|
|
Electromagnetic levitation
Kondys, David ; Červinka, Dalibor (referee) ; Martiš, Jan (advisor)
The thesis deals with the issue of magnetic levitation. It is divided into two main chapters. The first chapter is focused on a general introduction to magnetic levitation. It describes the types of magnetic levitation, their use and the principle of execution. The end of the chapter is focused on a more detailed description of magnetically levitated MAGLEV trains. It describes the history of these trains, their use and construction. The second chapter is focused on the design of a device for demonstrating magnetic levitation. First, it deals with the simulation of an electromagnetic problem in the FEMM program. In addition, for the selected position configuration of the electromagnet and levitating magnet, it describes the design of the construction of the device in SOLIDWORKS and its manufacture. The result of the work is an attempt to make such a device that can stably keep the levitating magnet in the air.
|
|
| |
|
|
Evaluation of Smap3D software as a tool for design of evaporation system
Odstrčil, Marek ; Naď, Martin (referee) ; Vondra, Marek (advisor)
The main goal of the master thesis is an evaluation of a software package Smap 3D Plant Design in design of evaporation technology, specifically 3D of the pipeline network and its subsequent documentation. The thesis describes evaporation technology in general, then the evaporator testing site in Laboratory of Energy Intensive Processes in NETME Centre is presented, where pipeline network needs to be designed. In the next part a reference 3D model was created as well as a documentation using SolidWorks routing. Subsequently, an equivalent 3D model was created using Smap 3D Plant Design – Piping and a documentation was created using Smap 3D Plant Design – Isometric. Finally, these two methods of creating pipeline were compared to each other, and recommended method was chosen.
|
|
|
Fatigue evaluation methods for pressure equipment utilising numerical analysis results
Boleloucký, Václav ; Lošák, Pavel (referee) ; Létal, Tomáš (advisor)
Diplomová práce se zabývá hodnocením únavové životnosti v okolí konstručního uzlu tlakové nádoby, kde vzniká výrazná koncentrace napětí a je zde předpoklad primárního vlivu na únavu materiálu. Konkrétně se jedná o místo přechodu kontrolního otvoru do pláště analyzovaného zařízení. Práce obsahuje teoretickou a praktickou část. V teoretické části jsou představeny pojmy a metody hodnocení, související s danou problematikou. Na základě těchto metod je provedena analýza konstrukčního uzlu tlakové nádoby. Analýza je provedena metodou konečných prvků na skořepinovém a objemovém modelu nádoby v softwaru ANSYS Workbench, její výsledky dále zpracovány a vyhodnoceny dle aktuálního návrhu úpravy evropské harmonizované normy EN 13445--3, kapitoly 18. Výsledky analýz jsou hodnoceny v závěru práce.
|
|
|
Konstrukce lisovacího nástroje pro automobilový průmysl
Šťastný, Radek
The master thesis deal with sheet metal forming of material, designed for large-volume production in the automotive industry. On the basis of a processed literary study, a brief overview and description of sheet metal forming technologies, cutting, bending and drawing is performed. The computational and model part is included in the experimental part. Calculations are important for checking and selecting workpieces. Furthermore, there are calculated technical-economic parameters of the instruments after the commissioning stage. 3D models and drawings are created using SolidWorks 2017.
|
|
|
Design of injection mold production technology for precision casting
Fendrich, Tomáš ; Polzer, Aleš (referee) ; Zlámal, Tomáš (advisor)
The diploma thesis deals with the design and production of an aluminum injection mold for investment casting. The work briefly describes the technology of investment casting together with a description of the types of molds, their internal arrangement and the most commonly used materials. Another part of the work is devoted to the analysis of aluminum molds machining. Emphasis was placed mainly on those operations, that will be used in production of mold. The practical part describes in detail the process of designing the model and mold, as well as the process of designing production technology. The construction is performed using the program SolidWorks, production technology using the program SolidCam. At the end of the work, the mold is assembled and the functionality of the mold is verified by means of test injection and economic evaluation is made.
|
|
|
The Imaging Of A Schock Wave Within A Supersoniclow-Pressure Gas Flow Using Opticalmethods
Bayer, Robert
Using Environmental Scanning Electron Microscope (ESEM), which uses high gas pressure within the specimen chamber instead of vacuum, allows us to study samples containing water, samples with high capacity and live biological samples. It is because of the lack of the need to freeze the sample to sublimate the water from it. However, the behavior of the pumped gas in low pressures is not well mapped to be the low-pressure gas flow simulations considered adequately precise for applying on ESEM. To increase the precision of simulations, it is possible to use optical methods for imaging the shock wave within the differentially pumped chamber because of its uniqueness.
|
|
|
The Impact Of Critical Flow In Differentially Pumped Chamber
Hlavatá, Pavla
Environmentální rastrovací elektronový mikroskop (EREM), který je konstruován pro vysoký tlak plynů v komoře vzorku namísto vakua, umožňuje studovat vzorky obsahující vodu nebo živé biologické vzorky bez nutnosti jejich speciální úpravy. To z důvodu, že mezi komoru vzorku a tubus je vložena diferenciálně čerpaná komora. Vzhledem k velkým tlakovým spádům u této konstrukce dochází při čerpání plynu k nadzvukovému proudění za clonou oddělující komoru vzorku od diferenciálně čerpané komory. To se projevuje specifickým jevem kritického proudění ve cloně a poklesem tlaku v proudu v nadzvukové oblasti. Vhodnou konstrukční úpravou je možné využít daný jev a docílit snížení průměrného tlaku plynu ve dráze primárního svazku. To má za následek snížení rozptylu primárního svazku a zvýšení ostrosti výsledného obrazu.
|
|
|
Control system for drip irrigation
Zíka, Radim ; Benešl, Tomáš (referee) ; Bradáč, Zdeněk (advisor)
The bachelor thesis deals with designing drip irrigation control system. Aim of this thesis is realisation of microcontroler system which enables scheduled control of multiple branches of drip irrigation in an orchard. The design is focused on keeping the power consumption of the circuitry as low as possible. Theoretical part of this thesis focuses on research on drip irrigation and on low power circuit design theory. Practical part of thesis covers microcontroler system design, schematic design, printed circuit board design, revival of designed PCB and designing its control software.
|
|
|
Study of the possibility of using Tesla's turbine as a source of energy
Šedina, Martin ; Maxa, Jiří (referee) ; Kazda, Tomáš (advisor)
The master thesis deals with the currently used types of water turbines and next part of the thesis deals with the theory of Tesla turbine. The theoretical part discusses water wheels, water turbines with their types and models which are described in the work. The thesis also discusses the construction of the Tesla turbine, its possibilities of using, inside principles and information about Tesla´s patent. The practical part contains the design of the Tesla turbine with modifications for increasing efficiency. The thesis describes production and assembly of turbine and the technology used for production of the turbine. There is also described how the turbine was measured and there are results of measurements of the turbine.
|
guest ::
