|
|
Fire station
Kaňa, Josef ; Kacálková, Lenka (referee) ; Kacálek, Petr (advisor)
The diploma thesis named Fire Station deals with project documentation at the level of construction execution documentation for a fire station. The building is located on the outskirts of Holešov in the part called Všetuly. The building is located in close proximity to the existing production plants, the local industrial zone, which is accessible from outside the city and close to the approach to the under-construction D49 and part of the city bypass. The project deals with the location of the building on the land, including paved areas and their connection to existing roads, the project also includes the location of sports fields for physical training. The building is designed as a two-story building with five parking spaces for emergency vehicles, where this space extends over both floors. On the 1st floor, the technical facilities of the station with storage and a dirty changing room are designed. On the 2nd floor, emergency rooms and offices of serving firefighters with hygienic facilities are designed. The station is designed according to the Fire Protection Act size P2 for a JPO I category unit with 24 serving firefighters in three shifts. As part of the proposal, vehicles at the existing unit were considered AZ – 30 M1Z Novus, CAS 3 – T815, CAS 20 – S2Z MB, KHA, TA – MAN, Škoda Kamiq.
|
|
|
Realization of the rough construction of a polyfunctional building, Moravský Svätý Ján
Hladíková, Simona ; Nečasová, Barbora (referee) ; Novotný, Michal (advisor)
The aim of this bachelor thesis is to solve the stage of the upper rough construction of a multifunctional house in Moravský Svätý Ján, which is a monolithic skeleton. This skeleton is made up of columns, beams and a cross-reinforced ceiling slab. The object's construction system is bi-directional. The staircase is made up of prefabricated elements and its supporting structure consists of brickwork made of grounded Heluz bricks. The building is non-blocked and has three above-ground floors, but the monolithic skeleton forms only the first and second floors. The third floor consists of a cladding made of grounded Heluz masonry, which forms the supporting structure of the roof made of sculpted wood joinery. The project was provided by Ing. Hušek Miloš. The project was adapted to enter a replacement land in Moravský Svätý Ján, otherwise the building is located in the Moste near Bratislava.
|
|
|
Centre of Leisure Time Brno
Gallo, Robert ; Teplý, Vladimír (referee) ; Odvárka, Antonín (advisor) ; Štěpánek, Ladislav (advisor)
The Leisure Centre in Brno - part Kraví hora represents the object of variable disposition providing a multi-purpose use. The aim was to design the house where nobody can get lost, the user-friendly house with the plain meaning as far as interior concerns, but attractive from the outside, which was accomplished with the COR-TEN façade. The object of the building creates exterior entrance atrium which is utilizable by various forms. It is placed into a brand-new park, where it dominates the space and at the same time with its façade fits into the natural environment. The building is ´cut´ by hygienic core in the concrete finish. The disposition is thus divided into two brightened atriums surrounded by the space designed primarily for exhibitions, dance, singing, playing the musical instruments, dramatic art and drawing.
|
|
|
Selected Parts of the Construction Technology Project of the Sports and Relaxation Centre Brno-Bohunice
Antal, Martin ; Porwisz, Ondřej (referee) ; Mohapl, Martin (advisor)
The subject of this diploma thesis is the processing of selected parts of the construction-technological project of the sports and relaxation centre in Brno. This thesis deals with the processing of the technical report to the construction and technological project, the coordination situation of the construction with broader relations of transport routes, the time and financial plan of the construction - object, the study of the implementation of the main technological stages of the construction object, the project of the construction site equipment - drawing documentation, the time plan for the construction of the disposal of the objects of the ZS, the economic evaluation of the costs of the ZS, the design of the main construction machines and mechanisms - sizing, placement, transport to the construction site, assembly, reaches, time deployment, source and consumption of energy, safety measures, time plan of the main construction object - technological standard and time schedule, plan of securing material resources for SO 01- Rough construction and building envelope, technological regulation for the execution of reinforced concrete monolithic skeleton, quality control and testing plan for reinforced concrete monolithic skeleton (detailed description of operations and performed controls), OHS plan - selected technological processes, specialization in the field: Storm water management.
|
|
|
Halls of residence
Matějů, Šimon ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
THIS DIPLOMA WORK IS PROJECTING A PROJECT DOCUMENTATION FOR THE CONSTRUCTION OF STUDENT DORMITORY IN BRNO. THE BUILDING IS SITUATED AT THE TECHNOLOGY PARK NEAR TO SEVERAL VUT FACULTY AND STUDENT CAMPUS. THE DESIGN CAME FROM THE LONG-TERM LACK OF ACCOMMODATION CAPACITY ON EXISTING DORMITORY IN BRNO, THE EMPHASIS WAS PUT MAINLY ON THE ACCOMMODATION CAPACITY OF THE BUILDING. THE BUILDING CONSISTS OF TWO FOUR-STOREY BLOCKS WITH A TOTAL CAPACITY OF 244 BEDS, WHICH ARE SITED ON THE 2ND TO 4TH FLOORS. A TYPICAL AND REVERSE ELEMENT IS A LIVING CELL IN WHICH CONTAINS TWO DOUBLE ROOMS - A COMMON SCHEDULE WITH DINING ROOM, A COMMON SOCIAL BACKGROUND WITH A HALL, AND TWO BALCONIES ACCESSIBLE FROM THE KITCHEN. 1. THE FLOOR FLOOR CONNECTS BOTH BLOCKS WITH A LARGE STUDY AND CORRIDOR. THE REMAINING ROOMS IN THE 1ST FLOOR ARE USED AS A TECHNICAL AND ADMINISTRATIVE FACILITY OF THE DUTY.
|
|
|
Polyfunctional house
Kuklová, Jana ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The main aim of the thesis is to design a new building of the mixed-use building in Brno. The building consists of two parts. One part consists of shops. The second part consists of offices and conference space. It is a building that has three floors above ground and one underground. In the basement there are a facilities and a garage. Shops are designed on the ground floor. There are offices on the second floor. Conference rooms are on the third floor. The building has a flat roof. The vertical load-bearing structures are designed from Porotherm ceramic blocks. In the core of the building, the vertical load bearing structures are designed as monolithic reinforced concrete walls. Columns are used in the building for the possibility of open space. The masonry of the basement consists of white bathtub. The floors are designed as folded from the Spiroll system. Internal non-load-bearing walls are designed from gypsum board with double cladding. The second part of the work deals with forced ventilation, cooling and central heating. In the third part of the project I deal with acoustics. The project was carried out in the Auotocad program. All constructions comply with valid standards and regulations.
|
|
|
Office building
Janková, Denisa Anna ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
This master thesis elaborates the project documentation for the construction of an office building in Krnov city, located in the Moravian-Silesian region. The office building has four utility above-ground floors and one underground floors serving as underground garages. There is a cafe, stationery, showrooms and office space with sanitary facilities. The construction system is designed as a monolithic reinforced concrete skeleton. Vertical infill constructions are made of brick technology from Porotherm ceramic blocks. The ceiling structures are made of filigree panels with hidden steel girders, which are embedded with concrete layer. The basement and the basic structure of the house is designed as a white tub. The building is covered with vegetation roof. The design emphasized increased comfort in use and the overall modern concept of an office building. Overall, the building is designed to the required values for a near zero energy building.
|
|
|
Sport Centre Královo Pole
Kouřilová, Monika ; Teplý, Vladimír (referee) ; Odvárka, Antonín (advisor) ; Pěnčík, Jan (advisor)
Design of building is one solitaire two-floors object. The main purpose of design was effort to conect all required functions. The shape of the building is derived from the shape of the rink. The total mass consists of two rounded raising shapes which are indented. The first shape represents the inner side of the rink which starts with an access ramp and ends with the final terrace at a café. The second shape copies the first one with the fact that it is increased for one floor from the very beginning of rising. The building is situated in the northwest side, which is the most visible side from the access communication. The entire building is covered in perforated sheet coat. Moreover, the coat graphically illustrates stylized crystals of water - ice. This page therefore demonstrates the secret of the shape, height and colour of the object.
|
|
|
Multifunctional object Brno - Bohunice
Chládek, Jakub ; Novotný, Miloslav (referee) ; Novotný, Miloslav (advisor)
The subject of the diploma thesis is the design of a multifunctional building in Brno Bohunice. The building has six floors with five floors above ground and a basement. The first above-ground floor will be used for commercial units, the second to fifth floors will be used for administration. The basement contains a collective garage. Structurally, the building is designed as a monolithic reinforced concrete skeleton in a 6 x 6 meter module and is based on a base plate locally supported by gravel piles under columns. The roof is designed as a flat single shelled.
|
|
|
Polyfunctional Building VEKTOR in Pardubice, Preparation for Building Realization
Vančura, Jaroslav ; Patloka, Jiří (referee) ; Šlanhof, Jiří (advisor)
The subject of the diploma thesis is construction technology project of polyfunctional building VEKTOR in Pardubice. Building object has seven overground floors and has not basement. The construction system of the building is a monolithic skeleton consisting of columns and a ceiling slab. Part of the thesis includes technical reports, construction technology study, situation with wider transport route relationships, the project of the construcion zone equipment, suggestion of machines and mechanisms, plan for securing material resources, technological regulation for monolithic constructions, control and test plan for monolithic constructions, item budget, time schedule, chronological and financial plan of the building – object.
|
guest ::
