|
|
Signal processing and receiving in UMTS system
Hron, Michal ; Hanus, Stanislav (referee) ; Kejík, Petr (advisor)
This semestral thesis be concerned with datailed analysis of receiving and processing signals in UMTS network system. Insistence of this work is setting to principals of RAKE receiver and processing signals in CDMA networks downlink channel. Through development system MATLAB simulates real function of RAKE receiver. This project is giving fundamental knowledges about receiving and processing of multipath signals to readers.
|
|
|
QoS in UMTS
Kavan, Radovan ; Hanus, Stanislav (referee) ; Kejík, Petr (advisor)
This thesis treats of QoS (Quality of Service) in UMTS system. The term quality of service is frequently used, recently, however not only in computer networks, but also more and more in mobile networks also. Present system of 2nd generation (2G) GSM enables only limited exploitation of QoS function. System UMTS is a system of 3rd generation (3G) already and contains quality of service in greater measure which is ensured with number of algorithms and functions. Individual QoS functions enable effective utilization of radio interface, support maintenance of planned coverage and offer high spectral efficiency. Functions that cater to quality of service are called RRM functions (Radio Resource Management). There exist five basic functions in UMTS system that are Admission control (AC), Power control (PC), Load control (LC), Handover control (HC) and Packet scheduler (PS). These functions are responsible for control of network access, control of power, control of network load, control of handover and packet (bit rate) scheduling. Last three functions are usually collectively designated as Congestion control, control of network overload. UMTS layer model, differentiation of services, traffic classes and 3GPP concept are also discussed. In thesis the attention is piad to Admission control algorithm – control of network access – in the uplink direction and to different ways of load (in the cell) modeling. Individual approaches are simulated in MATLAB. A possibility of using algorithm in the real system is discussed in conclusion.
|
|
|
Radio Network LTE Design
Tribula, David ; Kejík, Petr (referee) ; Hanus, Stanislav (advisor)
The diploma thesis deals with the design of the LTE radio part using the ICS Designer program. First, the work describes the signal processing in the physical layer LTE system, for downlink and uplink. Subsequently, it was made simple block diagram. The next part deals with models of signal propagation in the radio environment. The last part is an introduction to the ICS Designer. This section describes the base station design and demonstration of some simulations. The last part is devoted to the design of the mobile network in the given area, its simulation and subsequent comparison with the existing mobile network.
|
|
|
Expertimental GSM jammer
Charvát, Jiří ; Prokopec, Jan (referee) ; Frýza, Tomáš (advisor)
This thesis describes GSM communication, the method of its jamming and design of a jammer for this band. This document is mainly focused on design of the jammer with the variable bandwidth of jamming and the variable level of output power. Requested parameters of jamming are set by a control panel with a LCD display. In this document there is a detailed description of each function block and connection between them. At the end of this thesis there are released measured results of designed jammer.
|
|
|
Radio Network LTE Design
Tribula, David ; Kejík, Petr (referee) ; Hanus, Stanislav (advisor)
The diploma thesis deals with the design of the LTE radio part using the ICS Designer program. First, the work describes the signal processing in the physical layer LTE system, for downlink and uplink. Subsequently, it was made simple block diagram. The next part deals with models of signal propagation in the radio environment. The last part is an introduction to the ICS Designer. This section describes the base station design and demonstration of some simulations. The last part is devoted to the design of the mobile network in the given area, its simulation and subsequent comparison with the existing mobile network.
|
|
|
Signal processing and receiving in UMTS system
Hron, Michal ; Hanus, Stanislav (referee) ; Kejík, Petr (advisor)
This semestral thesis be concerned with datailed analysis of receiving and processing signals in UMTS network system. Insistence of this work is setting to principals of RAKE receiver and processing signals in CDMA networks downlink channel. Through development system MATLAB simulates real function of RAKE receiver. This project is giving fundamental knowledges about receiving and processing of multipath signals to readers.
|
|
|
QoS in UMTS
Kavan, Radovan ; Hanus, Stanislav (referee) ; Kejík, Petr (advisor)
This thesis treats of QoS (Quality of Service) in UMTS system. The term quality of service is frequently used, recently, however not only in computer networks, but also more and more in mobile networks also. Present system of 2nd generation (2G) GSM enables only limited exploitation of QoS function. System UMTS is a system of 3rd generation (3G) already and contains quality of service in greater measure which is ensured with number of algorithms and functions. Individual QoS functions enable effective utilization of radio interface, support maintenance of planned coverage and offer high spectral efficiency. Functions that cater to quality of service are called RRM functions (Radio Resource Management). There exist five basic functions in UMTS system that are Admission control (AC), Power control (PC), Load control (LC), Handover control (HC) and Packet scheduler (PS). These functions are responsible for control of network access, control of power, control of network load, control of handover and packet (bit rate) scheduling. Last three functions are usually collectively designated as Congestion control, control of network overload. UMTS layer model, differentiation of services, traffic classes and 3GPP concept are also discussed. In thesis the attention is piad to Admission control algorithm – control of network access – in the uplink direction and to different ways of load (in the cell) modeling. Individual approaches are simulated in MATLAB. A possibility of using algorithm in the real system is discussed in conclusion.
|
|
|
Expertimental GSM jammer
Charvát, Jiří ; Prokopec, Jan (referee) ; Frýza, Tomáš (advisor)
This thesis describes GSM communication, the method of its jamming and design of a jammer for this band. This document is mainly focused on design of the jammer with the variable bandwidth of jamming and the variable level of output power. Requested parameters of jamming are set by a control panel with a LCD display. In this document there is a detailed description of each function block and connection between them. At the end of this thesis there are released measured results of designed jammer.
|
guest ::
