|
|
Workplace for measuring capacity and rate-capability characteristics of lithium-ion batteries
Cápal, David ; Máca, Josef (referee) ; Libich, Jiří (advisor)
This master's thesis deals with the issues of lithium-ion batteries, describing common types of commercial lithium-ion batteries, their advantages, disadvantages, and characteristic properties. The thesis focuses in more detail on the influence of temperature on the characteristics of lithium-ion battery. The thesis describes the design and construction of a workplace for measuring capacity and rate-capability characteristics of lithium-ion batteries at low and high temperatures. The thesis also describes the implementation of a cooling and heating module using a system based on Peltier devices.
|
|
| |
|
|
Universal Tester of Radio Conditions for Narrowband IoT Communication Technology
Možný, Radek ; Štůsek, Martin (referee) ; Mašek, Pavel (advisor)
Technology Narrowband IoT is a representative LPWA (Low Power Wide Area) tech-nology that due to its promising features aims for demands of the Internet of Thingsapplications for autonomous data sending from sensors in areas of poor mobile coverage.For such applications, it is beneficial to firstly map properties of communication technol-ogy in areas of intended use and evaluate whether or not is this technology applicable.This Master thesis deals with the design of the hand-held measuring device for evaluationof Narrowband IoT properties. The output of this thesis is firstly comparison of LPWAtechnologies secondly, design of the mentioned device and verification of its functional-ity. And in last part description of measurement of transmission delay for delay-tolerantapplications. Transmission delay is a critical parameter for delay-tolerant applications.Such an application can be, for example, smart electrometers for which there is definedmaximal allowed transmission delay of 10 seconds and therefore it is desirable to evalu-ate whether or not is the deployment of the communication technology Narrowband IoTsuitable in the intended area for delay-tolerant or even for delay-intolerant applications.
|
|
|
The influence of electrolyte additives to lead-acid batteries properties
Dohnal, Martin ; Zimáková, Jana (referee) ; Bača, Petr (advisor)
This day is a lead battery is most prevalent in the automotive industry. Which is a source of energy when starting the car. In recent times the battery is used not only for startups, but also when driving in city traffic. This behavior can know the concept of a hybrid car. Which is used an electric motor which as a result reduce emissions standing cars in cities. The electric motor is powered by lead-acid battery and a rapid discharging and reducing battery life. To extend the life developed additives to the electrolyte. In the thesis, these additives investigated. If they really have a positive effect on the battery.
|
|
|
The examination of the effect of titanium dioxide on the properties of lead-acid batteries
Mlýnek, Martin ; Vaněk, Jiří (referee) ; Bača, Petr (advisor)
Despite, considerable advances in technologies for storing electrical energy, lead-acid batteries are still the most widely used these days even it was invented more than a century ago. The functionality remains the same since its invention. Today´s time puts certain pressure on improving some aspects of the functionality like, heat management, charging and discharging speed, capacity and durability etc..... This bachelor´s thesis is based on the last mentioned, Durability,. The work presents the theory of acid batteries with the history of chemical reaction, technological production processes and battery construction. It is followed by a chapter about titanium and titanium dioxide as an addition of negative active mass where all the aspects are being examined in this work.
|
|
|
Design of a mobile battery manipulator
Pliešovský, Libor ; Štěpánek, Vojtěch (referee) ; Hermanský, Dominik (advisor)
The aim of the bachelor's thesis is research for mobile battery manipulators with barrels for the food and pharmaceutical industries, as well as design and calculations. There is comparison of industrial and pharmaceutical manipulators in the introductory part of the research. According to the research, a conceptual design was prepared, which is further dealt with in the chapter of calculations focusing on the drive system. The last chapter deals with the selection of a suitable battery.
|
|
|
Proposal for power consumption optimization of photovoltaic power plant
Mareček, Jan ; Radil, Lukáš (referee) ; Baxant, Petr (advisor)
This master’s thesis is focused on opportunities of optimization of electric power consumption from photovoltaic power plant. In theoretical part are presented basic principles and possibilities of photovoltaic system connection. It continues with an overview of backup systems and types of batteries. Practical part is about prediction of production and consumption of electric power, possibilities of power management and optimization. Next chapter deals with battery life cycle and their suitability for photovoltaic system. The last part of this thesis is the quantification of the stored electric energy economic value.
|
|
|
Workplace for measuring capacity and rate-capability characteristics of lithium-ion batteries
Cápal, David ; Máca, Josef (referee) ; Libich, Jiří (advisor)
This master's thesis deals with the issues of lithium-ion batteries, describing common types of commercial lithium-ion batteries, their advantages, disadvantages, and characteristic properties. The thesis focuses in more detail on the influence of temperature on the characteristics of lithium-ion battery. The thesis describes the design and construction of a workplace for measuring capacity and rate-capability characteristics of lithium-ion batteries at low and high temperatures. The thesis also describes the implementation of a cooling and heating module using a system based on Peltier devices.
|
|
|
Design of a mobile battery manipulator
Pliešovský, Libor ; Štěpánek, Vojtěch (referee) ; Hermanský, Dominik (advisor)
The aim of the bachelor's thesis is research for mobile battery manipulators with barrels for the food and pharmaceutical industries, as well as design and calculations. There is comparison of industrial and pharmaceutical manipulators in the introductory part of the research. According to the research, a conceptual design was prepared, which is further dealt with in the chapter of calculations focusing on the drive system. The last chapter deals with the selection of a suitable battery.
|
|
|
Universal Tester of Radio Conditions for Narrowband IoT Communication Technology
Možný, Radek ; Štůsek, Martin (referee) ; Mašek, Pavel (advisor)
Technology Narrowband IoT is a representative LPWA (Low Power Wide Area) tech-nology that due to its promising features aims for demands of the Internet of Thingsapplications for autonomous data sending from sensors in areas of poor mobile coverage.For such applications, it is beneficial to firstly map properties of communication technol-ogy in areas of intended use and evaluate whether or not is this technology applicable.This Master thesis deals with the design of the hand-held measuring device for evaluationof Narrowband IoT properties. The output of this thesis is firstly comparison of LPWAtechnologies secondly, design of the mentioned device and verification of its functional-ity. And in last part description of measurement of transmission delay for delay-tolerantapplications. Transmission delay is a critical parameter for delay-tolerant applications.Such an application can be, for example, smart electrometers for which there is definedmaximal allowed transmission delay of 10 seconds and therefore it is desirable to evalu-ate whether or not is the deployment of the communication technology Narrowband IoTsuitable in the intended area for delay-tolerant or even for delay-intolerant applications.
|
guest ::
