|
|
Parametric study of behavior of the structure of the wine cellar
Hajn, Jakub ; Janků, Hynek (referee) ; Horák, Vladislav (advisor)
In traditional wine village Bořetice recently occurred to serious disturbances on structures of wine cellars. These failures were caused by, among other things, changes in the properties of the rock environment. This work focuses on the implementation of parametric studies in terms of changing the properties of rock (soil) from the viewpoint of structural arrangement of the wine cellar.
|
|
|
Proposal for Brand Development
Brauner, Jakub ; Rampulová, Kateřina (referee) ; Zich, Robert (advisor)
Bakalářská práce je zaměřena na rozvoj značky malé realitní kanceláře APOLLO reality. Teoretická část je zaměřena na vymezení pojmů a postupů v oblasti brandingu a reality. Dále se zde vymezuje rámec pro rozvoj značky. V analytické části byla provedena interní analýza společnosti se zaměřením na byznysovou a brandingovou část firmy. V externí části analýzy byl proveden průzkum vnímání značky a posouzení vizuální identity hlavních konkurentů. Na základě výsledků analýz byl vytvořen návrh pro rozvoj značky a kontrolu značky. Součástí návrhu je i plán implementace změn a kalkulace nákladů.
|
|
|
The development of grouting for additional sealing of embankment dams
Michalčíková, Magdaléna ; Klablena,, Petr (referee) ; Drochytka, Rostislav (advisor)
Seal of sand or gravel by chemical injection is known and used for a long time. Chemical grouting are however expensive and sometimes the use of cement does not lead to desire effects. So it is trying to find new materials and methodologies injection arrangement works. To achieve savings of chemical products are added to a mixture clay and cement. Clay-cement grouting mix are used not only in order that they are better quality, but also because in this way proposed mixtures have a tendency to penetrate better into incoherent sediments that need additional sealant of chemical injection. For further possible reductions of economic terms the mixture is trying to replace the classic clay. As a suitable substitute for classic clay is to a certain extent the use of secondary raw materials. Above all it is fly ash. As a part of my thesis I deal with the appropriateness use of these materials and examining their properties in the mixture. It was found that by using fly ash were improving consistency of the fresh mixture, reducing the amount of water-cement ratio and reduce shrinkage of the mixture. On the other hand, by using fly ash has been increasing decantation, permeability atc. In the next stage of my work was examined the influence of the quality of cement, lime and liquefaction in the mixture. The aim of thesis is to propose the optimal injection mixture for additional sealing earth dams.
|
|
|
Influence of dosage of steel fibres on the loss of consistency of fresh concrete and compresive strength of hardened concrete.
Kuře, Václav ; Źalud, Oldřich (referee) ; Vymazal, Tomáš (advisor)
Bachelor work is focused on problems of a consistency of fresh fiber reinforced concrete. The consistency was characterized by a slump test and by a test of spilling how is it described in ČSN EN 12350. Obtained results are compared with a reference sample of a fresh concrete and between themselves. Further the work is focused on volumetric changes during maturation which are integral part of physical properties of the concrete. Influence of a dispersed reinforcement was monitored on the cube strength in plain pressure of individual mixed sample too. Total evaluation of tested parameters is states at the end of the work including comment about possible ways of interference of tests.
|
|
|
Possibilities of using recycled concrete as fine aggregate replacement in cement screeds
Nováková, Iveta ; Brožovský,, jiří (referee) ; Hubáček, Adam (advisor)
The bachelor thesis deals with summary of knowledge about cement-based screed with partial replacement of natural aggregates by recycled aggregates. Special emphasis is given to describing and studying characteristics of cement-based flowscreed. In this study are described feedstocks with requirements which they must meet and test methods for testing properties of screeds. One part is also given to practical application of cement-based flowscreed with partial replacement of natural aggregates by recycled aggregates.
|
|
|
Influence of fine particles granulometry on the physico-mechanical properties of concrete
Louda, Pavel ; Klečka,, Tomáš (referee) ; Ďurica,, Tibor (referee) ; Hubáček, Adam (referee) ; Hela, Rudolf (advisor)
The theoretical part describes the properties of fine-grained admixtures and the ways how these admixtures modify concrete properties. There are also described ways to assemble grain curves in the range 0-1000 m. The practical part describes the properties of all the concrete components used for the tests. From the admixtures and cement, the individual grain curves were compiled. Curves were assembled in the first stage manually by using MS Excel. Subsequently, a simple program was developed based on the knowledge of composing grain curves, which automatically compiles the grain curve according to the given limits. The maximum cement replacement was set at 25% by weight. The physical and mechanical properties of the graded curves thus established were first verified on mortar mixtures where the workability, bulk density and strength were verified at the age 7, 28 and 90 days. In addition, the porosity of cement cement with mercury porosimetry has been verified for selected recipes. The acquired knowledge was subsequently applied to the concrete in the laboratory. Here the maximum cement compensation was set at 30%. In particular, concrete consistency over time, air content in the concrete and compresive strength of concrete at the age 3, 7, 28 and 90 days were verified. Verification was also carried out in practice on the optimization of self-compacting concrete. Mechanical properties have been retained for optimized recipe but there were financial savings and CO2 emissions reductions compare with the original recipe.
|
|
| |
|
|
Lightweight plasters of modified composition for final surface treatment of ETICS
Neubauerová, Alena ; Ševčík, Milan (referee) ; Bydžovský, Jiří (advisor)
The diploma thesis is focused on the verification of the parameters of thin lightweight mineral plasters with modified composition. As alternative raw materials are used expanded perlite Vapex, calcined diatomite Celite and powder waste glass of fluorescent lamps. In the theoretical part is summarized knowledge from completed studies dealing with the issue of compensation porous filler component. In the experimental part is tested consistency of fresh mixture, physical-mechanical, sorption and thermal insulating characteristics. It is compared the appearance of the surface and summarized the results of measuring.
|
|
|
Improving Consistency in Text Recognition Datasets
Tvarožný, Matúš ; Hradiš, Michal (referee) ; Kišš, Martin (advisor)
This work is concerned with increasing the consistency of datasets for text recognition. This paper describes the problems that cause the inconsistency and then presents solutions to eliminate it. The effect of the properties of the polygons defining the text line boundaries and hence how the modified version of the dataset, which is composed of ideal text line variants, affected the accuracy of the model is investigated. Further, the work focuses on detecting and then removing or modifying text lines whose ground truth transcription does not match the actual text they contain. Experimentation showed that removing the visual inconsistency on the training set did not have a significant effect on the trained model, but modifying the test set improved the OCR accuracy of the model by 1.1\% CER. By modifying the dataset so that it did not contain mutually inconsistent pairs of recognized text and the corresponding ground truth, the model improved by a maximum of only 0.2\% CER after re-training. The main finding of this work is, above all, the proven beneficial effect of removing inconsistencies on test suites, thanks to which it is possible to determine a more realistic error rate of the OCR model.
|
|
|
Meshless methods for computational fluid dynamics
Niedoba, Pavel ; Zatočilová, Jitka (referee) ; Čermák, Libor (advisor)
The thesis deals with meshfree methods, especially the SPH method. It is focused on the question of convergence near the boundary of the problem domain and its following solution in the form of using the so-called ghost particles as a boundary condition. There is also presented a suitable setting of parameters for a shock tube 2D problem based on many tests and software modifications.
|
guest ::
