|
| |
|
|
Heating plant modernization and environmental
Sobotka, Tomáš ; Ing.Vladimír Skula (referee) ; Fiedler, Jan (advisor)
The target of this diploma thesis is design of cogeneration unit with following requirements: • Installation of new unit instead of the old and used up one. • Electric energy supply within Supportive service – fast starts • Greening (replacement of coal with natural gas) At the beginning I deal with the current state of old unit. In the next part there is the design of new technological unit, which consists of design of boilers, gas engines, steam turbines. Final phase of the thesis includes economical analysis focused on setting of financial return.
|
|
|
Design of heat recovery steam generator with two pressure levels
Ptáček, Ondřej ; Křemínský, Pavel (referee) ; Baláš, Marek (advisor)
This diploma thesis deals with proposal of a two-lane vertical boiler using the waste heat after gas turbine. In the first part the heat calculation has been done followed by the arrangement of particular heat exchange surfaces and the drawing of real saw diagram. There are also dimensions of drums, inlet and outlet pipes and transfer pipelines drafted. Furthermore, I have listed the materials that are used for casing the boiler and pipelines. Finally, the boiler loss is calculated and the boiler hydraulic calculation is performed. The supplement contains a boiler drawing.
|
|
|
Heat Recovery Steam Generator with Two Pressure Levels
Maršík, Jaroslav ; Kohout, Přemysl (referee) ; Lisý, Martin (advisor)
The Master’s thesis dealing with design of heat recovery steam generator with two pressure levels is split into nine sections. The first section describes the design and the layout of HRSG. The second part deals with heat calculation. The third section deals with design of flue-gas duct. The fourth part describes designs of individual heating surfaces, including steam superheaters, vaporizers and economizer. Next section shows the real temperature diagram and choice of the materials. The seventh section describes the calculation of outer pipelines and the eighth part deals with the drums design. The last section deals with the calculation of draft loss of steam generator.
|
|
|
Gas steam cycle power plant using metelurgic gas
Kysel, Stanislav ; Fiedler, Jan (referee) ; Skála, Zdeněk (advisor)
The main goal of my thesis is to carry out thermic calculations for adjusted conditions of electric and heat energy consumption. The power of the generator is 330 MW. In the proposal, you can find combustion trubines type GE 9171E. Steam-gas power plant is designed to combust metallurgical gases. Effort of the thesis focuses also on giving a new informations about trends in combinated production of electric and heat energy.
|
|
|
Proposal of horizontal dual-pressure heat recovery steam generator
Slíva, Karel ; Svoboda, Petr (referee) ; Baláš, Marek (advisor)
The focus of this thesis is a proposal of a horizontal dual-pressure heat recovery steam generator. The introductory part includes thermal calculation, as well as a design of the layout and a design of the heat transfer surfaces and the layout of the boiler. Individual chapters are broken down according to the outline of the proposal for the arrangement of the heating surfaces, according to the parameters of the flue gas and steam. The master thesis contains a scheme of a real heat transfer temperature diagram and it also includes the calculation of connecting and downcomer pipes and drums. The final part describes the calculation of the boiler draft loss. The main idea of the thesis is accompanied by the technical documentation of the drawing of the boiler.
|
|
|
HRSG with two pressure levels,137,4kg/s, 569°C
Šmejkal, Petr ; Kohout, Přemysl (referee) ; Skála, Zdeněk (advisor)
This thesis deals with thermal calculation and design of proportions and layout of calorific components of a heat recovery steam generator according to given output parameters of steam and input parameters of flue gas. Furthermore, the proportions of boiler drums and irrigation and transfer pipes are designed and draught losses are calculated.
|
|
|
Design of a combined cycle electricity source
Kadáková, Nina ; Kolat, Pavel (referee) ; Milčák, Pavel (advisor)
A combined cycle is one of the thermal cycles used in thermal power plants. It consists of a combination of a gas and a steam turbine, where the waste heat from the gas turbine is used for steam generation in the heat recovery steam generator. The aim of the diploma thesis was the conceptual design of a combined cycle electricity source and the balance calculation of the cycle. The calculation is based on the thermodynamic properties of the substances and the basic knowledge of the Brayton and Rankin-Clausius cycle. The result is the amount and parameters of air, flue gases, and steam/water in individual places and the technological scheme of the source, in which these parameters are listed.
|
|
|
Proposal two-pressures horizontal waste heat boiler
Med, Lukáš ; Svoboda, Petr (referee) ; Baláš, Marek (advisor)
This master's thesis deals with thermal calculation and design of proportions of calorific components of a heat recovery steam generator (HRSG), which is placed behind a combustion turbine, for given parameters of exhaust gases and requested parameters of steam. In the first chapters is described the design, layout of HRSG and the thermal calculation. The next parts deal with the design of flue-gas duct and each individual heating surface. Next section shows computations of dimensions of drums, flooding pipes, transferring pipes and all other outer pipes. The chosen materials are described in one of the last chapters and the last chapter deals with calculation of draft loss of steam generator.
|
|
|
Design turbines to combined cycle
Veselý, Petr ; Kracík, Petr (referee) ; Fiedler, Jan (advisor)
The topic of thesis is condensing turbine in gas-steam cycle, which can be divided into four basic parts. A history of gas-steam cycle is described in the beginning. Second part is all about calculation of heat recovery steam generator. Penultimate section deals with calculations of steam turbine parameters and reaction blading type. Last part contains electric power and steam turbine efficiency.
|
guest ::
