|
Stereo audio amplifier with equalizer and remote control
Lipenský, Lukáš ; Kratochvíl, Tomáš (referee) ; Brančík, Lubomír (advisor)
The bachelor thesis deals with the possibilities of realization, design and construction of a stereo audio amplifier with a pre-assigned ten band graphic equalizer. The amplifier operates in class D and has an output power of 2x140 W into a 4 load, speakers. The signal adjusted by the equalizer can be amplified in the amplifier and reproduced by the speakers or transmitted to a remote receiver, such as headphones, via a bluetooth module. The equalizer has 10 bands for adjusting the frequency characteristics of the signal and the signal level (volume). The settings of the individual, predefined characteristics according to the type of music you are currently listening to can be selected using the IR remote control.
|
|
Switch mode supplies
Hladík, Jan ; Martiš, Jan (referee) ; Patočka, Miroslav (advisor)
This thesis deals with the design of switched power supply for laboratory lessons. Forward converter was chosen as the topology of this power supply. Output voltage is adjustable from 0 V to 32 V. Power supply is capable of output current up to 10 A and output has adjustable current limiting. Following parts were designed: LC filter, pulse transformer, bridge rectifier with capacitor, power MOS-FETs driver, closed loop control with its auxiliary power supply. Cascade closed loop control is used for controlling of designed power supply. Control is analogue, operation amplifiers were used for its construction. PCB was designed for the whole power supply. Power supply was sucessfully assembled and tested.
|
| |
|
Design and construction of audio amplifier with advanced functions
Polkorab, Jaroslav ; Šotner, Roman (referee) ; Brančík, Lubomír (advisor)
This bachelor's thesis focuses on the design of a low frequency class-D amplifier with the minimum output power of 2x50 W. This amplifier will be used for personal use as a HiFi system with advanced features. The design focuses on an encoder controlled preamplifier with an IR remote control, a power amplifier and a switching mode power supply. The PSpice program was selected for the circuit simulation. The schematic designs are created in Easyeda, KiCad and PSpice.
|
| |
|
Switch mode supplies
Hladík, Jan ; Martiš, Jan (referee) ; Patočka, Miroslav (advisor)
This thesis deals with the design of switched power supply for laboratory lessons. Forward converter was chosen as the topology of this power supply. Output voltage is adjustable from 0 V to 32 V. Power supply is capable of output current up to 10 A and output has adjustable current limiting. Following parts were designed: LC filter, pulse transformer, bridge rectifier with capacitor, power MOS-FETs driver, closed loop control with its auxiliary power supply. Cascade closed loop control is used for controlling of designed power supply. Control is analogue, operation amplifiers were used for its construction. PCB was designed for the whole power supply. Power supply was sucessfully assembled and tested.
|