|
|
Reactivity and controll of properties of metallic materials
Kouba, Jan ; Richtera, Lukáš (referee) ; Zmrzlý, Martin (advisor)
This study deals with properties of aluminum alloys that are used in aerospace industry, particularly with alloy 2024. In introduction, the fundamental questions of metallurgy of aluminum alloys and their basic properties are summarized. Then the specific parameters of alloy 2024 are commented. It is followed by short summary of aluminum inorganic chemistry and chemistry of its compounds. Next chapter is an introduction to corrosion and description of its particular forms. The following section sets out a summary of results of recent research in the field of aluminum alloys corrosion, some details about corrosion product analysis and published results concerning hypochlorites, what is the key substance in experimental part. The experimental part is focused on the influence of temperature and concentration of sodium hypochlorite solution on corrosion of Al 2024, cladded by pure aluminum.
|
|
| |
|
|
The corrosion study of part aircraft at the site of spot welds in the salt spray environment
Němčíková, Eva ; Doležal, Pavel (referee) ; Pacal, Bohumil (advisor)
This bachelor’s thesis is focused on the corrosion study of part aircraft at the site of spot welds in the salt spray environment. The panel is made of sheet of aluminium alloy AlCu4Mg1, with surface coated with aluminium of purity 99,5 %, and of square shapes of alloy AlCu4Mg1, without coating. Square shapes are an angle cleat. The thesis deals with corrosion characteristics at the site of spot welds and in the area of contact between them. It deals with character of corrosion, frequency of occurrence and range of corrosive attack. From the data files were detected critical places of construction.
|
|
|
Measurement of corrosion resistance of anodized aluminum protective surface layers
Redr, Martin ; Jandová, Kristýna (referee) ; Chladil, Ladislav (advisor)
This master’s thesis is focused on anodic oxidation of an aluminium surface with subsequent sealing of the surface using mid-temperature sealing methods. The research in the theoretical part of the thesis is carried out in surface treatments of aluminium and its alloys, where attention is mainly paid to anodic oxidation, as it is the most widely used surface treatment. The second discussed and at the same time key topic is the sealing process of the anodic coating, which has a fundamental effect on the quality of the corrosion resistance of the resulting surface. In the practical part of the thesis, a number of anodic oxidation experiments with subsequent sealing of the coating on prepared aluminium samples and their subsequent evaluation according to ČSN EN ISO 3210 standard were carried out. Mid-temperature sealing experiments were mainly focused on the use of triethanolamine (TEA), which seems very promising in terms of the resulting sealing quality.
|
|
|
Experimental testing of hydrocyclone
Juráš, Filip ; Hudec, Martin (referee) ; Rudolf, Pavel (advisor)
This bachelor thesis is focused on experimental testing of hydrocyclone. The work is divided into two parts. The first part describes basic parts of hydrocyclone, dimensions, and operating parameters of the tested hydrocyclone and principles of its work. The second, practical part, describes the general preparation of the experiment, which started with searching for a suitable material and continued to the filter device used for particle separation.
|
|
|
Optimization of metallurgical processes in aluminum alloys foundry
Halaška, Jan ; Lána, Ivo (referee) ; Kaňa, Václav (advisor)
Diploma thesis examines the influence of the preparation and metallurgical treatment on the mechanical properties and structure of aluminium alloys Al-Si. The experimental part was carried out at MSR Engines s.r.o. This part describes the current (sodium modification) and newly proposed (strontium modification) state of preparation and metallurgical processing of melt. There is state the course of experimental melting processes, testing of samples, evaluation of tests and observation of the impact of individual modifiers on the structure.
|
|
|
Evaluation of cold kinetic deposition technology (Cold Spray)
Buček, Tomáš ; Zimáková, Jana (referee) ; Binar, Tomáš (advisor)
Cold spray or Cold gas dynamic spraying is actually new process for coating application. Origin of Colds technology spray is thermal spray. Cold spray technology has some advantages therefor any other common thermal technology. Cold spray technology has unique properties mainly due to low deposition temperatures and the physical principle of layer growth. Master’s thesis has focused on the possibility of use for corrosion protection. Accelerated corrosion tests were performed in a condensation chamber with samples of aluminium substrate and low pressure cold sprayed copper layer. The formation of corrosion was evaluated by acoustic emission and metallographic analysis. The anti-corrosion properties of copper have been considered in practical design, as have the unique antibacterial and virus inactivating properties.
|
|
|
Plasma cutting by TransCut 300.
Bergauer, Radek ; Hála, Michal (referee) ; Kubíček, Jaroslav (advisor)
The thermal parting by plasma is progressive technology of material cutting. There is a new method based on the plasma stabilization by the steam, beyond common systems with gas stabilization. The potentialities of cutting by steam stabilized plasma are tested and the results are compared with regular gas plasma in this diploma thesis.
|
|
|
Preparation of ceramic-metal composites for ballistic protection
Hladík, Jakub ; Roleček, Jakub (referee) ; Salamon, David (advisor)
Cílem této práce je příprava keramicko-kovového kompozitu pro balistickou ochranu. Přičemž velká pozornost se klade na rozhraní obou materiálů. Práce popisuje jak vlastnosti používaných keramik a kovů, tak i aplikovatelné mechanické testy Kompozit na bázi oxidu hlinitého a hliníků byl experimentálně připraven metodou gravitačního lití / slinování hliníků, která vedla ke spojení s korundovými hexagony. K dosažení optimálního výsledku a co nejnižší teplotě lití bylo třeba vyzkoušet několik teplotních režimů. Připravené vzorky byly balisticky testovány na základě norem NIJ Standard- 0108.01 a NATO Standard STANAG 2280. Vlastnosti rozhraní byly ověřeny pomocí lomové analýzy vzorků, která zkoumala vzorky poškozené balistickým testováním. Za účelem zkoumání rozhraní byla připraveny speciální zkouška čtyřbodým ohybem. Dále bylo provedeno předběžné zkoumání mikrostruktury hliníku.
|
|
|
Study of the properties of laser welds aluminum alloy grade 5000
Černohous, Filip ; Kubíček, Jaroslav (referee) ; Mrňa, Libor (advisor)
In working to address the properties of laser welds of aluminum class 5000th These alloys are characterized by low strength and good corrosion resistance. Created a few sample welds on Yb-YAG optical laser, which is subjected to mechanical testing . Procedures are provided in the work of laser technology and welding, as well as general properties and defects in welds. Made welds was evaluated and listed the best welding parameters of the studied process parameters .
|
guest ::
