|
Demonstration Applications of PLC and Frequency Inverter
Šimco, Viktor ; Arm, Jakub (referee) ; Bradáč, Zdeněk (advisor)
The bachelor thesis is devoted to the description of the ACS880-01 frequency converter and the components of the demonstration panel. It includes a description of the frequency converter functions, its parameters, additional elements and safety options. It also briefly describes the asynchronous motor control, communication interfaces and possible add-on modules of the frequency converter. Subsequently, it includes the design of demonstration tasks and documentation of their implementation, SW equipment, visualization and configuration of the individual components.
|
|
Software-based Burglar Alarm Control Panel
Drzsík, Dávid ; Krajsa, Ondřej (referee) ; Strašil, Ivo (advisor)
This bachelor thesis is interested in integration of security systems into intelligent home networking. For showing the network’s functionality, a demonstration panel with Tecomat programmable logic controller is used. This thesis deals with usage of programmable logic controllers as central units for home security systems. Library with three function blocks for simplification of the module’s configuration, work with user passwords, mail sending and logging function is an output of this thesis. A virtual interface for simplifying the configuration of this security system is have also been created.
|
|
A Practical Panel for Smart Home Wiring
Pospíšil, Josef ; Steinbauer, Miloslav (referee) ; Kadlec, Radim (advisor)
This bachelor thesis deals with intelligent installations in buildings using centralised system inels. Individual components of this system, such as the central unit, power supply and separators, are described. Used busbars and their connection possibilities are mentioned in the next part together with different ways of access to the central unit. The thesis also includes the visualisation of the demonstration panel, which will be used as a model in laboratories. Next part consists of the basic functions simulation and verification of their functionality. Finally the formation of the panel together with its connection and programming is described. The panel documentation is enclosed at the end of the thesis.
|
|
A Sample ARC Detector Panel
Pala, Lukáš ; Valenta, Jiří (referee) ; Kadlec, Radim (advisor)
In the introduction an electric arcs creation in low voltage networks is discussed, followed by evaluation of verification measurements with AFDD. A serial arc generator is designed in accordance with easy manipulation and low maintenance requirements. Technological solution for safe fault simulation is described similarly as particular function sections of demonstration panel. Schematic diagrams of power and electronic circuits are attached.
|
|
Development of KNX installation demo-board
Mitrenga, Michal ; KNX), Josef Kunc (Národní asociace (referee) ; Fiedler, Petr (advisor)
The aim of this diploma thesis is to compile a demonstration panel as an example of the functions of intelligent electrical installation KNX. One of the advantages of this system bus is the ability to use devices from multiple manufacturers. A total of 20 devices from 12 different manufacturers are used in this work. The work begins with an explanation of the principle on which the KNX system bus works, followed by a description of the equipment used and the electrical connection of the switchboard according to the wiring diagram. Next, how the whole panel was revived is described. The next chapter contains a detailed description of device programming in ETS, ie setting parameters for individual devices and assigning group addresses. The last chapter deals with visualization and remote control. It explains how a communication channel was created to connect the panel to a server from FlowBox. Using the web interface on this server, a visualization was created, which can be used to remotely control the entire panel from anywhere.
|
|
Development of KNX installation demo-board
Mitrenga, Michal ; KNX), Josef Kunc (Národní asociace (referee) ; Fiedler, Petr (advisor)
The aim of this diploma thesis is to compile a demonstration panel as an example of the functions of intelligent electrical installation KNX. One of the advantages of this system bus is the ability to use devices from multiple manufacturers. A total of 20 devices from 12 different manufacturers are used in this work. The work begins with an explanation of the principle on which the KNX system bus works, followed by a description of the equipment used and the electrical connection of the switchboard according to the wiring diagram. Next, how the whole panel was revived is described. The next chapter contains a detailed description of device programming in ETS, ie setting parameters for individual devices and assigning group addresses. The last chapter deals with visualization and remote control. It explains how a communication channel was created to connect the panel to a server from FlowBox. Using the web interface on this server, a visualization was created, which can be used to remotely control the entire panel from anywhere.
|
|
A Sample ARC Detector Panel
Pala, Lukáš ; Valenta, Jiří (referee) ; Kadlec, Radim (advisor)
In the introduction an electric arcs creation in low voltage networks is discussed, followed by evaluation of verification measurements with AFDD. A serial arc generator is designed in accordance with easy manipulation and low maintenance requirements. Technological solution for safe fault simulation is described similarly as particular function sections of demonstration panel. Schematic diagrams of power and electronic circuits are attached.
|
|
Software-based Burglar Alarm Control Panel
Drzsík, Dávid ; Krajsa, Ondřej (referee) ; Strašil, Ivo (advisor)
This bachelor thesis is interested in integration of security systems into intelligent home networking. For showing the network’s functionality, a demonstration panel with Tecomat programmable logic controller is used. This thesis deals with usage of programmable logic controllers as central units for home security systems. Library with three function blocks for simplification of the module’s configuration, work with user passwords, mail sending and logging function is an output of this thesis. A virtual interface for simplifying the configuration of this security system is have also been created.
|
|
A Practical Panel for Smart Home Wiring
Pospíšil, Josef ; Steinbauer, Miloslav (referee) ; Kadlec, Radim (advisor)
This bachelor thesis deals with intelligent installations in buildings using centralised system inels. Individual components of this system, such as the central unit, power supply and separators, are described. Used busbars and their connection possibilities are mentioned in the next part together with different ways of access to the central unit. The thesis also includes the visualisation of the demonstration panel, which will be used as a model in laboratories. Next part consists of the basic functions simulation and verification of their functionality. Finally the formation of the panel together with its connection and programming is described. The panel documentation is enclosed at the end of the thesis.
|