National Repository of Grey Literature 16 records found  1 - 10next  jump to record: Search took 0.01 seconds. 
Concrete flat slab supported by columns
Macháček, Jan ; Strnad, Jiří (referee) ; Perla, Jan (advisor)
The aim of this bachelor’s thesis is a structural design of a reinforced concrete point-supported slab for the second floor construction of a hospital. Software RFEM was used for modeling of internal forces, the results were verified by equivalent frame method and moment coefficient method. According to the RFEM results a tension reinforcement and slab shear reinforcement were designed. The deflection was manually calculated. Afterwards, a reinforcement drawing was made. The calculations correspond with ČSN EN 1992-1-1 a ČSN 73 1201.
Ventilation and Air Conditioning of Civil Buildings
Matějíček, Michal ; Adam, Pavel (referee) ; Hirš, Jiří (advisor)
This bachelor thesis deals with the design of the air conditioning of a swimming pool in Karlova Studánka. Air conditioning ensures forced ventilation and adjusts incoming air to required temperature and humidity inside the pool. The theoretical part deals with literary research on the topic of humid air, evaporation from the water and the thermal load of the object. The experimental part deals with evaluation of the measured humidity and indoor temperature in a bathroom and in a swimming pool.
Precast load-bearing reinforced concrete structure
Lyčka, Lukáš ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
The aim of this thesis is to design main parts of the construction for concrete sports hall made from prefabricated elements. Designed elements are T-shaped prestressed roof truss, columns, slabs and continuous girders. This thesis contains engineering report, calculations and drawings of the designed parts.
Bridge over the Jevišovka river
Čípek, Luboš ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
This thesis focuses on design and assessment of load-bearing construction of a bridge over Jevišovka river at road I/53 near Lechovice. The bridge was designed as a trapezoidal cross-section slab. This solution was chosen from three sketch eventualities. The work includes an implementing engineering report, construction process report and report about static-analysis, the attachments include the sketch, vizualization, drawings, component drawing, construction process and the static-analysis of this structure. Computing of internal forces was performed by computational software Scia Engineer 17.
Design of the point supported slab of the house in Olomouc
Velešík, Marek ; Požár, Michal (referee) ; Klusáček, Ladislav (advisor)
The bachelor thesis is focused on the design of the point supported reinforced concrete slab of the apartment building on Litovelská street in Olomouc. The slab is situated above the ground floor. Static calculations are based on internal forces of the computational model created in software SCIA Engineer 17.01. The correctness of computational model was verified by the method of summary bending moments. The main focus of the thesis was design procedures and assessments of point supported slab according to Eurocode 2: Design of concrete structures – Part 1-1: General rules and rules for buildings (ČSN EN 1992-1-1). The control of the design of reinforcement was performed in software SCIA Engineer 17.01.
Cast-in-plase concrete member of multi-storey structures
Vařecha, Daniel ; Perla, Jan (referee) ; Strnad, Jiří (advisor)
The bachelor thesis is focused on the design and assessment of the supporting parts of the multi-story monolithic building of Větřní paper mill. Part of the thesis is accompanying report for static calculation and technical report on construction, visualization, static calculation and drawing documentation of shapes and reinforcement. Calculation of internal forces in the building was done in SCIA Engineer 17.1 software.
Concrete basement structure of family house on the slope
Čípek, Luboš ; Bažant, Zdeněk (referee) ; Strnad, Jiří (advisor)
This thesis focuses on design and assessment of load-bearing elements of a cast-In-place basement of a family house in Vranov. The thesis also includes a report about static analysis and the implementing engineerig report, vizualization of implementing, structural design report and the drawings of formworks and reinforcement. The calculation of the internal forces on floor slab over the basement was performed by the Dlubal RFEM software.
Comparison of tank variants from reinforced concrete and prestressed concrete
Vařecha, Daniel ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The thesis is focused on the design and assessment of two variants of tanks for wwtp. For comparison, a reinforced concrete tank and a prestressed concrete tank were designed. The work includes a data accompanying report for the static calculation and a technical report on the construction, static calculation and drawing documentation of shapes and reinforcement. The calculation of internal forces on the structure was performed in the SCIA Engineer 18.1 calculation software.
Bridge over the Jevišovka river
Čípek, Luboš ; Pachl, Radek (referee) ; Panáček, Josef (advisor)
This thesis focuses on design and assessment of load-bearing construction of a bridge over Jevišovka river at road I/53 near Lechovice. The bridge was designed as a trapezoidal cross-section slab. This solution was chosen from three sketch eventualities. The work includes an implementing engineering report, construction process report and report about static-analysis, the attachments include the sketch, vizualization, drawings, component drawing, construction process and the static-analysis of this structure. Computing of internal forces was performed by computational software Scia Engineer 17.
Comparison of tank variants from reinforced concrete and prestressed concrete
Vařecha, Daniel ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The thesis is focused on the design and assessment of two variants of tanks for wwtp. For comparison, a reinforced concrete tank and a prestressed concrete tank were designed. The work includes a data accompanying report for the static calculation and a technical report on the construction, static calculation and drawing documentation of shapes and reinforcement. The calculation of internal forces on the structure was performed in the SCIA Engineer 18.1 calculation software.

National Repository of Grey Literature : 16 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.