|
|
Catalytic converter and particulate filter functions on diesel vehicles
Šišpera, Adam ; Beran, Martin (referee) ; Bazala, Jiří (advisor)
Tato bakalářská práce se zabývá představením dieselových emisně-redukčních systémů široké veřejnosti, odkrývá základní principy funkce dieselova motoru, mechanismy vzniku emisí a následně se věnuje jejich regulaci za pomocí katalytické redukce a filtru pevných částic. Odhaluje, proč je provozní teplota pro funkčnost těchto systémů klíčová a prezentuje možnosti, jak ji regulovat. V závěru pojednává o možnostech snížení uhlíkové stopy a vyhovění nadcházející emisní normě EURO VII.
|
|
|
Possibilities of elimination of residual ammonia content from technological water in power plants
Hajzler, Jan ; Bartoníčková, Eva (referee) ; Opravil, Tomáš (advisor)
This master thesis aims to study the possibilities of eliminating, or separation of ammonium shares from technological water of plants, where is introduced a secondary method of flue gas denitrification (SCR, SNCR). The need for elimination of ammonium shares arose after introduction of emission cap, which have been tightened since January 2015. The denitrification technologies were installed on devices that did not comply with the new limits. The theoretical part of the thesis deals with the description of combustion processes, as a fluid, and high temperature combustion of solid fuels, mechanisms of emissions and their reduction options. At the conclusion of the theoretical part is discussed the contents of the ammoniacal nitrogen in waters used in electricity and heating facilities to transport, or from which are separated by solid products of some processes such as desulphurization. There are also discussed some options for removal of ammonium salts from technological waters. Experimental part deals with finding appropriate method of determination of ammoniacal nitrogen, and the possibilities of its elimination by conversion to insoluble compound. Last but not least, the work deals with the evaluation of the sustainability of the proposed solutions. And as well as the real possibilities of their application in practice.
|
|
|
Reduction of nitrogen oxides from the flue gas stream on catalysts under non-standard conditions
Minář, Marek ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
The objective of the presented diploma thesis is reduction of nitrogen oxides from the flue gas stream on catalyst under non-standart conditions. Emphasis is places on the description of selected pollutants in flue gas (especially nitrogen oxides), legislative requirements for air protection and technologies for removal of nitrogen oxides, expecially methods of selective catalytic and non-catalytic reduction. The practical part is devoted to the reduction of nitrogen oxides by selective catalytic reduction on a pilot plant INTEQ II in the laboratory NETME Center. The subject of interest is the determination of the NOx reduction efficiency depend on the temperature for selected catalyst. The end of the practical part pursues with comparison of measurement results and their evaluation.
|
|
|
Optimization of Bosch DNOX 5.x Pump Module Testing Matrix
Friedl, Michal ; De Bernardi, Olivier (referee) ; Dundálek, Radim (advisor)
Táto diplomová práca sa zaoberá optimalizáciou validačných testov pre produkt firmy Robert Bosch určený na úpravu výfukových plynov vznetových motorov, tzv. Denoxtronic 5.x, konkrétne jeho najkomplikovanejšiu časť – Pump Module. Zhrnutím a analyzovaním porúch objavujúcich sa v reálnej prevádzke tak poskytuje spätnú väzbu pre oddelenie vývoja a navrhuje, akým mechanizmom by mali byť v budúcnosti validačné testy optimalizované.
|
|
|
NOx Reduction System
Karafa, Pavel ; Bradávka, Marek (referee) ; Svída, David (advisor)
This diploma thesis deals with the issue of nitrogen oxides emissions in exhaust gases and possibilities of their reduction. The task of the thesis was analysis of systems for NOX reduction by contemporary diesel engines, design and construction of NOX reduction device for given diesel engine, then verify functionality of this system compiled from commercially available components. In the last part of thesis available measurements will be made with an analysis of achieved results.
|
|
|
Technologies for NOx Cut-down in Exhaust Gases
Drábik, Michal ; Janoušek, Michal (referee) ; Dundálek, Radim (advisor)
This bachelor thesis deals with the issue of reducing nitrogen oxides emissions in exhaust gases and explains the principles of their reduction. The main aim of the thesis is to analyse and describe systems that are designed to reduce their amount. The following chapter provides examples of solutions for these systems for specific drive units. At the end of the thesis, there is a reflection on possible future development in this sphere.
|
|
|
Pohybová aktivita a přežvykování dojnic ve vztahu k jejich skupinové rutině životních projevů a vybraným fyziologickým funkcím
RŮŽKOVÁ, Michaela
This diploma thesis was focused on monitoring physical activity, rumination and changes in the routine behavior of dairy cows in relation to their health, milk yield and reproduction. Two herds of dairy cows in the company Zemědělské obchodní družstvo Mrákov, in the farms Tlumačov and Starý Klíčov, were selected to monitor the rumination and physical activity. The SCR Heatime ? PRO device was used to monitor these activities. Dairy cows were monitored from June 2019 to February 2020. The obtained data were processed in terms of mutual relations between individual indicators, taking into account changes in microclimatic conditions during the year.
|
|
|
Catalytic converter and particulate filter functions on diesel vehicles
Šišpera, Adam ; Beran, Martin (referee) ; Bazala, Jiří (advisor)
Tato bakalářská práce se zabývá představením dieselových emisně-redukčních systémů široké veřejnosti, odkrývá základní principy funkce dieselova motoru, mechanismy vzniku emisí a následně se věnuje jejich regulaci za pomocí katalytické redukce a filtru pevných částic. Odhaluje, proč je provozní teplota pro funkčnost těchto systémů klíčová a prezentuje možnosti, jak ji regulovat. V závěru pojednává o možnostech snížení uhlíkové stopy a vyhovění nadcházející emisní normě EURO VII.
|
|
|
Reduction of nitrogen oxides from the flue gas stream on catalysts under non-standard conditions
Minář, Marek ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
The objective of the presented diploma thesis is reduction of nitrogen oxides from the flue gas stream on catalyst under non-standart conditions. Emphasis is places on the description of selected pollutants in flue gas (especially nitrogen oxides), legislative requirements for air protection and technologies for removal of nitrogen oxides, expecially methods of selective catalytic and non-catalytic reduction. The practical part is devoted to the reduction of nitrogen oxides by selective catalytic reduction on a pilot plant INTEQ II in the laboratory NETME Center. The subject of interest is the determination of the NOx reduction efficiency depend on the temperature for selected catalyst. The end of the practical part pursues with comparison of measurement results and their evaluation.
|
|
|
Exhaust Gas Energy Recuperation in a Commercial Vehicle Diesel Engine
Šroba, Roman ; Janoušek, Michal (referee) ; Vondrák, Adam (advisor)
The scope of this thesis investigates value added by a turbocharger with an associated motor-generator unit to a diesel engine used by a commercial vehicle. A thermodynamic model of the engine was prepared in GT-SUITE software. Case studies were primary focused on a reduction of specific fuel consumption as well as a nitrogen oxides production using an energy recuperation of exhaust gas. Furthermore, there are described potential benefits of using an electric assistance in order to increase an exhaust gas temperature during a steady state engine operation. Additionally, there is an investigation of potential benefits of a turbocharger assistance in a transition engine mode operating during rapid acceleration of the vehicle. The results of individual analysis will be taken into account for a selection of turbocharger regarding specific engine implementation. The results of simulation suggest that it is possible to lower specific fuel consumption, production of nitrogen oxides, as well as accelerate turbocharger response.
|
guest ::
