|
|
Design and Review of Locally Supported Ceiling Plates
Tesař, David ; Šulák, Pavel (referee) ; Švaříčková, Ivana (advisor)
The paper is focused solutions locally supported reinforced concrete floor slab above 1.NP. To solve internal forces used finite element. Results of the finite element method will be compared with results from the simplified calculation methods. Dimensioning construction will be carried out according to ČSN-EN 1992-1-1 for ultimate limit state. It will be constructed model design, structural analysis, design documentation and accompanying Report.
|
|
| |
|
|
Preparation and Realization of Technical Survey of the Building
Brothánek, Jan ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
This thesis covers structural-technic research of family house situated in Brno. In the first part of thesis I discuss theoretical explanation of structures situated in the object and its assessment in vterms of structural engineering research. Goal of this research is to estimate strength of masonry. These properties are calculated in practical part of this thesis. Last part of thesis summarizes previous calculations of strength of masonry.
|
|
|
Reinforced concrete structure of the apartment building
Tmej, Patrik ; Laníková, Ivana (referee) ; Šulák, Pavel (advisor)
The aim of the thesis is the assessment of choice elements of a four-storey residential building in Litomyšl from the static point of view based on the real project documentation. The thesis specifically follows up girder, columns of circular cross section, internal bearing walls and staircase. Finally, the thesis contain assessment designed ceiling structure and the proposal of alternative solutions. Results determine the reinforcement of selected elements of project documentation and assess whether they meet the load exerted.
|
|
|
Construction technology project of the apartment building in Velká Bíteš
Sotolář, Václav ; Brandtner, Michal (referee) ; Venkrbec, Václav (advisor)
The subject of this final thesis is the construction technology project of an apartment building in Velká Bíteš. The thesis contains a technical reports, construction technology study, coordination situation, time schedule and financial plan of the building in the structure of individual construction object, time schedule of the main building, solution of transport routes, technological regulation for the ventilated facade, control and test plan of the ventilated facade. Furthermore, a design of the construction site equipment is prepared, including a technical report, Occupational Health and Safety on the construction site for the superstructure construction phase, budget for the superstructure construction phase and a comparison of variants of the ceiling structure. Finally, a comparison of lifting mechanisms, LEED certification and assessment of photovoltaic facades is processed.
|
|
|
Gross superstructure of a residential building
Duda, Martin ; Hanzelková, Martina (referee) ; Kantová, Radka (advisor)
The main construction work is subject to technological solution vertical and horizontal constructions of residential building in Opava. Bachelor's thesis solves construction progress itself, used technologies and ensuring required conditions for safe and stepless constructing. The basis for the development of the project was the partial implementing documentation of the building.
|
|
|
Concrete ceiling over stage
Tošenovjan, Marek ; Šimůnek, Petr (referee) ; Perla, Jan (advisor)
This thesis is focused on the design of monolithic ceiling structure above the stage of the theater. The requirements for placement of an theatrical equipment are respected in the calculation of internal forces. Special emphasis is placed on the calculation of support moments in a partial fixation of the ceiling frame in a reinforced concrete wall. The structural design is limited by deflection limits affecting the functionality of theatrical equipment.
|
|
|
Static solution of a typical floor of an apartment building in Oslavany
Kurtin, Ladislav ; Šimek, Ondřej (referee) ; Zich, Miloš (advisor)
The bachelor thesis deals with the structural design of a typical floor of a residential building in Oslavany. The first part deals with the design of the ceiling structure above the second floor and the construction of the staircase. Using a slab model in SCIA Engineer 22.0, the internal forces on the floor slab were determined and the structure was assessed for ultimate limit state and serviceability limit state. The staircase was modeled with a member and slab model. Finally, a simplified assessment of the ceramic block masonry, specifically the intermediate bearing and perimeter walls, was performed. The bachelor thesis contains the structural calculation and drawings of the above mentioned elements.
|
|
|
Construction technology project of the apartment building in Velká Bíteš
Sotolář, Václav ; Brandtner, Michal (referee) ; Venkrbec, Václav (advisor)
The subject of this final thesis is the construction technology project of an apartment building in Velká Bíteš. The thesis contains a technical reports, construction technology study, coordination situation, time schedule and financial plan of the building in the structure of individual construction object, time schedule of the main building, solution of transport routes, technological regulation for the ventilated facade, control and test plan of the ventilated facade. Furthermore, a design of the construction site equipment is prepared, including a technical report, Occupational Health and Safety on the construction site for the superstructure construction phase, budget for the superstructure construction phase and a comparison of variants of the ceiling structure. Finally, a comparison of lifting mechanisms, LEED certification and assessment of photovoltaic facades is processed.
|
|
|
Preparation and Realization of Technical Survey of the Building
Brothánek, Jan ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
This thesis covers structural-technic research of family house situated in Brno. In the first part of thesis I discuss theoretical explanation of structures situated in the object and its assessment in vterms of structural engineering research. Goal of this research is to estimate strength of masonry. These properties are calculated in practical part of this thesis. Last part of thesis summarizes previous calculations of strength of masonry.
|
guest ::
