|
|
CFD simulation of fluid-induced vibration
Kubíček, Radek ; Vondál, Jiří (referee) ; Buzík, Jiří (advisor)
The presented diploma thesis focuses on flow-induced vibrations of a tube. The main aim and benefit is the analysis of tube stiffness in contact with the other one and the following use of obtained values and characteristics in CFD simulations. The work can be divided into three parts. The first part is about the current state of knowledge of flow-induced vibrations. It introduces the basic mechanisms of vibration and methods for their suppression. The second part deals with the determination of stiffness of defined geometry tube including the collision with the other tube. The final part demonstrates and evaluates the application of obtained characteristics in CFD simulations.
|
|
| |
|
|
Rolling Analysis of Turbocharger Pin Roller
Pazour, Martin ; Žatko, Miroslav (referee) ; Novotný, Pavel (advisor)
The subject of the diploma thesis is a description of movement of a roller which is a part of turbocharger. The diploma thesis is created in cooperation of the research department of Honeywell in Brno. The thesis consists of review concerning operating of turbochargers and possibilities of solving contact problems. Then static and dynamic conditions in contact are treated in the following part. Contact pressures are generated using numerical simulation in Ansys software. In the conclusion sizes and coefficients of friction which are recommended as the most suitable to achieve minimal wear of the components in contact.
|
|
|
Socio-cultural centre with townhall for the district Brno-Kohoutovice
Ľuptáková, Lenka ; Pechman, Tomáš (referee) ; Sochor, Jan (advisor)
The building of the town hall Brno Kohoutovice is situated on the site next to the local hospital. Currently, there is a widespread paved area, which has become the place for markets and other cultural activities. Town hall completed urban structure, built on the most visible plot, and closes the plaza on the east side. From the south, the square is open to Kohoutovická valley. It is closed and opened at the same time by a colonnade. Functional composition is expressed in both - size and material. On a solid concrete base, which holds cultural and social events, lie two light steel boxes dedicated to the town hall. The middle part is cantilivered into the square, which symbolizes the proximity of town hall offices to the citizens. It is dedicated to the departements, which are in daily contact with the public. The upper part with large terrace has representative function. There are the internal departements and a ceremonial hall.
|
|
|
Internet system for sending news by e-mail
Horák, Michael ; Strašil, Ivo (referee) ; Pavelka, Ondřej (advisor)
The thesis deals with project lay-out and realization of the internet system dedicated to sending newsletters via e-mail. It especially aims at working with contacts and putting them in groups, editation of pre-prepared texts and sending the e-mails themselves. In the theoretical part, there’s described main traits of PHP language. There’s also described methods of creating the web forms, handing over their inputs and processing of that data. Next, there’s closer look on the PHP functions, especially for text processing, programming structures and conditions. Other functions, that can be found in this thesis described, are meant for sending the e-mails, creating hashs and managing sessions. In practical part, the problems are described generally. In the next part of a practical realization, this methods are looked closer upon and described more thoroughly. Also there’s defined how does the scripts work and which functions are used to make it work.
|
|
|
Influence of essential parameters on the radial clearance and stress-strain states in ball bearings
Šperka, Václav ; Vrbka, Jan (referee) ; Fuis, Vladimír (advisor)
Master thesis is focused on the research of influence of selected substantial parameters on stress – strain states in the deep groove radial ball bearing. The influence of radial load is analyzed, such as the influence of size of the bearing and row of the bearing, also influence of radial clearance is quantified. Next, the influence of thermal distribution in the bearing is analyzed for different combinations of thermal distributions and radial clearances. Conclusions from analyses are then used in the last task – suggestion of radial clearance for customer – specified assembly. Problem is solved using the finite element method (FEM) in pre/post processor MSC.Patran and solver MSC.Marc. To make analyses faster the substantial parameters are implemented in the algorithm for automatic generation of the bearing calculation (batch file).The theme of this thesis was commissioned by ZKL - Research and development, a. s.
|
|
|
Calculation of heat and force field UniGear ZS1
Mokrý, Lukáš ; ABB, Drahomír Tůma, (referee) ; Dohnal, Petr (advisor)
The aim of my work is to describe high-voltage switchgear type UniGear 500R, which is part of UniGear switchgears family. I will focus on heating issue of one 500R unit and its parts during operation. Maximum values of this heating is limited by standards and can´t be exceed to ensure safe and reliable operation. That is why the heating tests are necessary part of designing and developing switchgears. Calculation will be made by two different ways. First is classic one-pole heating net method and second is numerical simulation in Solidworks flow simulation program. Except the theoretical description there will be presented also used 3D model and explanation of both method, used to calculation and simulation. Last point of this work is measuring of this type of switchgear and getting real data. The main point there is to compare measured values with values calculated and decide if is possible to simulate tests with appropriate accuracy. Then would be also possible to substitute the real test in laboratory, which costs many thousand crowns and takes lots hours of time. This work is collaborated with EJF division of ABB Company, where I am employed. Heating issues in this company is always on process, because of developing and improving of their products. So this work could be helpful in this field. ABB provides all materials needed, especially technical catalogues, 3D model and final values from laboratory measuring. Support from college faculty is mainly in study consultations and proposing of calculations making. In the end of work will be make final comparison and evaluation of achieved results.
|
|
|
Influence of the surface roughness features on the next rolling bearing element
Saksa, Vladimír ; Zapletal, Tomáš (referee) ; Košťál, David (advisor)
This bachelor thesis deals with investigation of influence of the surface roughness features on the next rolling bearing elements. It researches changes in the film profile entering into the contact. This thesis describes also elastohydrodynamic lubrication regime by witch each rolling bearing works as well as the difference between fully flooded and starvation contact of rolling ring with rolling bearing element. The part of the thesis is the experiment using different kinds of lubricats from which is visible really influence of these contacts. This experiment is realized on the contact simulator and the film thickness is measured using method of optical interferometry.
|
|
| |
|
|
Study of influence of input parameters for the numerical modeling of the compression test
Polách, Marek ; Keršner, Zbyněk (referee) ; Lehký, David (advisor)
The thesis analyses influence of input parametres of the 3D Non Linear Cementitious 2 material model for the numerical modeling of compression test performed in ATENA 2D and ATENA 3D software. The aim is to identify parametres with considerable influence and subsequently replicate the load-deflection curve obtained from laboratory compression test by numerical modeling. The effects of selected model and material model settings are studied on three kind of models in total. As tools for analyzing the effects, deterministic and statistic sensitivity analyses were chosen. Parametres with significant influence will be highlighted and added to the group of parametres obtained from numerical modeling of three-point bending test. This will create a set of parametres of considerable influence when it comes to modeling advanced structures with different types of stresses.
|
guest ::
