|
Energy - saving family house in Hostinné
Laba, Libor ; Vaščáková, Alena (referee) ; Doležalová, Jana (advisor)
The aim of the bachelor’s project is to design a low-energy detached house. First part of project is focused on the structural and architectural design, building physics and fire safety of building. The plot is situated in the west of Hostinné and terrain is almost flat. The building is designed as two-storey detached house with flat green roof above first floor and flat blue roof above second floor and garage with green roof next to the house. The building is designed on concrete strip foundations and the load-bearing walls and ceilings of the building are designed of cross-laminated timber. The entrance to the plot and also to the house is in the north. On the first floor there is living room, kitchen, bathroom, WC, utility room, home office and pantry. On the second floor there are two bedrooms, master bedroom and bathroom. Second part of project is focused on the energy performance certificate, detailed design of sanitary installations and concepts of building services such as heating and ventilation. The designed house was classified as A in EPC. The rainwater will be partly retained in the green roofs and the rest will be accumulated in stormwater tank and further used for garden irrigation. Excess water will be infiltrated into the ground on the property. The house will be heated by a pellet boiler and heat distribution will be ensured through underfloor heating and radiators. The building is designed with a ventilation unit with heat recovery and photovoltaic panels.
|
|
Kindergarten in Horní Heršpice
Gryčová, Jana ; Jelínková, Barbora (referee) ; Ostrý, Milan (advisor)
The master´s thesis deals with the project documentation of the kindergarten in Horní Heršpice. The structure is designed as a detached building with one floor. The ground plan is in the shape of the letter „U“. The kindergarten has two compartments, each of which is intended for 20 children. There is also a kitchen and technical facilities in the building. Solid wood panels (type CLT) from the Novatop company were selected as the structural system. The building is based on foam glass, on which there is a reinforced concrete slab. One part of the building is topped by a flat „green roof“, and the second part with a slanted roof. Access to the building is from the north, where the parking is also situated.
|
|
Retirement home in Zlatovce
Tomov, Róbert ; Jelínková, Barbora (referee) ; Ostrý, Milan (advisor)
The topic of this thesis is a project documentation of a Retirement home located in Trencin part Staré zlatovce. The object had been designed as a stand-alone four storey building. The floor plan is in the shape of an "F". The Retirement home has a public part, designed for people from nearby area: There is a chapel, a Physician and flats for rent, restaurants and free-time activities. The food prepared in the objects is fairly simple. The main lunch courses are being delivered from a different provider and are only re-heated in the kitchen. A reinforced concrete monolitic skeleton has been used as a contrtuction system for the bulding with square-pillars and infill material is designed from massive wooden construction Novatop solid. The object itself is standing on reinforced concrete footings. The elevator shaft bottom will be made of water ressistant concrete. The building envelope threshold will consist of reinforced concrete as well. One part of the object, above the 3rd floor, is green-roofed, and the roofing above the 4th floor is warm flat roof. The same is designed above the 1st floor chapel - a warm flat roof with rectification pedestals and concrete paving so that the roof can be used as a terrace. Photovoltaic and phototermic collectors are placed on the roofing above the 4th floor. The driveway of the whole object is placed on the western side, just as a parkplace for employees. The parkplace for tennants and visitors is placed on the eastern side.
|
|
Detached house, Debolin
Plachý, Tomáš ; Bečkovská, Tereza (referee) ; Bečkovský, David (advisor)
The Bachelor thesis topic is a project of a detached house. The house is designed as two storey basementless wooden building with a pitched roof. The 5 bedrooms layout fulfills the design for 4-5 family members. The entrance is situated in the northwest part of the house. From which we get into the hall of which is open to the kitchen and living room, staircase room, utility room, WC and garage for one car, followed by the workroom. On the second floor there are two children's bedrooms, bathroom, WC and livingroom. All of the bedrooms are enterable form the hall and have southern view. It is a wooden building of large-size panels NOVATOP. The roof is supported by NOVATOP.
|
|
House of Beauty Salon
Ficza, Silvia ; Šafářová, Markéta (referee) ; Lavický, Miloš (advisor)
The bachelor thesis deals with the design of a family house with a beauty salon. The object is a detached two-storey building with a flat roof and a basement and it gives home to five people. The garage and the parking lot for the clients of the salon are also part of the object. The main entrance into the building is situated to the west and the separate entrance for the clients of the salon to the north. The construction system of the house consists of solid wooden CLT (cross laminated timbre) based panels from the Novatop company. The structure is based on foam glass, as by its´ use there is no need for further isolation of the building from the base plate, which is made of steel reinforced concrete. Thanks to good land selection, there were no problems with underground water or possible damage to neighbouring buildings.
|
|
Guesthouse Repechy - renewal and extension of farmhouse
Mokrý, Stanislav ; Janok, Jakub (referee) ; Sátora, Josef (advisor) ; Matějka, Libor (advisor)
The subject of this bachelor thesis is the reconstruction of a neglected farm in a small village Repechy at Drahany Highlands. The original layout was traditional square with an inner courtyard. Later the building was completely rebuilt inappropriately (demolition of interior walls, roofing over the courtyard) and used for breeding cattle. The investor intend to reconstruct and extend the building so it can be used as a guesthouse providing additional features – a restaurant, a gym and an indoor pool with whirlpool, which are accessible to accommodated and external visitors. Estimated capacity is approximately 50 beds and the same number of seats in the restaurant. Due to the poor state of the majority of structures, only a small part of the original building is preserved, namely the northeast wing which was originally used as a residential area. The original walls and beamed ceilings are complemented by a new reinforced concrete shear ring and a new ceiling slab (for comparison height levels of floors in the 2nd floor and probably insufficient bearing capacity of the original ceiling). New parts of the building are built using the NOVATOP construction system of prefabricated panels made of solid wood. Under this system are resolved both outer and interior walls, ceilings and roof. Roof covering is made of fibre-cement roof tiles. Insulation is made mostly of wood-fibre boards by STEICO. The design of exterior of the building is using two colors - pure white plaster uniting old and new parts and platinum gray highlighting selected elements (cornices, window and door jambs).
|
|
Wooden House
Munzar, Daniel ; Dohnal, Jakub (referee) ; Lavický, Miloš (advisor)
The subject of my bachelor thesis is design of wooden family house. Building is designed as a single family house for family of four. The building is set into the sloping terrain and consists of two floors. One floor is partially under the terrain and is designed with the permanent shuttering DEK and with the Porotherm brick blocks. Ceiling above this floor is designed with the Porotherm ceiling system. Second floor is designed as a wooden house with the Novatop system. Ceiling above this floor is designed with the Novatop system. Vertical bearing structures are designed with contact insulation system. Roofis designed as a hipped roof with wooden truss girders. The drawings were processed in a computer program ArchiCad.
|
|
Detached House
Ježek, Martin ; Osička, Jan (referee) ; Lavický, Miloš (advisor)
The bachelor thesis solves the proposal of a two-family house on the basis of wood in Strážnice. The work contains complete documentation for construction, assessment of acoustics, lighting and fire safety of buildings. The house is divided into two living units. The first single-storey apartment unit is designed for a two-member family with layout 3 + KK. The second two-storey apartment unit is designed for a four-member family with layout 5 + KK. The apartment units are independent, each with its own main entrance and two parking spaces. The house is designed as a wooden structure, where the vertical structures form the supporting panels, which together with the horizontal track elements form one unit. Fundamentals are solved in the form of base passages based on non-fading depth. Roofs over both units are single, warm flat roof.
|
|
Návrh dřevostavby rodinného domu
Müller, Lukáš
In this bachelor thesis I present a one-storey family house planned on NOVATOP system. First part of thesis is a background research in wooden houses field. There is also precisely detailed design system from NOVATOP, based on massive panels fully described to give a full understanding of its quality and technical abilities. It gives a view on constructions composition, design details and thermal management of circumferential walls. Second part is composed of technical drawing of house, which has been made to fit building permission laws and gives full specification ready to be placed in administration processes.
|
|
Dřevostavba rodinného domu v obci Nivnice
Májek, Pavel
The bachelor thesis is focused on the elaboration of technical documentation for the creation of a massive wooden house of a family house character in the village of Nivnice, while respecting the local construction conditions given by the territorial plan and in accordance with the requirements of the valid norm and legislative environment in the Czech Republic. The designs of the layout and the spatial solution of the house are made in five variants, depending not only on the shape of the built-up area, but also on the house type (terraced house, detached house or semi-detached house) and the size of the land. These individual types of objects are then placed in the selected site according to the current surrounding build-up area. For the selected alternative - a two-family house and a specific plot, drawing documentation, including technical description and the setting of the approximate price of construction, is created. Part of the text is a calculation of the coefficients of heat transfer through the buildings cover construction.Formula clause:Prohlašuji, že jsem práci: Dřevostavba rodinného domu v obci Nivnice vypracoval samostatně a veškeré použité prameny a informace uvádím v seznamu použité literatury. Souhlasím, aby moje práce byla zveřejněna v souladu s § 47b zákona č. 111/1998 Sb., o vysokých školách a o změně a doplnění dalších zákonů (zákon o vysokých školách), ve znění pozdějších předpisů, a v souladu s platnou Směrnicí o zveřejňování vysokoškolských závěrečných prací. Jsem si vědom/a, že se na moji práci vztahuje zákon č. 121/2000 Sb., autorský zákon, a že Mendelova univerzita v Brně má právo na uzavření licenční smlouvy a užití této práce jako školního díla podle § 60 odst. 1 autorského zákona. Dále se zavazuji, že před sepsáním licenční smlouvy o využití díla jinou osobou (subjektem) si vyžádám písemné stanovisko univerzity, že předmětná licenční smlouva není v rozporu s oprávněnými zájmy univerzity, a zavazuji se uhradit případný příspěvek na úhradu nákladů spojených se vznikem díla, a to až do jejich skutečné výše.
|