|
|
Laser diodes controller utilizing AVR microcontroller
Boštík, Jiří ; Šilhavý, Pavel (referee) ; Krajsa, Ondřej (advisor)
This thesis deals with the design and subsequent realization of laser diode control devices. The circuit will be able to control the diode with using a laser driver, via a computer network or via the display for control current values, setting of initial values and more. The device will be connected also with a SD card for saving of settings. In the theoretical part there are described individual components that are needed for functionality of the device. The practical part contains a block diagram, in which is described complete feature of the device, then a draft scheme with a description of all integrated circuits and important components. At the end of this work is described the software that controls the entire designed device.
|
|
|
Measurement of the optical intensity distribution at the far field
Vitásek, Jan ; Němeček, Jiří (referee) ; Wilfert, Otakar (advisor)
The topic of this master’s thesis is energy measurement of the optical intensity distribu-tion at the far field. Properties of the optical intensity and the optical power are described. In this thesis solution of wave equation is done. The plane wave, spherical wave and Gaussian beam are described. In this thesis, optical trace of laser beam from transmitter laser diode to receiver PIN photodiode is described. One of the solved problems is diffraction on the lens socket. The basic configuration for diffraction investigation on lens socket was created. There were transmitting laser diode, stop with circular apertures and PIN photodiode used in the experiment. In the other part, thesis deals with measuring and detection of the optical beam. Sorts of photodiodes and their characteristics were analysed.
|
|
|
Design of measurement unit for analysis of surface materials properties
Kratochvíl, Robert ; Rozsívalová, Zdenka (referee) ; Frk, Martin (advisor)
The thesis deals with the application of laser beams for examination of material properties. The properties being examined are quality of surface finish and transmissivity of materials in the optical portion of the electromagnetic spectrum. A measuring device containing laser diodes as a source of laser beam and photodiodes for evaluation of examined phenomena serves for examination of both properties. Conversion of the signal to digital quantity and its further processing take place in a microcontroller. The data is then sent via a serial bus and a converter to a computer, where it may be saved in a user program and where the user can work with them later. The thesis contains results of reflectivity measurement of a set of metal samples with different surface finish. Transmissivity measurement was applied on a set of optical filters.
|
|
|
Laser diode driver
Pučálka, Jan ; Látal, Jan (referee) ; Diblík, Jan (advisor)
The thesis describes the function and an energizer fount design for a laser diode.The main aim was to be familiarized with the requirements for the laser diode construction and to realize the equipment which enables an intensive modulation of a radiated cluster accompanied with a dynamics at least 80% of a maximum radiated output. The introduction of the thesis is focused on the issue of the primary features and elementary ideas concerning the matter of the laser. Moreover the types, infiltration application and the essential laser diode wiring are defined.The conclusion of the thesis is concentrated on the energizer fount linkage for the laser diode.
|
|
|
Laser diode soldering
Straka, Michal ; Holík, Milan (referee) ; Stejskal, Petr (advisor)
This work deals with the laser diode soldering. The theoretical part summarizes general and acquired findings about soldering technology and materials that occur in this process. It also describes factors that affect the reliability of solder joints. It is closely focused to the shaping of the solder joint and structure of intermetallic layer. The practical part of this work is focused on the design of equipment for laser diode soldering and subsequent shaping of the samples. The quality of soldered joint is compared against the quality of joint created using re-flow technology - remelting in in-line smelter. The structure and thickness of the intermetallic layer, the number and shape of the voids in the solder joints are compared.
|
|
|
Pulsed driver for laser diodes
Pernica, Lukáš ; Křepelka, Pavel (referee) ; Drexler, Petr (advisor)
This semestral thesis describes creation of laser radiation in the semiconductor material, the structure of the laser diode and the possibility of using power laser diodes in pulsed mode with high switching frequencies. In the thesis are described methods of casing of power laser diodes and their cooling possibilities and solutions to their switching, evaluating the pros and cons of these solutions and select the most suitable one for the best completion of all requirements.
|
|
| |
|
| |
|
|
Spectral characteristics in fiber optics
Chleboun, Jiří ; Tejkal, Vladimír (referee) ; Šporik, Jan (advisor)
This bachelor’s thesis is focused on the influence of attenuation and dispersion glass and plastic optical fibers in optical transmission system. Theory of optical transmission is discussed in the theoretical part, it is defined term like spectral attenution characteristic and its division into transmission bands. Sources and detectors are itemized further, which are used for optical transmissions in fiber optics. The thesis describes the most occured effects, which influenced transmission parameters of optical fiber, like optical attenution, dispersion and aspectual polarization dispersion. Theory of plastic optical fibers is processed at the end of theoretical part of thesis. It is also processed advantages, disadvantages and useage of plastic optical fibers and they are consequently compare with glass fibers. Comparison is focused mainly on attenuation, transmission properties and useage on these types of fibers in telecommunication. Representation of spectral attenution characteristics in programme MATLAB is practical output of the bachelor´s thesis. Created programme approximates points which are got from measure optical attenuation by the Lagrange interpolation polynomial.
|
|
|
Realization of the optical source with superluminescent diode
Juráň, Jakub ; Levek, Vladimír (referee) ; Čožík, Ondřej (advisor)
This bachelor’s thesis describes design of the optical source with superluminiscent or laser diode. Firstly, the problems of optical sources in the form of laser diodes (coherent light sources) are analyzed. The thesis contains a description of the realization of circuit that includes blocks of temperature and current flow control, block of the power management and the control block. The electrical circuit is divided into the functional modules, their functionality is explained in details. It also includes description of the software designated for controlling of the circuit’s functions.
|
guest ::
