|
|
Dissolved and gaseous nitrogen losses in forests controlled by soil nutrient stoichiometry
Oulehle, Filip ; Chuman, T. ; Hruška, Jakub ; Krám, Pavel ; Navrátil, Tomáš ; Tesař, Miroslav ; Ač, Alexander ; Urban, Otmar
This study investigates the consequences of chronic nitrogen deposition in forests, including its effects on soil and surface water quality, and greenhouse gas emissions. To predict these effects, the authors explore the controls over dissolved and gaseous nitrogen fluxes in temperate forests. Their findings indicate that stream leaching losses of dissolved nitrogen correspond with the nutrient stoichiometry\nof the forest floor, with stream N losses increasing as ecosystems progress towards phosphorus limitation. Soil nitrogen storage increases with oxalate extractable iron and aluminium content. The authors estimate soil gaseous losses based on 15 N stocks, which averaged 2.5±2.2 kg N ha-1 year-1 , comprising 20±14% of total nitrogen deposition. They also extrapolate the current gaseous nitrogen loss flux from forests globally to be 8.9 Tg N year-1 , which represents 39% of current nitrogen deposition to forests worldwide.
|
|
|
Technology to remove nitrogen oxides (NOx) from flue gases for large combustion plants
Kučera, Jan ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
This diploma thesis deals with selected abatement techniques of nitrogen oxides (NOx) developed for large combustion plants. The first part describes selected NOx, their properties and explains the formation during combustion. Furthermore, there is an analysis of current legal legislation regulating the issue of emission limits. The third part presents selected primary and secondary measures that are widely used. The emphasis is placed on the description of selective catalytic (SCR) and non-catalytic reduction (SNCR). Finally, the basic design of these technologies for model combustion equipment is performed. The consumption of reducing medium and the volume of the catalyst for the mentioned techniques are calculated here. The estimate of selected operating and investment costs is a part of the basic scheme.
|
|
|
Design of WWTP at locality with extreme demands on quality of treated wastewater
Krupica, Radek ; Vachovec, Roman (referee) ; Hlavínek, Petr (advisor)
This diploma thesis deals with the wastewater treatment technologies by means of which high quality of the treated wastewater is attained, especially with regard to removing nutrients. The introduction of the thesis contains, among others, descriptions of the reserves in the Czech Republic where it is extremely important to insist on the highest quality of the discharged wastewaters. Then follows a summary of the quality requirements on the discharged wastewaters as stipulated in the legislation. Furthermore, I analyse the impact of the nutrients – nitrogen and phosphorus – on the environment and the principles of their removal from the wastewaters. In the next section I concentrate on the technological processes by means of which the required quality of the wastewater is achieved. The conclusion includes a list of technologies used as the tertiary wastewater treatments with emphasis on membrane technologies. The second part of my thesis is a study of a project of a wastewater treatment plant (WWTP) with membrane technology for the villages of Sloup and Šošůvka located within the protected landscape area of Moravian Karst.
|
|
|
Modern denitrification methods of coal fired boilers
Nárovec, Jiří ; Houdek, Ing Milan (referee) ; Skála, Zdeněk (advisor)
V současnosti musí velké energetické podniky k dodržení emisních předpisů, zejména pak vyžadovaných limitů NOx, uplatňovat denitrifikační metody. Tématem předkládané diplomové práce jsou moderních denitrifikační metody a jejich praktické uplatnění v lokálních poměrech uhelného kotle s parním výkonem 640 t.h-1 v elektrárně Počerady. Práce obsahuje rešerši moderních denitrifikačních metod používaných velkými uhelnými kotli se zaměřením zejména na sekundární denitrifikační metody. Jsou uvažovány dvě možné varianty denitrifikace – varianta 1 využívá selektivní katalytickou redukci (SCR) a varianta 2 selektivní nekatalytickou redukci (SNCR) společně s nízkoemisními hořáky a stupňovaným přívodem spalovacího vzduchu. Pro výběr vhodné denitrifikační metody jsou studovány investiční náklady jednotlivých variant – nižší investiční náklady (o 19.4%) slibuje varianta 2. Při srovnávání SCR se SNCR vyšlo najevo, že investiční náklady metody SNCR jsou 5krát nižší než metody SCR. V souladu s investičními náklady, s dispozicí kotle a se složitostí jeho instalace je pro navazující studium problematiky využita varianta 2. Stěžejní část práce se zabývá stanovením optimálního tzv. teplotního okna pro konkrétní metodu SNCR. Těžištěm práce je tepelný výpočet ohniště a části deskového přehříváku pro stanovený rozsah paliv a výkon kotle v rozmezí 60-100%. S uvažováním výsledků z výpočtu jsou navrženy dvě vstřikovací roviny, které mají zaručit vysokou efektivitu denitrifikačního procesu při uvažovaných provozních podmínkách kotle. Diplomová práce rovněž diskutuje obecnou vhodnost instalace SNCR a SCR ve stávajících uhelných kotlích.
|
|
| |
|
|
Laboratory test of denitrification inhibition
Marková, Jana ; Pániková, Kristína (referee) ; Malá, Jitka (advisor)
The bachelor thesis is focused on testing the influence of given parameters in order to maintain the required conditions of the denitrification inhibition test, developed at the Institute of Chemistry, Brno University of Technology. The aim of the bachelor thesis is to optimize the parameters of the laboratory test, which with such defined parameters will be used to test the effects of pesticides on the denitrification process and will allow monitoring the fate of these substances during the denitrification process. The theoretical part of this work describes the basic information about the denitrification process and the factors that directly affect it. The practical part describes the three gradually performed laboratory tests using appropriate analytical methods. The measurement results are compiled into tabular and graphic form. Based on a critical evaluation of these outputs was created a test methodology with optimized parameters.
|
|
| |
|
|
Removal of phosphorus in denitrifying bioreactor
Chlopčíková, Anna ; Hrich, Karel (referee) ; Malá, Jitka (advisor)
Nitrogen and phosphorus are involved in many processes on the Planet Earth. Especially in agricultural areas water is contaminated by nutrients, which can cause the eutrophication of surface waters, and other problems. The solution could be use of denitrifying bioreactors, which are used for the reduction of high nitrate concentrations in shallow groundwaters. The subject of the thesis was the study of phosphorus removal in the denitrification bioreactor by steel turnings, which are constituent part of the organic load of the bioreactor. Steel turnings release Fe, which causes the precipitation and adsorption of P. Eight bioreactors were filled with poplar woodchips. To these columns just above the surface were added model water enriched with nitrate nitrogen, phosphate phosphate was added to 4 columns, where two of them were enhanced by the addition of steel turnings upstream of the wood medium. Sampling and the analyses of the samples were determined weekly, determination of the phosphorus, iron and other substances necessary for the detection of processes in the bioreactor was performed. The dependence of phosphorus removal on the bioreactor operating conditions was evaluated based on measured data, and the effect of iron on the biological denitrification process was also assessed. Steel turnings have been found to be effective in removing TP, but it is necessary to solve iron leaching in the future. The concentration of phosphorus was reduced up to 0 mg/l on the effluent from the denitrification bioreactors, efficiency of phosphorus removal reached 100 %. The presence of steel chips had no effect on denitrification speed. The denitrification process was also successful in the phosphorus removal columns. From the point of view of leaching of substances and iron, the removal of N and P seems to be preferable in dry period during stoppage with no water fillings. Shutdown of bioreactors with flooded filling caused high concentrations of leached iron up to 149 mg/l
|
|
|
Effect of emergent micropolutants on the denitrification activity of activated sludge
Mosná, Silvia ; Stříteský, Luboš (referee) ; Hrich, Karel (advisor)
Diploma thesis Effect of emergent micropolutants on the denitrification process through activated sludge is focused on three specific substances. The substances under investigation are atrazine, terbutylazine and sulfametaxazole. Atrazine and terbutylazine are pesticides, particularly herbicides. Sulfametaxazole was chosen as a common antibiotic. The thesis is summarized into 10 chapters and conclusion. The work consists essentially of theoretical and practical part. Part of the theoretical part of the thesis is legislation that deals with the matters of the problem with micropolutants. The next chapter is an introduction to the issue, where we want to familiarize the reader with the current situation. There are also chapters on emergent micropolutants, denitrification and investigated substances. If we look at the practical part, there are chapters on sampling, evaluation of BATCH tests and evaluation of inhibition tests. There are also chapters on BATCH tests and respiratory inhibition test, which describe procedures of how we performed this test. Laboratory test reports are included in the Annex.
|
|
|
Microfauna of the activated silt from the biological sewage disposal plant in Kroměříž region.
Hrudíková, Radka ; Illková, Kateřina (referee) ; Omelková, Jiřina (advisor)
Bachelor thesis deals with the description and evaluation of micro fauna of activated sludge biological sewage waste water in Kromeriz region. Furthermore, morphological description and evaluation of sludge flocs. The thesis describes the types of biota (biocenosis), which may occur in the activation tanks. There are also mentioned other incidental methods of sewage treatment such as mechanical, chemical and physicochemical methods. The experimental section describes the experiment procedure, apparatus and methods use for assessment of activated sludge. In the results the data are processed into the synoptic charts and the accompanying tables. At the end the results are evaluated.
|
guest ::
