|
|
Family house
Trtílek, Petr ; Uheríková, Eliška (referee) ; Brukner, Bohuslav (advisor)
This bachelor thesis presents a design of a a family house for 4 -5 member family. The house is situated in Lány near Prague. The house is designed as a two-storey house with a partly flat roof and partly classical roof. Both inside and outside the house, the design respects different levels of the ground around. The house is divided into a living area and garage. The ground floor is intended as a daytime area and it is suitable for family activities. The first floor with bedrooms is intended as a place to sleep and relax. The entrance into the family house is designed on the ground floor. The house is built on a concrete base platform supported by foundation structure. The ground floor and the first floor are made of ceramic blocks. Exterior walls are insulated with Rockwool mineral wool panels. The roof is designed from prefabricated extensive green roof trays. Analysis of thermal and mechanical properties of the house and fire safety report on the building solution is also a part of this bachelor thesis.
|
|
|
Roof structure of construction for social purposes
Bašista, Ján ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The work treats the static recalculation of an existing roof structure of a construction for social purposes and proposes two variants of the design of a new roof structure. The construction has a rectangular ground plan of 30 m x 47 m and the roof structure is placed on the load bearing circumference concrete walls. Except for the load constituted by the function of the construction and by the climatic area, an extra load of 2 tons suspended at any place of the structure is considered because of the special requirement of working and technological equipment. The variant no. 1 is designed from the steel S355. The variant no. 2 is designed as a combination of the wood GL24h and the aluminium EN-AW 5083. Both of the variants have 11 transverse load bearing girders. The purlins are perpendicular to the girders and are placed on them. Stiffness is secured by roof stiffeners.
|
|
|
The roof structure of the industrial hall in Kyjov
Nosková, Nela ; Pilgr, Milan (referee) ; Šmak, Milan (advisor)
The Bachelor´s thesis describes design and static assessment of the main roof structure supporting elements of the roof structure of the industrial hall in Kyjov. The hall is designed from timber. The aisle is rectangular floor plan 17,0 x 40,0 m. The main bearing structure causes as a frame truss supported by columns. Solid frame is made from solid timber C24. Purlin is designed from solid timber C24. The static calculation also includes fire resistance reports of single elements. Static analysis has been accomplished by student version of the SCIA Engineer 2012 software.
|
|
|
Family house
Leupold, Karel ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
Bachelor´s thesis solve design of the Family house in city Telč. It is a two-storey house with a partial basement, the roof is pitched with a slope of 35°. The house is designed of brick POROTHERM. The building is set on a land slightly sloping. The object is designed by valid standard.
|
|
|
Lumber mill
Beran, Miroslav ; Šmak, Milan (referee) ; Barnat, Jan (advisor)
The aim of The Bachelor’s thesis is design and assessment of steel structure lumber mill. The building has rectangular shape with dimensions of 24 x 9 m, highest point is 5 m. The main supporting structure consist of three-hinged truss girder in axial distance of 4 m. The individual frames are connected by purlins and girts and spatial rigidity of the structure provides system of longitudinal and sway bracings. The entire building is assessed as a closed hall, a hall with open barndoor on one gable wall and as roof with only longitudinal wall for continuous working.
|
|
|
Office building of brewery in Černá Hora, technological solution of roofing stage.
Nevole, Jan ; Rychtecký, Martin (referee) ; Kovářová, Barbora (advisor)
The aim of this bachelor thesis is to design a roof construction for a building used as an administrative centre at the Černá hora brewery. The attachments provide a solution in forms of a wooden roof frame and a flat roof constructed from tie beams. The thesis contains the technological procedures for constructing both variants of roofing, principles according to which is the construction organised, safety and health measures taken on the construction site, design of the mechanical assembly, time plan, controlling and testing plans for both variants and construction details.
|
|
|
Rekreation center
Hugyecová, Aneta ; Pailová, Alena (referee) ; Maceková, Věra (advisor)
Diploma work is dealing with new building rekreation center for family recreation and catering. The object takes place on a flatland terrain. It is solved like a duplex, without basement and with a terrace on the second floor. The basics is made of concrete C16/20. The vertical support system is designed from blocks POROTHERM 44 Profi and 30 Profi, partitions from blocks POROTHERM 14 Profi and 8 Profi. The ceiling construction will be mounted from concrete ceiling panels SPIROLL. The object will be covered by flat roof.
|
|
|
Antenna for telecommunications equipment on a building in Brno
Alánová, Anna ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
The subject of this thesis is the design of antenna mast variants on an existing building in Brno. Firstly, a professional inspection was carried out at the primary school to measure the roof and evaluate the overall condition of the structure. From the measured data, a model of the entire roof was developed in Autodesk Inventor and documentation of the actual condition was prepared. Based on this documentation, the design of the steel antenna mast was developed in two variants - a tubular mast and a truss mast composed of circular bars. The anchoring of the entire structure with the antenna mast is by threading into the bearing walls and further fixing into the rafters and collar tie. Both variants were modelled in AxisVM, the design of the connections of the tubular mast was carried out in IDEA StatiCa, the design of the connections of the truss mast was determined by manual calculation. Both of these variants were modelled in Autodesk Inventor and the drawing documentation, and an accurate statement of materials were produced from this. The roof was scaled down to the central section only for structural design purposes. The roof was first assessed in AxisVM separately and then with the effects of the structure loads from the antenna technology including the proposed roof strengthening. The assessment of the carpentry joints was determined by manual calculation.
|
|
|
Detached house, Bystrice pod Hostynem
Šindelková, Petra ; Kalábová, Tereza (referee) ; Bečkovský, David (advisor)
This bachelor’s thesis deals with a design of a detached house in a particular area in the village Bystrice pod Hostynem. The aim is to create dispositionally logically linked com-plex that will suit the requirements of a modern four or five-member family and will fit into the current development with its own look. The house is designed as a two storey, no basement and with a gabled roof. The garage for one car is structurally and functionally joined with a living area. Peripheral walls are from the SENDWIX system, which is made up of the sand-lime bricks warmed with mineral insulation of rock wool. The orientation of this house to the cardinal points is chosen according to the requirements of sunlight and the thermal comfort of separate rooms. On the south side of the house is a spacious garden which is accessible through the terrace from the living room.
|
|
|
Family House
Havlíček, Jiří ; Komínková, Kateřina (referee) ; Lavický, Miloš (advisor)
The bachelor project Family house is compiled in a from of project documentation which comprises all the requisites required by current regulations. The designed house is placed on the sites numbered 199/81 in Sezimovo Ústí
|
guest ::
