|
|
Production of bottom body by solid forming
Kaděra, Jakub ; Štroner, Marek (referee) ; Kopřiva, Miloslav (advisor)
This diploma thesis, which has been elaborated within Master's study programme Manufacturing Technology and Management in Industry (2303T005), submits a production proposal of production of bottom body by solid forming and its economical evaluation containing all the economical essentials needed in order to produce and specify the final price of a forging. This thesis takes in all the necessary calculations and machinery proposals according to the material of dies and to annual capacity of 250 000 pieces of forgings requested. Semi-finished product for the manufacture of forging is cut size of bars of circular cross-section of steel 14 220 ČSN 42 5510.
|
|
|
Production sprocket
Diviš, Adam ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor)
The project elaborated design of technology production of the sprocket using die forging from steel C45. Pursuant to of the literary pursuit a problem of the die forging and calculation was designed manufacturing process for three operations. Dimensions of forging and tool are designed according to appropriate standards. Forging will be done on forging press LZK 1000 P/SH, with nominal tensile force 10 MN. Dies will be made from instrumental steel 19 662 heat-worked according to drawing documentation.
|
|
|
Production of carrier by forming
Pluskal, Martin ; Štroner, Marek (referee) ; Kopřiva, Miloslav (advisor)
The project elaborated in frame of the engineering studies branch N2326 presenting the design of manufacturing technology of forging carrier of steel 14 220. Pursuant to the literary pursuit a problem of solid hot forming was proposed to product by drop forging with flash on 3 forging operations. All the operations are realized on the vertical crank forging press LZK 4000 B produced by ŠMERAL BRNO a.s. with nominal forming force 40 NM. Heating material on the forging temperature 1100 °C will proceed in the electric induction furnace produced by ROBOTERM s.r.o. type KSO 800kW, the flash trimming on the trimming press LDO 315 A/S with nominal forming force 3,15 MN. Dies are made from tool steel 19 552.9 and strapped in die holder QLZK 4000/UC. A part of the project is technical economic analysis evaluation and elaboration of production scheme. Expected annual volume is 100 000 pieces.
|
|
|
Production of carrying body by solid forming
Dvořák, Jan ; Streid, Jan (referee) ; Kopřiva, Miloslav (advisor)
This diploma thesis has been elaborated within the Master's study that submits a production proposal of carrying body by solid forming. The forging has been performed using drop orging method at the crank forging press LZK 1000. Heating is inductive and flash trimming has been peformed in the trimming press LKOA 200. The used material of the forging is steel CSN 14 220. Production series is 100 000 pieces. A part of this thesis is calkulations, geometric design and economical evaluation.
|
|
|
Production of supporting holder by solid forming
Kopecký, Martin ; Podaný, Kamil (referee) ; Kopřiva, Miloslav (advisor)
This diploma thesis has been elaborated within the Master's study of department 2307 that submits a production proposal of supporting holder by solid forming. The used material of the forging is steel ČSN 12050 with yearly production of 100 000 pieces. The forging has been performed using drop forging method by two operations at the crank forging press LZK 1000, with induction heating of semi-finished product and flash trimming at the trimming press LKOA 200. For this method have been performed required technological calculations, geometric design of the die and assigning production machines needed for this technology. A part of this study is an economical evaluation where have been stated production expenses and prices of the forging of assigned component.
|
|
|
Production of support by forming
Palán, Robert ; Novotný, Karel (referee) ; Kopřiva, Miloslav (advisor)
PALÁN Robert, Production of support forming.A graduation thesis of master´s studies, Mechanical engineering, Department M2307 Metal forging technology, Specialization 02 Forming, Welding, 2. graduate, 2. year, school – year 2007/2008. FSI VUT Brno, ÚST Department of Metal Forging Technology, May 2008, page NO 66, picture NO 36, chart NO 8, suplement NO 12 The graduation thesis, drew up with in the frame of engeneering studies department M2307, submits a concept of a production by forming. A materiál of a forget piece is steel ČSN 12 050, provided as a semi – finished product in a form of a bar 210 mm, lenght 4 000 mm. The particular dimension stocks with be cut from it to forge out a part. Production work is 100 000 pcs. Based on studies of technologies, suitable for producing the part a specific two stage technology of a drop forging was chozen on a vertical forging press LMZ 6 500, with induction heating of the semi – finished product and a product – trim of fin and pellicle or a trimming press LDO 315 A/S. For this alternate all the required calculations are realized of swages and all the necessary machines for the production of are quested enganget part.
|
|
|
Production sprocket
Diviš, Adam ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor)
The project elaborated design of technology production of the sprocket using die forging from steel C45. Pursuant to of the literary pursuit a problem of the die forging and calculation was designed manufacturing process for three operations. Dimensions of forging and tool are designed according to appropriate standards. Forging will be done on forging press LZK 1000 P/SH, with nominal tensile force 10 MN. Dies will be made from instrumental steel 19 662 heat-worked according to drawing documentation.
|
|
|
Production of bottom body by solid forming
Kaděra, Jakub ; Štroner, Marek (referee) ; Kopřiva, Miloslav (advisor)
This diploma thesis, which has been elaborated within Master's study programme Manufacturing Technology and Management in Industry (2303T005), submits a production proposal of production of bottom body by solid forming and its economical evaluation containing all the economical essentials needed in order to produce and specify the final price of a forging. This thesis takes in all the necessary calculations and machinery proposals according to the material of dies and to annual capacity of 250 000 pieces of forgings requested. Semi-finished product for the manufacture of forging is cut size of bars of circular cross-section of steel 14 220 ČSN 42 5510.
|
|
|
Production of carrying body by solid forming
Dvořák, Jan ; Streid, Jan (referee) ; Kopřiva, Miloslav (advisor)
This diploma thesis has been elaborated within the Master's study that submits a production proposal of carrying body by solid forming. The forging has been performed using drop orging method at the crank forging press LZK 1000. Heating is inductive and flash trimming has been peformed in the trimming press LKOA 200. The used material of the forging is steel CSN 14 220. Production series is 100 000 pieces. A part of this thesis is calkulations, geometric design and economical evaluation.
|
|
|
Production of carrier by forming
Pluskal, Martin ; Štroner, Marek (referee) ; Kopřiva, Miloslav (advisor)
The project elaborated in frame of the engineering studies branch N2326 presenting the design of manufacturing technology of forging carrier of steel 14 220. Pursuant to the literary pursuit a problem of solid hot forming was proposed to product by drop forging with flash on 3 forging operations. All the operations are realized on the vertical crank forging press LZK 4000 B produced by ŠMERAL BRNO a.s. with nominal forming force 40 NM. Heating material on the forging temperature 1100 °C will proceed in the electric induction furnace produced by ROBOTERM s.r.o. type KSO 800kW, the flash trimming on the trimming press LDO 315 A/S with nominal forming force 3,15 MN. Dies are made from tool steel 19 552.9 and strapped in die holder QLZK 4000/UC. A part of the project is technical economic analysis evaluation and elaboration of production scheme. Expected annual volume is 100 000 pieces.
|
guest ::
