|
|
Design of replicated production of the selected part and verification of shape and dimensions using optical 3D scanning methods
Šrenk, Jakub ; Fiala, Zdeněk (referee) ; Slaný, Martin (advisor)
This work is engaged in the prototype casting of resin with usage of reverse engineering technology and rapid protopyping. Surface quality and dimensional accuracy was optimized in a production process. The technology of 3D scanning, rapid prototyping, soft tooling and finishing methods is discussed in the theoretical part. Then in the practical part there is analyzed manufacturing process of the selected component for replicated production. 3D scanning, additive technology, soft tools and surface finishing methods were used in the manufacturing process. In the last step, the dimensional accuracy is evaluated and also the technology for serial and piece production was chosen.
|
|
|
Optimisation of a die casting part production.
Vencálek, Jaroslav ; Janský, Milan (referee) ; Píška, Miroslav (advisor)
The project aim is an optimalization of production of pressure die casting, which serves as a one part of handle in office furniture area. The main emphasis was for mass finishing operation, which serves for rounding of very sharp part edges after die casting operation. A few tests of single mass finishing parameter was carried out and as result was a few partial recommendations for an increasing of production efficiency and improving of manufacturing process, namely an adjustment of separation cycle, proposal of optimum amount of pieces in each single batch and an innovation of chips type and dimensions. The project includes a proposal of a new and more efficiency layout of pieces on the transport pallet.
|
|
|
Methods of assessing the increase in the durability of concrete products with a painted surface with a subsequent cure
Minaříková, Kateřina ; Eger, Lukáš (referee) ; Hubáček, Adam (advisor)
This diploma thesis is focused on the description and summary of existing knowledge about vibro-pressed concrete products with treated surface with protective coating, that is hardering by ultravioled and infrared radiation. The theoretical part describes the production of vibro-presses products, possible wayt of finishing the surface including the description of the most commonly used materials and the methods of application and hardering of protrctive coating on the surface. Another point of the theoretical part is creating of lime efflorescence on the concrete surface and their subsequent disappearance. The experimental part of the thesis is ficused on obtaining information about the properties of the modified pavements by these techologies and comparing the acquired properties with the charakteristice of the reference pavements that do not have any protective coating on their surface.
|
|
|
Design of the finishing machine for rolling bearing's elements
Cagaš, Radek ; Křenek, Miloš (referee) ; Košťál, David (advisor)
The thesis deals with the design of the device that is used to improve the quality of the surface of spherical rollers. Spherical rollers are used for the measuring of the conditions in the EHD contact. The high roughness and waviness of the spherical rollers’ surface is a problem. Several machining methods are described in the theoretical part. The overview in theoretical part has been used for choice of the machining methods (lapping and abrasive polishing). The spherical rollers‘ machining system, its construction, electronics and control systems are described in the next section. The last part is focused on testing of assembled device, and on checking its functionality. The desired roughness of the spherical rollers' surface, suitable for successful interferometric measurement, was achieved by combining the selected machining methods. The roughness and waviness achieved was Ra0.01 micron Wa0.022 microns.
|
|
|
Surface finishing of plastic parts
Ševčík, Igor ; Škaroupka, David (referee) ; Paloušek, David (advisor)
The purpose of this bachelor’s thesis is processing of theme surface finishing of plastic parts, specifically products of 3D printing made of Acrylonitrile butadiene styrene (ABS), and consequent experimental execution of chosen methods. The thesis includes analysis of current knowledge, description of various procedures and possibilities of surface properties modification. The aim of treatment is to allow further processing of plastic objects, such as metal coating. Experiment accomplish-ments are listed and the effect of surface treatment is evaluated afterwards.
|
|
|
Using "reverse engineering" approach when making replica of Al casting by lost wax technology
Bezděk, Adam ; Cileček, Jarmil (referee) ; Horáček, Milan (advisor)
The aim of this thesis was to produce a prototype casting of aluminum alloy with usage of reverse engineering technology. In a production process surface quality and dimensional accuracy was optimized. 3D scanning, FDM technology, ABSplus surface finishing possibilities and investment casting technology is introduced in theoretical part of this thesis. Practical part of the thesis includes description of original parts, their 3D scanning, usage of RE and RP, production of new castings and evaluation of their dimensional accuracy and surface roughness.
|
|
|
Replacing of metal sheets with laminates
Ulrich, Josef ; Němec, Karel (referee) ; Molliková, Eva (advisor)
The aim of the bachelor´s thesis is composite material, specifically fiberglass. In the first part of this thesis fiberglass is described, their composition, chosen production technology and possibility of use. Mechanical properties and its advantages of fibreglass are compared with metal sheets. Fibreglass is described on example of particular component.
|
|
|
Assessing the impact of the closing of paint and lacquer surfaces on the durability of concrete products
Zubkova, Ekaterina ; Eger, Lukáš (referee) ; Hubáček, Adam (advisor)
This diploma thesis is focused on studying the influence of different types of surface treatments on vibropressed product. The main goal is to characterize surface treatments consisting of application of surface coatings that are hardened by infrared or ultraviolet radiation. Theoretical part gives specifications already known methods for surface finishing. Briefly describes selected types of prefabricated concrete parts and specificate the requirements for these products. It also describes used test methods. The experimental part was aimed at establishing the effectiveness of changing properties concrete products by adding coatings on their surface. This was achieved by testing the properties of concrete paving blocks with modified surfaces and testing of reference blocks that did not have any surface treatment followed by mutual comparison of the results.
|
|
|
Galvanizing of steel components
Turkovič, Matúš ; Hanusová, Petra (referee) ; Zelený, Martin (advisor)
This thesis deals with galvanic, i.e. electrochemical plating. It is concerned with chemical and physical principles that accompanying plating followed by general overview of metal coatings as well as describes the process of their application. In detail, it is focused on nickel coatings. Part of the work is focused also on practical deposition of such coatings on steel samples as well as on study of effects of plating conditions on prepared coatings.
|
|
|
Repair of car body
Tolkner, Josef ; Žák, Ladislav (referee) ; Kubíček, Jaroslav (advisor)
The work deals with the issue of repairing the car following a minor accident, or his body and especially her painting. Bachelor's thesis has been designed to help inexperienced drivers to fix their cars with minimal cost and to yourself. At first, I deal with the profitability of their own work-if not paid the car repair due to its condition and price compared with estimated costs of repair and time consuming work performed. I describe a variety of work such as removing damaged parts, metal straightening, filling inequalities, grinding, coating layers of paint and assembly. At the end make the final calculation of the cost of repairs, time allocation, the result of labor-cost estimate for repairing the vehicle and compare all the costs estimated at the beginning.
|
guest ::
