|
|
Retractible landing gear design for Z 143 LSi airplane
Gregor, Jiří ; Vaněk, František (referee) ; Píštěk, Antonín (advisor)
The diploma thesis deals with the design of the replacement the Z 143 LSi landing gear with the new VUT 100 type landing gear in a retractable system. The first part of this thesis is devoted to the description of the Z 143 LSi aircraft and its landing gear and the description of the retractable landing gear type VUT 100. The next part describes the possible variants of the installation the VUT 100 landing gear, which are critically evaluated. Then there is selected the final variant for the installation, which is designed in Catia V5 software. The final design includes remotorization with Lycoming IO-390 and new design of engine bed. For the proposed solution, a new mass analysis with the calculation of centrations, new cases of ground load, a new flight envelope of load and additional cases of load of a new engine bed are prepared. The proposed engine bed is analyzed by the finite element calculation method in the MS Patran software. Finally, a possible scheme of the chassis retraction system is proposed.
|
|
|
Replica Design of L-40 "Meta Sokol " Airctaft - fuselage
Růžička, Miroslav ; Pešák, Miroslav (referee) ; Píštěk, Antonín (advisor)
This diploma thesis deals with the design of all-metal construction of fuselage of the replica L-40 Meta Sokol aircraft on the basis of CS-VLA regulation. As far as the aircraft is concerned, the thesis establishes the load of tail surfaces, landing gear and engine bed. Futhermore, it designs the construction of fuselage, tail landing gear, including the system of its retraction, wing-fuselage connection, engine bed and the primary design of cockpit. In the end, the thesis focuses on the fuselage production technology.
|
|
|
Aircraft design for the installation of a hybrid powerplant
Kapoun, Tomáš ; Bencalík, Karol (referee) ; Píštěk, Antonín (advisor)
The master‘s thesis "Aircraft design for the installation of a hybrid powerplant" is focused on the design of the airplane suitable for hybrid powerplant. At the same time it is also deal with the most suitable location of the components necessary for this powerplant. These components are: a combustion engine, electric motor, gearbox and bed engine. Part of the master thesis is application-mount designed components: location and number of containers with batteries, a proposal for a new engine bed suitable for a hybrid powerplant. In the sub - section of the thesis is made a simple calculation of the economic return on investment from the perspective of the end-user aircraft with a hybrid powerplant.
|
|
| |
|
| |
|
|
Remotorization of the aircraft EV-55 Outback
Puller, Tomáš ; Weis, Martin (referee) ; Horák, Marek (advisor)
Thesis Remotorization of the aircraft EV-55 Outback deals with possibility of installationt piston diesel engine instead of turboprop engine PT6A-21. Begining of this thesis deals with choice of convenient engine and propeller. Then, 3D model of engine bed is designed, followed by mass analysis. Based on results from the mass analysis and requirements from the CS - 23 regulation, load is specified and stress analysis is done. The other part of this thesis deals with adjustment of the airframe and with calculation of flight performances. Finally, economic indices are specified.
|
|
|
Retractible landing gear design for Z 143 LSi airplane
Gregor, Jiří ; Vaněk, František (referee) ; Píštěk, Antonín (advisor)
The diploma thesis deals with the design of the replacement the Z 143 LSi landing gear with the new VUT 100 type landing gear in a retractable system. The first part of this thesis is devoted to the description of the Z 143 LSi aircraft and its landing gear and the description of the retractable landing gear type VUT 100. The next part describes the possible variants of the installation the VUT 100 landing gear, which are critically evaluated. Then there is selected the final variant for the installation, which is designed in Catia V5 software. The final design includes remotorization with Lycoming IO-390 and new design of engine bed. For the proposed solution, a new mass analysis with the calculation of centrations, new cases of ground load, a new flight envelope of load and additional cases of load of a new engine bed are prepared. The proposed engine bed is analyzed by the finite element calculation method in the MS Patran software. Finally, a possible scheme of the chassis retraction system is proposed.
|
|
| |
|
|
Aircraft design for the installation of a hybrid powerplant
Kapoun, Tomáš ; Bencalík, Karol (referee) ; Píštěk, Antonín (advisor)
The master‘s thesis "Aircraft design for the installation of a hybrid powerplant" is focused on the design of the airplane suitable for hybrid powerplant. At the same time it is also deal with the most suitable location of the components necessary for this powerplant. These components are: a combustion engine, electric motor, gearbox and bed engine. Part of the master thesis is application-mount designed components: location and number of containers with batteries, a proposal for a new engine bed suitable for a hybrid powerplant. In the sub - section of the thesis is made a simple calculation of the economic return on investment from the perspective of the end-user aircraft with a hybrid powerplant.
|
|
|
Remotorization of the aircraft EV-55 Outback
Puller, Tomáš ; Weis, Martin (referee) ; Horák, Marek (advisor)
Thesis Remotorization of the aircraft EV-55 Outback deals with possibility of installationt piston diesel engine instead of turboprop engine PT6A-21. Begining of this thesis deals with choice of convenient engine and propeller. Then, 3D model of engine bed is designed, followed by mass analysis. Based on results from the mass analysis and requirements from the CS - 23 regulation, load is specified and stress analysis is done. The other part of this thesis deals with adjustment of the airframe and with calculation of flight performances. Finally, economic indices are specified.
|
guest ::
