic Pests by EMW Radiation
Sobotka, Jindřich ; Klečka,, Tomáš (referee) ; Myslín, Jiří (referee) ; Tomíček,, Oldřich (referee) ; Šuhajda, Karel (advisor)
The possibility of using high-frequency electromagnetic radiation in the construction sector is a common knowledge. Various experiments have been carried out to dry construction materials, or even to destroy biotic pests. However, the majority of these experiments have been executed in laboratory conditions. It means they have been carried out under exact limiting conditions, often very far off those conditions in real building practice. Therefore, this dissertation aims at exploring the possibility of utilizing microwave technology in drying and heating of construction materials, in disposing of biotic pests and sterilizing building materials under real conditions in building practice. The thesis will explain that microwaves are a term given to a part of electromagnetic radiation. Electromagnetic radiation is based on the principle that the radiated energy is absorbed by water molecules present in moist building material. In the mass of the irradiated material, the radiated energy is transformed into thermal energy, where a so-called “motion” of water molecules occurs with the energy then being transformed into kinetic energy. The microwave technology itself offers a very wide range of use, which can be easily achieved, thus making the technology available to use in the future. Part of the experiments and the necessary measurements, too, has been carried out on selected types of building materials in the premises of the Faculty of Civil Engineering of Brno University of Technology. They have been executed under conditions which most closely correspond to the conditions in real buildings. Part of the experiments and the necessary measurements were carried out on particular constructions, by the so-called in situ method. As stated in the conclusion of the dissertation, laboratory measurements and the in situ measurements differ considerably in some cases.
|
|
|
Track point of radar
Černohous, Josef ; Veselý, Oldřich (referee) ; Prokeš, František (advisor)
Diploma thesis concerns in the first part about current knowledge in the field of electromagnetic waves, the history, development and distribution of radar, radar antenna types and distribution of structure radars. The second part deals with the problem formulation and analysis. The third part defines the specific goals of diplomas thesis and the fourth part proposes a solution methode. Design and design selection is included in fifth part. The sixth section analyze selected variant and describes its components. Final seventh part contains design assessment of structural, technological and economic aspect.
|
|
|
Analysis of EMW radiation for sterilization of biotic pests
Danielová, Marie ; Svobodová, Kateřina (referee) ; Holešovský, Jan (advisor)
Biotic pests such as wood-destroying fungi, molds, and wood-destroying insects are not only a problem for old buildings but also for newer buildings. Their occurrence has a negative effect on the physical and mechanical characteristic of building materials. One of the main causes of biotic pests in buildings is moisture. Remediation of objects in terms of moisture and biotic pests is a frequent subject of solution in construction practice. There are many methods used to remove moisture and inactivate biotic pests, and their use depends on the individual requirements of individual objects. In practice, this problem is dealt with by specialized companies using well-known technologies or further participate in their research. One of the methods used for moisture remediation and inactivation of biotic pests is the irradiation of building structures using EMW radiation. Microwave heating used to dry moisture from building materials is one of the most intensive methods for sterilizing biotic pests, and due to its intensity, it is a time and cost-effective method.
|
|
|
Application possibilities of refractometer for liquids diagnostics
Macháč, Milan ; Kazelle, Jiří (referee) ; Frk, Martin (advisor)
This bachelor thesis focuses on application possibilities of refractometer for liquids diagnostics. The first part of the thesis focuses on the theoretical basics propagation of electromagnetic waves. The next section focuses on the measurement of refractive index, refractometry, a description of each type refractometers and short introduction to interferometry. The penultimate chapter is devoted to an application using a refractometer and what can measure and calculate. The last chapter is a practical part, there is described a calibration process, the measured values of the refractive index of liquids and evaluate the results.
|
|
|
Surface treatment for resistance improve of board materials with cement matrix and an organic filler
Zrza, Ondřej ; Vacula, Miroslav (referee) ; Bydžovský, Jiří (advisor)
As all materials used for exterior construction, cement-bonded particleboards also subject to climatic effects, such as frost, chemicals (eg. sulphates) or UV rays. Degradation of theese effects is slightly increased by organic base. Increased susceptibility can be eliminated by a effective coating, which reduces direct contact with aggresive influences on the board and provides longer durability. Theoratical part of this thesis analyzes different types of negatice influences and their effect on durability. Practical part contains selection of specific types of coating and assessment of their mechanical and aesthetic properties including spectrophotometric analysis of color change for each degradation effect.
|
|
|
Electromagnetic field mapping in biological tissues
Bereznanin, Martin ; Dlouhý, Jiří (referee) ; Rozman, Jiří (advisor)
The main objective of this study is to learn about the theory of electromagnetic field and to create a model of propagation of ultra short waves in a biological tissue. Next point of this paper is to determine a specific absorption rate (SAR) using a valid sanitary standard. A particular model solution was realized in a model environment of the program Comsol Multiphysics 3.5. A human head and a cellular phone with an intern antenna were successfully created in this model environment. First of all were entered appropriate parameters which led to a successful representation of the distribution of electric field intensity. A value of specific absorption rate taken by a biological tissue was determined in the next step. This value was compared to the value listed in a valid sanitary standard to prevent its overrun. A development of a temperature in a biological tissue was determined as well, according to a six minutes long interval stated in a valid sanitary standard.
|
|
|
Local IR spectra measurement system
Pospíchal, David ; Trčka, Tomáš (referee) ; Škarvada, Pavel (advisor)
The diploma thesis deals with the design of a system for measuring infrared spectra from local areas of samples. The theoretical part describes the electromagnetic waves and related phenomena. Furthermore, the semiconductor junction and solar cells are discussed. The following is a basic description of line spectrometers. In the practical part, a suitable arrangement of the whole system, collimator design, and especially the core of the whole work, ie control software and signal processing, are proposed.
|
|
|
Possibility of using EMW radiation for killing biotic pests
Gintar, Jan ; Klečka,, Tomáš (referee) ; Pěnčík, Jan (referee) ; Šuhajda, Karel (advisor)
The remediation of building elements and structures in terms of moisture and sterilization (inactivation) of biotic pests is dealt with quite often in construction practice and in the construction industry itself, and is thus a topical issue. The issue is dealt with by specialized companies that know the use of available technology on the market, or are themselves involved in the development and improvement of these devices. Several methods are known for the removal of moisture and sterilization of biotic pests, with sufficiently high-quality data on the technology used, the suitability of the equipment used, a more detailed description of the application of the methods themselves and the results themselves. The methods themselves, for removing moisture and eliminating (inactivating) biotic pests, must be chosen according to individual requirements, as some methods will be more appropriate (more effective) and some less suitable. For the practice itself, however, it is important that the methods are sufficiently effective and at the same time available to the wider public (their economic side). In my dissertation thesis I focus on the potential of EMW radiation utilization not only for liquidation of biotic pests (fungi, fungi, wood decaying insects), but also elimination or reduction of necessary conditions for survival or development of these biotic pests. Therefore, my work also focuses on the presence of moisture, because moisture is a common factor in the vast majority of problems associated with the occurrence of biotic pests. Due to its intensity, it is one of the less time-consuming method and therefore a more cost-effective (economically) method. The research I conducted at VUT FAST focused on the use of microwave radiation in the control of biotic pests, under conditions that are close to those on real constructions. The use of a microwave method to eliminate biotic pests and at the same time to remove moisture has proved to be advantageous.
|
|
|
Local IR spectra measurement system
Pospíchal, David ; Trčka, Tomáš (referee) ; Škarvada, Pavel (advisor)
The diploma thesis deals with the design of a system for measuring infrared spectra from local areas of samples. The theoretical part describes the electromagnetic waves and related phenomena. Furthermore, the semiconductor junction and solar cells are discussed. The following is a basic description of line spectrometers. In the practical part, a suitable arrangement of the whole system, collimator design, and especially the core of the whole work, ie control software and signal processing, are proposed.
|
guest ::
