|
|
Static analysis of joints in timber structures
Řehová, Jana ; Vlk, Zbyněk (referee) ; Zídek, Rostislav (advisor)
This bachelor thesis concentrates on the analysis of behaviour of carpentery joints in wooden constructions. Mainly it focues on sloped anchorage and hinges. The seams were analyzed classicaly by their statical influence and normative recommendations. The SCIA Engineer software was used for the analysis of the sloped anchorage.
|
|
|
Reverification of the roof structure of St. Catherine church in Kateřinky
Bayer, Petr ; Balázs, Ivan (referee) ; Pešek, Ondřej (advisor)
Church of St. Catarine is located in Opava-Kateřinky, Kostelní 119/1. Due to the extensive damage to the truss structure, a survey was conducted focusing on the geometry of individual elements and their harm (extent of cracks and incidence of woodworm and mold). On the basis of the data obtained, a control calculation of truss elements above the main part of the church was performed (ultimate limit state (ULS) and the serviceability limit state (SLS)). Most elements were found to be satisfactory. However, replacing the most damaged parts of the elements is necessary.
|
|
|
PPension - technological phase coarse upper construction
Řihák, Pavel ; Henek, Vladan (referee) ; Henková, Svatava (advisor)
The thesis is focused on construction srubového pension. It deals with issues of selected technological part of the project, which are: technical report biotic pests of wood, wood protection, technological process timber harvester, log walls, ceilings, roof, site facilities, the construction schedule, naazení machines, inspection and test plan, safety and health protection at work.
|
|
|
The structure of a family house
Vacatová, Eliška ; Buchta, Stanislav (referee) ; Šmak, Milan (advisor)
The goal of the bachelor thesis is the design of timber load-bearing structure of a family house. The building consists of two floors and loft. The first floor is masonry structure and is not part of this thesis. The second floor is timber frame house with gable roof. The dimensions of the house are 12,5x7,5m and height is approximatelly 11m. The building is located near Luhačovice in Zlín region and local weather conditions are considered for the analysis.
|
|
| |
|
|
The timber log cabin structure of the boarding house in Karlov
Špačková, Eva ; Straka, Bohumil (referee) ; Šmak, Milan (advisor)
The bachelor´s thesis deals with the design and the assessment of the wooden roof structure above the guest house in Karlov pod Pradědem, Jeseniky, at an altitude of 725 metres above sea level. The object has plan of the cross-shaped object about the approximate dimensions 13x20 m. On the first floor is brick. The second floor is made of wooden circular profiles – log cabin. The attic is habitable rooms, and I had to consider in the design of roofing. The roof structure is designed as a pair of intersecting each other pitched roofs. The emphasis is on the use of circular sections, to the roof of the extension on the bottom of the building, which is also from the circular profiles.
|
|
|
Durability of glued joints of structural timber elements
Mlčák, Tomáš ; Vejpustek, Zdeněk (referee) ; Vaněrek, Jan (advisor)
This bachelor thesis deals with the topics of durability of glued connections of structural wooden elements. The theoretical part of the work deals with the construction of wood, selected defects of wood, a description of carpentry joints and fasteners. The work also pays attention to adhesives and sealants used in glued joints of wooden structures or the issue of crack repair systems in wood. The practical part of the work is focused on experimental verification of the durability of used adhesives and sealants for glued carpentry elements.
|
|
|
Technological steps in the cabin superstructure Nenačovice
Petrásek, Jakub ; Mesiarkin, Jan (referee) ; Henková, Svatava (advisor)
The thesis is focused on construction of the cabin. Solves problems of selected parts of the technological project. Including: technical report, the technological process of log walls, ceiling and roof, building equipment, construction schedule, deployment of machines, quality control, health and safety.
|
|
|
Timber load bearing structure of a hotel building
Janči, Michal ; Šmak, Milan (referee) ; Straka, Bohumil (advisor)
The bachelor’s thesis deals with the design and assessment of the timber load bearing structure of a hotel building in Kouty nad Desnou, Jeseníky, at an altitude of 606 metres above sea level. The object has a rectangular shape with dimensions approximately 36x16m. The lower part of the structure is designed as a two-floor heavy frame and an attic. The columns are designed as swinging angles, and stiffening is solved by a set of bracings and struts. The roofing of the object is solved by purlin truss system with a triple vertical stool. The emphasis is placed on the use of commercially available timber beams. The sheathing of the structure will be solved by Fermacell gypsum boards.
|
|
|
New building log cabin object in Malenovice, rough superstructure
Jůnová, Lucie ; Mohapl, Martin (referee) ; Šlanhof, Jiří (advisor)
The bachelor’s thesis is focused on the construction of log house. Solves realization of rough superstructure. It is a single-storey building with an attic. The building is designed mostly from log construction and partly brick with wood-beamed ceilings, roofed a gable roof. The work includes technical report, technological regulation for vertical construction, ceiling and roof truss, design a construction site installations including construction organization, time schedule, design mechanical assembly, control and test plan, health and safety at work.
|
guest ::
