|
|
Modifying of a passenger car door hinge
Čermáková, Klára ; Kozman, Zdeněk (referee) ; Píštěk, Václav (advisor)
This thesis introduces issues of passenger car side-door hinges. Practical part of this thesis deals with modifying the current low-cost side-door hinge for Edscha Automotive Kamenice s.r.o. First, material was chosen to decrease weight while maintaining the required mechanical properties. Then follows the detail design of the hinge model, which was created in the software program Catia. Heat and surface treatments are described. Both treatments ensures the hinge's final features. To verify the strength of the hinge, tensile and sag test was simulated in Ansys. Subsequently, record from the consultation of the hinge's manufacturability in series and the hinge’s cutting plans are provided. At the end of the thesis, the assembling procedure is suggested. Final part of the thesis compares the developed low-cost hinge against two similar side door hinges.
|
|
|
The manufacturing of sheet metal part by blanking technology
Suchomel, Lukáš ; Špaček, Jindřich (referee) ; Peterková, Eva (advisor)
The master’s thesis elaborates an optimum proposal of the production technology of a cutting – a part made of steel plate 11 320.3. The theoretical part represents the problematic issue of cutting technology and on the basis of this part was designed a production of components in processual tool. The processual tool is composed of normalized components and is resolved by using a easel, which is attached into the eccentric press LEXN 100 C (producer Toma Industries) with the nominal drawing force of 1000 kN. The press was chosen on the basis of technological calculations. The work contains necessary calculations, economical evaluation and design documentation of the cutting tool for the components production. The last part contains the technical and economic evaluation of the recently designed technology.
|
|
|
Proposal for the production of variants of flat sheet metal parts with holes
Hamáček, Petr ; Vonka, Vladimír (referee) ; Špaček, Jindřich (advisor)
HAMÁČEK Petr: Proposal for the production of variants of flat sheet metal parts with holes. The final work of bachalors studies, 3th grade, academic year 2008/2009. FME VUT in Brno, Institute of manufacturing technology, department of metal forming and plastics. Bachelor work elaborated in the scope of bachalor studies of the branch B2307 submitted variants of production for flat sheet metal parts with holes. Theoretical part of the thesis is pointed to theory of cutting and description of personál cutting process. Shearing machine LEPP with shearing force 1000 kN is selected. Blanking puch and blanking are made from 19 class alloyed instrumental steels, heat treated according to graphical documentation. Cuttingin machine is using standardized components and it is solved by particular frame into eccentric machine. In the work there are implied necessary calcullations for both variants including economical evaluation.
|
|
|
Evolutionary Algorithms for 2D Cutting Problem
Balcar, Štěpán ; Pilát, Martin (advisor) ; Mareš, Martin (referee)
Creation of optimal cutting plans is an important task in many types of industry. In this work we present a novel evolutionary algorithm designed to deal with this problem. The algorithm assumes rectangular shapes of the objects and creates a cutting plan which is can be cut out using a circular saw. The output is presented in a form usable by automatic saws as well as graphically. The algorithm reduces the amount of the material used and, moreover, also reduces the number of needed employees.
|
|
|
Evolutionary Algorithms for 2D Cutting Problem
Balcar, Štěpán ; Pilát, Martin (advisor) ; Mareš, Martin (referee)
Creation of optimal cutting plans is an important task in many types of industry. In this work we present a novel evolutionary algorithm designed to deal with this problem. The algorithm assumes rectangular shapes of the objects and creates a cutting plan which is can be cut out using a circular saw. The output is presented in a form usable by automatic saws as well as graphically. The algorithm reduces the amount of the material used and, moreover, also reduces the number of needed employees.
|
|
|
Modifying of a passenger car door hinge
Čermáková, Klára ; Kozman, Zdeněk (referee) ; Píštěk, Václav (advisor)
This thesis introduces issues of passenger car side-door hinges. Practical part of this thesis deals with modifying the current low-cost side-door hinge for Edscha Automotive Kamenice s.r.o. First, material was chosen to decrease weight while maintaining the required mechanical properties. Then follows the detail design of the hinge model, which was created in the software program Catia. Heat and surface treatments are described. Both treatments ensures the hinge's final features. To verify the strength of the hinge, tensile and sag test was simulated in Ansys. Subsequently, record from the consultation of the hinge's manufacturability in series and the hinge’s cutting plans are provided. At the end of the thesis, the assembling procedure is suggested. Final part of the thesis compares the developed low-cost hinge against two similar side door hinges.
|
|
|
The manufacturing of sheet metal part by blanking technology
Suchomel, Lukáš ; Špaček, Jindřich (referee) ; Peterková, Eva (advisor)
The master’s thesis elaborates an optimum proposal of the production technology of a cutting – a part made of steel plate 11 320.3. The theoretical part represents the problematic issue of cutting technology and on the basis of this part was designed a production of components in processual tool. The processual tool is composed of normalized components and is resolved by using a easel, which is attached into the eccentric press LEXN 100 C (producer Toma Industries) with the nominal drawing force of 1000 kN. The press was chosen on the basis of technological calculations. The work contains necessary calculations, economical evaluation and design documentation of the cutting tool for the components production. The last part contains the technical and economic evaluation of the recently designed technology.
|
|
|
Proposal for the production of variants of flat sheet metal parts with holes
Hamáček, Petr ; Vonka, Vladimír (referee) ; Špaček, Jindřich (advisor)
HAMÁČEK Petr: Proposal for the production of variants of flat sheet metal parts with holes. The final work of bachalors studies, 3th grade, academic year 2008/2009. FME VUT in Brno, Institute of manufacturing technology, department of metal forming and plastics. Bachelor work elaborated in the scope of bachalor studies of the branch B2307 submitted variants of production for flat sheet metal parts with holes. Theoretical part of the thesis is pointed to theory of cutting and description of personál cutting process. Shearing machine LEPP with shearing force 1000 kN is selected. Blanking puch and blanking are made from 19 class alloyed instrumental steels, heat treated according to graphical documentation. Cuttingin machine is using standardized components and it is solved by particular frame into eccentric machine. In the work there are implied necessary calcullations for both variants including economical evaluation.
|
|
|
Practical application of cutting problem with atypical targets
Marcineková, Petra ; Kalčevová, Jana (advisor) ; Šmídová, Milada (referee)
This bachelor work deals with one of the linear programming problems, the problem of optimal dividing of the material. The typical targets of these problems in classes is to minimize waste and minimize the material used. The aim of this work is the formulation of the unusual targets of this problem. These atypical targets include minimizing the number of cuts, counting waste nicked by cutting-off or to ensure a certain proportion of final products. Part of this work is the practical application of those unusual modifications of cutting problem.
|
guest ::
