|
|
Sinumerik 840D control system for programming of blanks for gear manufacturing
Havlát, Pavel ; Sliwková, Petra (referee) ; Polzer, Aleš (advisor)
The master thesis deals with the use of the Sinumerik 840D control system for programming of blanks for gear manufacturing. The first part of the thesis is focused on analysis of machinability of the material followed by experimental testing of machinability of material 16MnCr5. An experimental evaluation of the effect of cutting parameters was carried out to force load of semi roughing cutting tool CoroTurn 300. In the next part of the thesis there is a technical documentation of gearing parts, for which a NC program is created. Finally, the possibilities of using the Sinumerik 840D control system are listed and demonstrated by workshop-oriented programming of the considered components for the SP 280 SY turning center.
|
|
|
Cutting force analysis when 5-axis milling
Dvořáček, Jan ; Kalivoda, Milan (referee) ; Polzer, Aleš (advisor)
The diploma thesis is focused on machining using the ball-end shank mill. Content of the preliminary part of the work is a shank mill characteristic and a consequent part shows a splitting of ball-end milling cutters, its application, the cutting tool geometry and a characteristic signs of machining. The cutting force model of the ball-end mill is presented as well. A part of proposed model is the conversion of the resultant force too. Practical part is aimed at cutting force analysis of the ball-end mill and the main purpose of this part is a quantification of the cutting force for different work piece tilt angles while milling is performed.
|
|
|
Force loading of milling tools during the machining process
Procházka, Luděk ; Slaný, Martin (referee) ; Polzer, Aleš (advisor)
The thesis deals with the problem of force loading during machining of thin-walled parts. In the theoretical part, the force load applied during milling and the possibility of measuring of the force loading during milling is analyzed. Further the work focuses on the machining of thin-walled parts, problems in machining of these parts and the possibility of eliminating these issues. The practical part deals with the design and realization of the measurement of the force load on the selected components. The thesis also presents a comparison of the simulation model of deflection of thin-walled parts with the values measured in real machining.
|
|
|
A study of cutting forces during the turning process and their measurement
Piroš, Viktor ; Trčka, Tomáš (referee) ; Polzer, Aleš (advisor)
This bachelor’s thesis is structured as a literature search. Its target is to show a complex look at the problematics of force load in turning process. In the beginning, the thesis is focused on brief characteristics of turning process and tool geometry as a one of the main aspects influencing the force load in the machining system. Furthermore, the thesis deals with problematics of force load creation and its dependence on basic cutting parameters. Second part of the thesis is dedicated to the options of force load measurement in turning process and works out an illustrative example of numerical evaluationof measured data with basic statistical indicators in detail.
|
|
|
Force loading of cutting tools during the machining process
Vančura, Tomáš ; Trčka, Tomáš (referee) ; Polzer, Aleš (advisor)
The theoretical part of the diploma thesis summarizes a knowledge of the force loading of the cutting tools and state of the art in the cutting force measurement. In the experimental part, work deals with the development of the software for a force records analysis. The main objective of the software is to automatise the processing and analysis of the measured force records. The functionality of the newly created software was verified by evaluating the circle-segment end mills experiments performed at the Institute of Manufacturing Technology of the Faculty of Mechanical Engineering, BUT.
|
|
|
A study of cutting forces during the turning process and their measurement
Piroš, Viktor ; Trčka, Tomáš (referee) ; Polzer, Aleš (advisor)
This bachelor’s thesis is structured as a literature search. Its target is to show a complex look at the problematics of force load in turning process. In the beginning, the thesis is focused on brief characteristics of turning process and tool geometry as a one of the main aspects influencing the force load in the machining system. Furthermore, the thesis deals with problematics of force load creation and its dependence on basic cutting parameters. Second part of the thesis is dedicated to the options of force load measurement in turning process and works out an illustrative example of numerical evaluationof measured data with basic statistical indicators in detail.
|
|
|
Force loading of cutting tools during the machining process
Vančura, Tomáš ; Trčka, Tomáš (referee) ; Polzer, Aleš (advisor)
The theoretical part of the diploma thesis summarizes a knowledge of the force loading of the cutting tools and state of the art in the cutting force measurement. In the experimental part, work deals with the development of the software for a force records analysis. The main objective of the software is to automatise the processing and analysis of the measured force records. The functionality of the newly created software was verified by evaluating the circle-segment end mills experiments performed at the Institute of Manufacturing Technology of the Faculty of Mechanical Engineering, BUT.
|
|
|
Force loading of milling tools during the machining process
Procházka, Luděk ; Slaný, Martin (referee) ; Polzer, Aleš (advisor)
The thesis deals with the problem of force loading during machining of thin-walled parts. In the theoretical part, the force load applied during milling and the possibility of measuring of the force loading during milling is analyzed. Further the work focuses on the machining of thin-walled parts, problems in machining of these parts and the possibility of eliminating these issues. The practical part deals with the design and realization of the measurement of the force load on the selected components. The thesis also presents a comparison of the simulation model of deflection of thin-walled parts with the values measured in real machining.
|
|
|
Sinumerik 840D control system for programming of blanks for gear manufacturing
Havlát, Pavel ; Sliwková, Petra (referee) ; Polzer, Aleš (advisor)
The master thesis deals with the use of the Sinumerik 840D control system for programming of blanks for gear manufacturing. The first part of the thesis is focused on analysis of machinability of the material followed by experimental testing of machinability of material 16MnCr5. An experimental evaluation of the effect of cutting parameters was carried out to force load of semi roughing cutting tool CoroTurn 300. In the next part of the thesis there is a technical documentation of gearing parts, for which a NC program is created. Finally, the possibilities of using the Sinumerik 840D control system are listed and demonstrated by workshop-oriented programming of the considered components for the SP 280 SY turning center.
|
|
|
Cutting force analysis when 5-axis milling
Dvořáček, Jan ; Kalivoda, Milan (referee) ; Polzer, Aleš (advisor)
The diploma thesis is focused on machining using the ball-end shank mill. Content of the preliminary part of the work is a shank mill characteristic and a consequent part shows a splitting of ball-end milling cutters, its application, the cutting tool geometry and a characteristic signs of machining. The cutting force model of the ball-end mill is presented as well. A part of proposed model is the conversion of the resultant force too. Practical part is aimed at cutting force analysis of the ball-end mill and the main purpose of this part is a quantification of the cutting force for different work piece tilt angles while milling is performed.
|
guest ::
