|
|
Analysis, assessment and management of risks of manufacturing process
Ďurovcová, Júlia ; Balgová, Zuzana (referee) ; Hrabová, Kristýna (advisor)
This thesis focuses on risk management in the production process of Frentech Aerospace, s.r.o. At the beginning the thesis covers the theoretical background of risk management, quality management and safety. This knowledge has been expanded with quality and safety requirements based on international standards. For a proper measurement of the identified hazards, a perfect understanding of the evaluated system is necessary. For this reason, the method of process flow diagrams was used to provide a visual representation of the company's production process, together with a description of the individual production operations. The FTA method was selected to identify the causes of the failure conditions, which provided the basis for the final failure mode and consequence analysis. Due to the systematic approach of risk identification and assessment, the most serious process risks were selected. These are provided in the thesis with recommended preventive suggestions that lead to the minimization of the identified risks.
|
|
|
Risks of Order Processing in the Selected Company
Matlasová, Monika ; Vyskočilová, Jaroslava (referee) ; Milichovský, František (advisor)
The diploma thesis deals with the issue of risk management during order processing in the production company, named Slévárna Kuřim, a.s., which produces castings. The first part of the thesis presents the theoretical background. In the practical part, a specific company is introduced, an order processing is described, and all possible risks that may occur during order processing are identified. Their identification is done by using selected tools - the FMEA method and the Ishikawa diagram. The goal of the diploma thesis is to identify possible risks based on performed analysis and for the most serious risks propose measures that would minimize them.
|
|
|
Centering device for truck tire for robot handling
Mlejnek, Pavel ; Winkler, Tomáš (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with the design and solving construction of devices for centering cargo tires. Another part of this work is a concept of the clamping head for fixation of tires by industrial robot and its following placement on a palette. Construction solution will be drawn up with access and without access of human operator. All structural variations will be reviewed by risk analysis and analysis of possible incidence and influence of defects.
|
|
|
Reliability assessment of the Safety Helmets Manufacturing Process
Kartali, Csaba ; Rozehnalová, Jana (referee) ; Blecha, Petr (advisor)
The theoretical part of this master thesis lists all the necessary prerequisites which are needed in order to carry out a full and comprehensive reliability assessment of any given process. To do so it provides an overview of reliability in general, mathematical and statistical guidance together with a more detailed picture of the application and description of the process by quantifiable indicators. Furthermore it gives an overview of two important analysis tools, such as FTA and FMEA, accompanied by the basic principle and summary of the Six Sigma methodology and tools. The practical part of the thesis deals with the detailed description, quantification and goals of the process of safety helmet manufacturing and testing in order to be able to carry out a suitable assessment of the reliability by using the necessary set of tools and methods in order to identify the failures and their causes in the process by addressing them with suitable means of changes and corrective actions.
|
|
|
Risk Manufacturing Companies in the Field of Human Resources
Huťková, Miroslava ; Pekařová, Blanka (referee) ; Škapa, Stanislav (advisor)
This thesis named Risk Manufacturing Companies in the Field of Human Resources reacts to increasing concern for risks nowadays. The theoretical part is dealing with general definition of risk, is giving examples of risk distinguishing and is implicating a risk factor into a company´s decision. Current theoretical knowledge of risk is connected to human resources area. Risk analysis is focusing on manufacturing process of specific company, specifically for a possible origin of risk situations caused by human factor which are employees. SWOT analysis, Ishikawa diagram, FMEA and risk matrix were used as risk methods. These helped to reveal risks and both preventive and corrective measures were proposed.
|
|
|
Predictive machine tools maintenance system with the use of vibrodiagnostics
Semotam, Petr ; Nahodil, Petr (referee) ; Hammer, Miloš (advisor)
This diploma thesis concerns issues of predictive and condition based maintenance system of machine tools with using a vibrodiagnostics. It studies and researches its impacts through the basic processes of the maintenance system and characterizes the vibration diagnosis as its tool and mean. There is also described a process of putting condition based maintenance into practice in the practical part of the thesis. The development is realized at Siemens Ltd. Brno with all its requirements and aspects such as a maintenance audit which means the decision on the suitability of condition based maintenance within the current maintenance system, technical analysis as a part of introduction of vibration diagnosis and the practical example of acquiring, recording and assessment of measured vibration. Prior to the end the economic evaluation of the planned predictive maintenance system and the design of the general model of development and implementation of the maintenance system into practice are included.
|
|
|
Risks of Order Processing in the Selected Company
Baláková, Tereza ; Suchomel, Kamil (referee) ; Milichovský, František (advisor)
The diploma thesis deals the risk management during order processing in the engineering company Balák stroje Tišnov Ltd., a producer of custom machines. The aim of the diploma theses is to identify and evaluate the risks that may arise during the order processing. A partial aim is to propose a list of recommendations to minimize the most serious risks. The thesis is divided into three parts, where the first part of the thesis is focused on theoretical basis. The second part – analytical part contains the introduction of the company, the research part, description of the order processing and risks identification and evaluation, using selected methods – FMEA and Ishikawa diagram. The last part contains proposals for mitigating the most serious risks.
|
|
|
Analysis, assessment and management of risks of manufacturing process
Ďurovcová, Júlia ; Balgová, Zuzana (referee) ; Hrabová, Kristýna (advisor)
This thesis focuses on risk management in the production process of Frentech Aerospace, s.r.o. At the beginning the thesis covers the theoretical background of risk management, quality management and safety. This knowledge has been expanded with quality and safety requirements based on international standards. For a proper measurement of the identified hazards, a perfect understanding of the evaluated system is necessary. For this reason, the method of process flow diagrams was used to provide a visual representation of the company's production process, together with a description of the individual production operations. The FTA method was selected to identify the causes of the failure conditions, which provided the basis for the final failure mode and consequence analysis. Due to the systematic approach of risk identification and assessment, the most serious process risks were selected. These are provided in the thesis with recommended preventive suggestions that lead to the minimization of the identified risks.
|
|
|
Risks of Order Processing in the Selected Company
Baláková, Tereza ; Suchomel, Kamil (referee) ; Milichovský, František (advisor)
The diploma thesis deals the risk management during order processing in the engineering company Balák stroje Tišnov Ltd., a producer of custom machines. The aim of the diploma theses is to identify and evaluate the risks that may arise during the order processing. A partial aim is to propose a list of recommendations to minimize the most serious risks. The thesis is divided into three parts, where the first part of the thesis is focused on theoretical basis. The second part – analytical part contains the introduction of the company, the research part, description of the order processing and risks identification and evaluation, using selected methods – FMEA and Ishikawa diagram. The last part contains proposals for mitigating the most serious risks.
|
|
|
Reliability assessment of the Safety Helmets Manufacturing Process
Kartali, Csaba ; Rozehnalová, Jana (referee) ; Blecha, Petr (advisor)
The theoretical part of this master thesis lists all the necessary prerequisites which are needed in order to carry out a full and comprehensive reliability assessment of any given process. To do so it provides an overview of reliability in general, mathematical and statistical guidance together with a more detailed picture of the application and description of the process by quantifiable indicators. Furthermore it gives an overview of two important analysis tools, such as FTA and FMEA, accompanied by the basic principle and summary of the Six Sigma methodology and tools. The practical part of the thesis deals with the detailed description, quantification and goals of the process of safety helmet manufacturing and testing in order to be able to carry out a suitable assessment of the reliability by using the necessary set of tools and methods in order to identify the failures and their causes in the process by addressing them with suitable means of changes and corrective actions.
|
guest ::
