|
|
Class AB audio amplifier for two satellites and subwoofer
Cupák, Jan ; Brančík, Lubomír (referee) ; Kratochvíl, Tomáš (advisor)
This bachelor’s thesis deals with design of AB class audio amplifiers. Further more it deals also with other functional blocks, e.g. preamplifier, tone equalizer and active crossover. Outcome of this work is a complete solution of the amplifier with it's simulation. In final solution is also included scheme of a high quality power supply unit, speaker protection and heat sinks for high performance transistors. In this project is also included a solution of task about optimal mechanical arrangement of the single parts in the case of this amplifier. This thesis contains results of measurement and photo document of functional prototype.
|
|
|
Design of Input Stage for Bi-Amp Loudspeaker System
Ryšavý, Jindřich ; Hanák, Pavel (referee) ; Schimmel, Jiří (advisor)
The thesis discuss the desing of active crossover for loudspeaker systems. There are described two most common topologies forming active filters and their comparison. Also is there shown way how to desing transfer functions to achieve flat overall transmission, then computing components bases on topology. All that is shown on example. Then are discussed different ways how to correctly receive analog or digital sound signal and handle with them. Example desing is then shown.
|
|
|
Design and Implementation of Active Loudspeaker System with Digital Input
Uchytil, Filip ; Balík, Miroslav (referee) ; Schimmel, Jiří (advisor)
The work is focused on a design of an active loudspeaker system with a bi-amp amplifier and a digital input. There is described the theory of a loudspeaker enclosure design and its practical implementation. Furthermore the work deals with a design and construction of input circuits such as a preamplifier, Baxandall tone control, active crossover, all-pass filter and S/PDIF. On the basis of the amplifier´s theory the optimal construction of amplifiers and their design are selected. The complex design of the loudspeaker box is devised so that it would reach a maximum acoustic power during the preservation of a low distortion.
|
|
|
Influence of drivers position on the characteristics of the loudspeaker system
Bičan, Jan ; Schimmel, Jiří (referee) ; Balík, Miroslav (advisor)
This thesis deals with the measurement and description of properties of the two-way variable modular loudspeaker system marked as OM-3, especially the influence of the mutual position of drivers on its characteristics. The thesis examines individual factors taking their contribution on characteristics of the loudspeaker system in total. Further it measures and evaluates options of compensations of mutual position changes of drivers using an all-pass filter. Within this thesis is also included laboratory task preparation which is focused on this problematics.
|
|
|
Class D audio amplifier for active loudspeakers
Cupák, Jan ; Punčochář, Josef (referee) ; Kratochvíl, Tomáš (advisor)
This master's thesis deals with design of D class audio final amplifier, which was output power 400 W for 4 ? load impedance. Designed audio amplifier is specifical for active speaker, which consists of satelite speakers and subwoofer. Further more it deals also with other functional blocks, e.g. balanced input preamplifier, active crossover and protection for safety running. Outcome of this work are schemes of each functional blocks of D class audio amplifier, whose functionality was verified by simulation. Thesis also contains full reference material including mechanical arrangement of functional blocks on printed connection board. The conclusion contains the measured parameters of function blocks of produced prototype and complete photographic documentation.
|
|
|
Automotive audio amplifier and subwoofer
Kolka, René ; Šotner, Roman (referee) ; Dřínovský, Jiří (advisor)
This thesis deals with the project of two performance amplifiers for a subwoofer and for four basic car loud-speakers. The following part of the thesis is dealing with the power circuits of the amplifiers. The control of the amplifiers is realized by processor. The thesis is also dealing with the problems caused by sound system installation in a car, and concerns mainly with the boosters position and with producing high quality subwoofer and baffle-board.
|
|
|
Influence of drivers position on the characteristics of the loudspeaker system
Bičan, Jan ; Schimmel, Jiří (referee) ; Balík, Miroslav (advisor)
This thesis deals with the measurement and description of properties of the two-way variable modular loudspeaker system marked as OM-3, especially the influence of the mutual position of drivers on its characteristics. The thesis examines individual factors taking their contribution on characteristics of the loudspeaker system in total. Further it measures and evaluates options of compensations of mutual position changes of drivers using an all-pass filter. Within this thesis is also included laboratory task preparation which is focused on this problematics.
|
|
|
Design of Input Stage for Bi-Amp Loudspeaker System
Ryšavý, Jindřich ; Hanák, Pavel (referee) ; Schimmel, Jiří (advisor)
The thesis discuss the desing of active crossover for loudspeaker systems. There are described two most common topologies forming active filters and their comparison. Also is there shown way how to desing transfer functions to achieve flat overall transmission, then computing components bases on topology. All that is shown on example. Then are discussed different ways how to correctly receive analog or digital sound signal and handle with them. Example desing is then shown.
|
|
|
Automotive audio amplifier and subwoofer
Kolka, René ; Šotner, Roman (referee) ; Dřínovský, Jiří (advisor)
This thesis deals with the project of two performance amplifiers for a subwoofer and for four basic car loud-speakers. The following part of the thesis is dealing with the power circuits of the amplifiers. The control of the amplifiers is realized by processor. The thesis is also dealing with the problems caused by sound system installation in a car, and concerns mainly with the boosters position and with producing high quality subwoofer and baffle-board.
|
|
|
Class AB audio amplifier for two satellites and subwoofer
Cupák, Jan ; Brančík, Lubomír (referee) ; Kratochvíl, Tomáš (advisor)
This bachelor’s thesis deals with design of AB class audio amplifiers. Further more it deals also with other functional blocks, e.g. preamplifier, tone equalizer and active crossover. Outcome of this work is a complete solution of the amplifier with it's simulation. In final solution is also included scheme of a high quality power supply unit, speaker protection and heat sinks for high performance transistors. In this project is also included a solution of task about optimal mechanical arrangement of the single parts in the case of this amplifier. This thesis contains results of measurement and photo document of functional prototype.
|
guest ::
