|
|
Monitoring equipment of degradation processes for material of animal origin
Chmelař, Vít ; Skácel, Josef (referee) ; Adámek, Martin (advisor)
The diploma thesis introduces the reader to the problems of chemical sensors and the basics of degradation processes in materials of animal origin. It describes some types of sensors and their principles. Atmel ATmega328 microprocessor, its parameters and programming are described. In the next part of the thesis there is a proposal and production of equipment for monitoring of degradation processes in materials of animal origin. Sample sof chicken and milk were mesuared. From these measurements, the gas concentration values were determined, where samples can be considered suitable for consumation.
|
|
|
Processes of contact damage bearing materials
Chaloupka, Petr ; Dvořáček, Jiří (referee) ; Hort, Filip (advisor)
The focus of this bachelor’s thesis is treatise on processes of contact failures of bearings and theirs materials analyse type of degradation processes of material, contact fatigue strength and means of metering. In fine of bachelor’s thesis are given development of future tendencies in optimalization of bearings.
|
|
|
The effects of ionizing radiation on semiconductor devices properties
Yermalayeva, Darya ; Šteffan, Pavel (referee) ; Musil, Vladislav (advisor)
This master’s thesis deals with the problematics of influence of ionizing radiation on semiconductor devices and their properties. The aim of the thesis is to analyze the different types of radiation that can occur in the areas of application of these components. In the second part, the degradation processes are explored, with emphasis on the influence caused by the radiation dose. Also, the displacement damage and SEE effects are described, but just slightly, because they are not part of this work. The third part describes the device design process and harmful effects, that have to be considered during the design phase. In the forth and the fifth parts of this work were done modeling of radiation effects (influence of dose rate, Single-Event Upset and Total Ionizing Dose) in PSpice program and was carried out the possibility of designing a simple dosimeter with silicon diode. In conclusion, the results of the thesis are summarized and evaluated.
|
|
|
The application of legal standards in materials engineering
Večeřa, Petr ; Pantělejev, Libor (referee) ; Pavloušková, Zina (advisor)
The thesis describes points where the basic universal prescriptive system of law interferes with the questions of materials engineering. The main part of the thesis concerns legal liabilities, mainly civil liability represented with liability for defects. Basic analysis of chosen topics concerning liability for defects is done, defects are divided into groups as far as both technical and legal point of view is concerned. Consequently, the most common methods, principles and tests used for recognition and assessment of materials characteristics, both destructive and non-destructive, are described. Chapter, which deals with degradation processes follows. Integral part of the thesis are thoughts of possible types of legal liabilities, which could be important for materials engineers, with basic recommendations for contracting, as well as chosen problems connected with judicial proceedings and out of court settling of disputes. Technical standards are described with high attention, because both technical and legal public is not familiar with the legal background of technical normalisation.
|
|
|
Elimination of degradation processes of metallic thin films
Danovič, Jakub ; Šubarda, Jiří (referee) ; Šimonová, Lucie (advisor)
This work deals with issues of thin films, their behaviour in different enviroments and protection of theese films against unwanted degradation processes. Metal thin films are made by special physical or chemical methods in the presence of vacuum. Deposition is performed on properly cleaned substrate made of different materials, for example glass, ceramics or another metal. Theese films degrades under the influence of moisture, heat and other. There are several types of films on different bases made to prevent thin films against degradation.
|
|
|
Monitoring equipment of degradation processes for material of animal origin
Chmelař, Vít ; Skácel, Josef (referee) ; Adámek, Martin (advisor)
The diploma thesis introduces the reader to the problems of chemical sensors and the basics of degradation processes in materials of animal origin. It describes some types of sensors and their principles. Atmel ATmega328 microprocessor, its parameters and programming are described. In the next part of the thesis there is a proposal and production of equipment for monitoring of degradation processes in materials of animal origin. Sample sof chicken and milk were mesuared. From these measurements, the gas concentration values were determined, where samples can be considered suitable for consumation.
|
|
|
The effects of ionizing radiation on semiconductor devices properties
Yermalayeva, Darya ; Šteffan, Pavel (referee) ; Musil, Vladislav (advisor)
This master’s thesis deals with the problematics of influence of ionizing radiation on semiconductor devices and their properties. The aim of the thesis is to analyze the different types of radiation that can occur in the areas of application of these components. In the second part, the degradation processes are explored, with emphasis on the influence caused by the radiation dose. Also, the displacement damage and SEE effects are described, but just slightly, because they are not part of this work. The third part describes the device design process and harmful effects, that have to be considered during the design phase. In the forth and the fifth parts of this work were done modeling of radiation effects (influence of dose rate, Single-Event Upset and Total Ionizing Dose) in PSpice program and was carried out the possibility of designing a simple dosimeter with silicon diode. In conclusion, the results of the thesis are summarized and evaluated.
|
|
|
Elimination of degradation processes of metallic thin films
Danovič, Jakub ; Šubarda, Jiří (referee) ; Šimonová, Lucie (advisor)
This work deals with issues of thin films, their behaviour in different enviroments and protection of theese films against unwanted degradation processes. Metal thin films are made by special physical or chemical methods in the presence of vacuum. Deposition is performed on properly cleaned substrate made of different materials, for example glass, ceramics or another metal. Theese films degrades under the influence of moisture, heat and other. There are several types of films on different bases made to prevent thin films against degradation.
|
|
|
The application of legal standards in materials engineering
Večeřa, Petr ; Pantělejev, Libor (referee) ; Pavloušková, Zina (advisor)
The thesis describes points where the basic universal prescriptive system of law interferes with the questions of materials engineering. The main part of the thesis concerns legal liabilities, mainly civil liability represented with liability for defects. Basic analysis of chosen topics concerning liability for defects is done, defects are divided into groups as far as both technical and legal point of view is concerned. Consequently, the most common methods, principles and tests used for recognition and assessment of materials characteristics, both destructive and non-destructive, are described. Chapter, which deals with degradation processes follows. Integral part of the thesis are thoughts of possible types of legal liabilities, which could be important for materials engineers, with basic recommendations for contracting, as well as chosen problems connected with judicial proceedings and out of court settling of disputes. Technical standards are described with high attention, because both technical and legal public is not familiar with the legal background of technical normalisation.
|
|
|
Processes of contact damage bearing materials
Chaloupka, Petr ; Dvořáček, Jiří (referee) ; Hort, Filip (advisor)
The focus of this bachelor’s thesis is treatise on processes of contact failures of bearings and theirs materials analyse type of degradation processes of material, contact fatigue strength and means of metering. In fine of bachelor’s thesis are given development of future tendencies in optimalization of bearings.
|
guest ::
