|
| |
|
|
Antioxidant enzymes response to abiotic stress. Impact of decreased cytokinin level.
Lubovská, Zuzana ; Wilhelmová, Naďa (advisor) ; Prášil, Ilja (referee) ; Kočová, Marie (referee)
Charles University in Prague, Faculty of Science Department of Experimetnal Plant Biology Ph.D. study program: Plant physiology and anatomy Abstract Antioxidant enzymes response to abiotic stress. Impact of decreased cytokinin level. Zuzana Lubovská Supervisor: RNDr. Naďa Wilhelmová, CSc. Supervisor-consultant: RNDr. Helena Štorchová, CSc. Praha, 2015 The response of the antioxidant enzyme system to drought, heat and a combination of these stresses was followed in tobacco plants overexpressing cytokinin oxidase/dehydrogenase1 (CKX1) under the root-specific WRKY6 promoter (W6:CKX1 plants) and under the constitutive 35S promoter (35S:CKX1 plants) and in the corresponding wild type (WT). CKX1 over-producing lines developed a bigger root system, which contributed to their stress tolerance. The high stress tolerance of 35S:CKX1 plants was also associated with a dwarf shoot phenotype and changed leaf morphology. The genes for chloroplastic antioxidant enzymes, stroma ascorbate peroxidase (sAPX), thylakoid ascorbate peroxidase (tAPX) and chloroplastic superoxide dismutase (FeSOD), which are responsible for scavenging of reactive oxygen species produced via electron transfer during photosynthesis, were all strongly transcribed in control conditions. All the tested stresses down-regulated expression of these genes...
|
|
|
Calculation of thermal resistance of finned heatsink
Kyanka, Radim ; Huták, Petr (referee) ; Toman, Marek (advisor)
This bachelor's thesis is focused on the problem with analytical calculations needed to define thermal resistance of finned heat sinks. First it describes how temperature proceeds at different boundary conditions at fin tip. Than it describes different mechanisms of heat transfer, equlation of heat resistance especially of natural and forced convection. To verify the results there is comparison between analytical equlations written in Matlab program and measuring results.
|
|
|
Cooker With Thermoelectric Charging
Trchalík, Mirek ; Paluřík, Michal
Our project deals with the development and production of ecological cooker, that, in additionto heating food or water, will also be used to produce elektricity for recharging batteries. Theproduct is intended for those who often camp, fish or stay in nature outside civilization for a longtime. The cooker can be used as a heat source, also in the preparation of meals, in addition to theproduction of electricity after recharging the batteries and powering various electrical devices viaUSB ports.
|
|
|
Application Of Graphite In Thermal Management Of Microelectronics
Havlicek, Vaclav ; Vyroubal, Petr
This paper is shortly describing the possibility to improve the thermal management of microelectronics by implementing carbon-based materials, more exactly graphite foils. It explains current thermal challenges in the field of microelectronics and moves to commonly used materials, where it adds carbon allotropes into the scope, with a special focus on graphite foils. In the last part, this paper contains a use case of the pyrolytic graphite sheet in thermal management.
|
|
|
Energy usage of beer production
Maťa, Jakub ; Tuhovčák, Ján (referee) ; Hejčík, Jiří (advisor)
The bachelor thesis deals with the issue of energy consumption of beer production. The first part focuses on the technology of beer production itself, the understanding of which is a key prerequisite for assessing the possibility of using a heat pump for this process. The main part then describes the individual processes and their energy consumption. Finally, it evaluates the use of a heat pump and shows if it could reduce the energy requirements of beer production.
|
|
|
Energy supply for greenhouse production
Najbrtová, Zuzana ; Poláčik, Ján (referee) ; Pospíšil, Jiří (advisor)
The import of the vegetable has prevailed in the long run over the own production. In connection with this reality and increasing demand for the food with higher quality the production greenhouse is more often built. The providing heat, cold and electricity for the year-round operation is related to the construction and working of these objects. The theoretical part of this theses describes possible ways how to cover energy consumption for the model greenhouse in Kožichovice, Třebíč region. The heat losses and the year-round heat consumption were stated for the selected model and compared with the exact values from Kožichovice. The following method of energy supply was selected based on the calculated energy consumption - the separate cogeneration unit, cooperation of several cogeneration units, a biogas station, a heat pump and central heating system. These methods of energy supply were subjected to technical and economical comparison.
|
|
| |
|
|
Heat recovery
Kovaříček, Jakub ; Toman, Filip (referee) ; Baláš, Marek (advisor)
This work deals with the design of a heat exchanger for the use of the heat of the gas generated during the gasification of biomass. The gas flowing in the tubular space of the exchanger will be cooled to the required temperature by the air flowing in the intermediate tube space. It is therefore a gas-air bundle exchanger, the outlet air temperature of which is unknown. The introductory part includes an overview of possible designs of exchangers according to several parameters, requirements for exchangers and their functions. The second part deals with the design of the exchanger itself, starting with the determination of physical and other properties of working media, through geometric parameters, the balance of the exchanger and finally the determination of pressure losses of the exchanger.
|
|
|
Conceptual design of a heat switch installation into a structure of satellite
Vrba, Martin ; Horák, Marek (referee) ; Mašek, Jakub (advisor)
Tato diplomová práce je zaměřena na sestavení přehledu konstrukcí a teplených cest kosmických lodí a kosmických vozidel, které se v současné době používají. Na základě specifických požadavků a standardů jsou vypracovány koncepční návrhy zástavby tepelného spínače do konstrukce družice. V jednotlivých kapitolách jsou popsány určité členy, které se na vedení tepla podílí a jsou důležité pro navrhované koncepty z pohledu konstrukce. Diplomová práce popisuje postupy výpočtu tepelných vodivostí a rozložení působící tíhové síly do míst uchycení pro jednotlivé koncepty. Na závěr provádí hodnocení a výběr potenciálně nejvhodnějšího návrhu.
|
guest ::
