National Repository of Grey Literature 8 records found  Search took 0.00 seconds. 
Contribution to the construction of cost and energy efficient family houses
Čech, Josef ; Mohelníková, Jitka (referee) ; Gašparik,, Jozef (referee) ; MBA, Pavel Slováček, (referee) ; Hrazdil, Václav (advisor)
Dissertation focuses on the verification of construction family houses made of concrete shell block with internal thermal insulation system. The construction technology is transferred to the Czech Republic from France. The work focuses on building envelope. The suitability of implementation is assessed on the basis of verification selected thermal technical requirements placed on building envelope. Requirements are specified by legislation in force in the ČR. The verification was performed by using software simulations and measurements on realized buildings. Critical areas of construction technology were identified on the basis software simulations and measurements on site. It was suggested solution, in which critical areas comply the thermal technical requirements. The building envelope was checked also using the thermography imaging on site. Continuous measurement of interior temperature was used to evaluate thermal comfort in the room. In the completed buildings was tested airtightness of the building envelope, which revealed other critical areas of the building envelope. Critical areas are necessary to solve with sufficient care. The economic cost of implementing each variants of exterior walls made of concrete shell block with internal thermal insulation were compared with the economic costs of implementing external walls made of burnt clay hollow blocks and made of burnt clay hollow blocks with external thermal insulation system ETICS. Subsequently, the economic return was calculated for individual variants of external walls made of concrete shell blocks with internal thermal insulation. From the environmental viewpoint was made comparison of production greenhouse gas CO2 and SO2 (cause acid rains) during the life cycle of the individual variations of exterior walls made of concrete shell blocks with system of internal thermal insulation, exterior walls made of burnt clay hollow blocks and burnt clay hollow blocks with external thermal insulation syst
Parish church, Brno - Líšeň
Jurák, Vítězslav ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
This diploma thesis, called „Parish church, Brno-Líšeň“, is compiled as documentation for building construction. There is one complex building situated in slope. Therefore it consists of one partly underground floor and first floor. It is divided into three sections. Central part is designed as round-shaped body of the church with tower in the southern part of the church. Shed roof has an angle of 7° for body and an angle of 13° for tower. From the western side there is an administrative area connected to the church and from eastern side there is a community area which is supposed to be used as residential premises. Roof of both these parts is constructed as flat vegetative roof. Structural design is systemic, Velox. Foundation construction combines concrete and ferro-concrete belts and footing.
The Designs for Transformation of Bata's Architecture in Letná District, Zlín
Vaňková, Lenka ; Bergmann, Ivan (referee) ; Zemánková, Helena (advisor)
The aim is to examine the possibility of increasing surface standard with varying intensity interventions and proposals for improvement of the technical condition of the building. Suggest three basic variants of reconstruction A, B, C according to the type, shape and position of the staircase. For a detailed elaboration select one variant - C2. Designing the two approaches to improve the technical condition of the building and internal microclimate - internal and external insulation. Both approaches are compared and evaluated their pros and cons.
Advanced methods of application of thermal techniques in the design of heating buildings
Mikoláš, Petr ; Vyhlídalová, Karolína (referee) ; Horák, Petr (advisor)
The diploma thesis is divided into three parts. The first part is theoretical devoted to the introduction of BETONG building material. And next It is also devoted to themes of low - energy buildings and nearly zero-energy buildings, heat sharing and thermal comfort. In the second part is the concept of the heating system elaborated in three variants of the design in the scope of the study for the new family house. The third part is devoted to use of shell blocks of the BETONG with internal contact insulation compared to other masonry systems.
Advanced methods of application of thermal techniques in the design of heating buildings
Mikoláš, Petr ; Vyhlídalová, Karolína (referee) ; Horák, Petr (advisor)
The diploma thesis is divided into three parts. The first part is theoretical devoted to the introduction of BETONG building material. And next It is also devoted to themes of low - energy buildings and nearly zero-energy buildings, heat sharing and thermal comfort. In the second part is the concept of the heating system elaborated in three variants of the design in the scope of the study for the new family house. The third part is devoted to use of shell blocks of the BETONG with internal contact insulation compared to other masonry systems.
Contribution to the construction of cost and energy efficient family houses
Čech, Josef ; Mohelníková, Jitka (referee) ; Gašparik,, Jozef (referee) ; MBA, Pavel Slováček, (referee) ; Hrazdil, Václav (advisor)
Dissertation focuses on the verification of construction family houses made of concrete shell block with internal thermal insulation system. The construction technology is transferred to the Czech Republic from France. The work focuses on building envelope. The suitability of implementation is assessed on the basis of verification selected thermal technical requirements placed on building envelope. Requirements are specified by legislation in force in the ČR. The verification was performed by using software simulations and measurements on realized buildings. Critical areas of construction technology were identified on the basis software simulations and measurements on site. It was suggested solution, in which critical areas comply the thermal technical requirements. The building envelope was checked also using the thermography imaging on site. Continuous measurement of interior temperature was used to evaluate thermal comfort in the room. In the completed buildings was tested airtightness of the building envelope, which revealed other critical areas of the building envelope. Critical areas are necessary to solve with sufficient care. The economic cost of implementing each variants of exterior walls made of concrete shell block with internal thermal insulation were compared with the economic costs of implementing external walls made of burnt clay hollow blocks and made of burnt clay hollow blocks with external thermal insulation system ETICS. Subsequently, the economic return was calculated for individual variants of external walls made of concrete shell blocks with internal thermal insulation. From the environmental viewpoint was made comparison of production greenhouse gas CO2 and SO2 (cause acid rains) during the life cycle of the individual variations of exterior walls made of concrete shell blocks with system of internal thermal insulation, exterior walls made of burnt clay hollow blocks and burnt clay hollow blocks with external thermal insulation syst
Parish church, Brno - Líšeň
Jurák, Vítězslav ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
This diploma thesis, called „Parish church, Brno-Líšeň“, is compiled as documentation for building construction. There is one complex building situated in slope. Therefore it consists of one partly underground floor and first floor. It is divided into three sections. Central part is designed as round-shaped body of the church with tower in the southern part of the church. Shed roof has an angle of 7° for body and an angle of 13° for tower. From the western side there is an administrative area connected to the church and from eastern side there is a community area which is supposed to be used as residential premises. Roof of both these parts is constructed as flat vegetative roof. Structural design is systemic, Velox. Foundation construction combines concrete and ferro-concrete belts and footing.
The Designs for Transformation of Bata's Architecture in Letná District, Zlín
Vaňková, Lenka ; Bergmann, Ivan (referee) ; Zemánková, Helena (advisor)
The aim is to examine the possibility of increasing surface standard with varying intensity interventions and proposals for improvement of the technical condition of the building. Suggest three basic variants of reconstruction A, B, C according to the type, shape and position of the staircase. For a detailed elaboration select one variant - C2. Designing the two approaches to improve the technical condition of the building and internal microclimate - internal and external insulation. Both approaches are compared and evaluated their pros and cons.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.