|
|
Design of structures with FRP reinforcement
Matušíková, Anna ; Vácha, Jaroslav (referee) ; Štěpánek, Petr (advisor)
This diploma thesis presents available FRP software for calculating load bearing capacity of the structures reinforced with FRP and compares them between each other. Furthermore theory and algorithm of my own software is presented here. Load bearing capacity of structures which are reinforced with non-metallic reinforcement and loaded by combination of normal force and bending moment can be solved by my programme. Effects of high temperatures on the concrete structures can be included in the calculation. In the second part of the thesis is calculated load-bearing capacity and deflection of the real beam reinforced with FRP reinforcement and load-bearing capacity of member with FRP reinforcement with effect of elevated temperature. This has been done using my software. Comparison of results from hand calculation and laboratory load-bearing testing is done at the end. This laboratory testing was accomplished by Institute of Concrete and Mansory Structures at our faculty.
|
|
|
Monitoring of temperature influence on properties of lead-acid accumulators
Musil, Petr ; Křivík, Petr (referee) ; Bača, Petr (advisor)
This thesis deals with lead-acid battery, its parameters and temperature behaviour of this electro-chemical source of power. In the theory section, types of batteries are presented, followed by their primary parameters and electro-chemical reactions, which take part in battery cells. This section also contains information about charging stages, detailed description of each battery part, used materials, construction of the battery and degradation processes caused by battery operation. The practictal section of this thesis offers a measurement scheme for automated measuring workstation. Furthermore, the practical section presents results of measurements on parameters of chosen lead-acid battery types, it also contains long-term deep battery cycling and measurements under elevated temperatures. Detailed comparison of measurements results and datasheet values is included. Conclusion sums up parameters of chosen lead-acid battery types and their feasibility for further usage in power backuping.
|
|
|
Evaluation Of Temperature Influence on Lithium-ion Battery Properties
Zachová, Zuzana ; Libich, Jiří (referee) ; Bača, Petr (advisor)
This diploma thesis deals with monitoring of the influence of temperature on the properties of lithium-ion batteries, especially on the safety and capacity of selected batteries. Chapters 1 and 2 contain a literature review on the subject, describing electrochemical energy sources, especially secondary accumulators, mainly lithium-ion cells. Furthermore, the safety and degradation processes of lithium-ion batteries are discussed and the third chapter describes the design of experiments, realization and outputs of these experiments.
|
|
|
Evaluation Of Temperature Influence on Lithium-ion Battery Properties
Zachová, Zuzana ; Libich, Jiří (referee) ; Bača, Petr (advisor)
This diploma thesis deals with monitoring of the influence of temperature on the properties of lithium-ion batteries, especially on the safety and capacity of selected batteries. Chapters 1 and 2 contain a literature review on the subject, describing electrochemical energy sources, especially secondary accumulators, mainly lithium-ion cells. Furthermore, the safety and degradation processes of lithium-ion batteries are discussed and the third chapter describes the design of experiments, realization and outputs of these experiments.
|
|
|
Monitoring of temperature influence on properties of lead-acid accumulators
Musil, Petr ; Křivík, Petr (referee) ; Bača, Petr (advisor)
This thesis deals with lead-acid battery, its parameters and temperature behaviour of this electro-chemical source of power. In the theory section, types of batteries are presented, followed by their primary parameters and electro-chemical reactions, which take part in battery cells. This section also contains information about charging stages, detailed description of each battery part, used materials, construction of the battery and degradation processes caused by battery operation. The practictal section of this thesis offers a measurement scheme for automated measuring workstation. Furthermore, the practical section presents results of measurements on parameters of chosen lead-acid battery types, it also contains long-term deep battery cycling and measurements under elevated temperatures. Detailed comparison of measurements results and datasheet values is included. Conclusion sums up parameters of chosen lead-acid battery types and their feasibility for further usage in power backuping.
|
|
|
Design of structures with FRP reinforcement
Matušíková, Anna ; Vácha, Jaroslav (referee) ; Štěpánek, Petr (advisor)
This diploma thesis presents available FRP software for calculating load bearing capacity of the structures reinforced with FRP and compares them between each other. Furthermore theory and algorithm of my own software is presented here. Load bearing capacity of structures which are reinforced with non-metallic reinforcement and loaded by combination of normal force and bending moment can be solved by my programme. Effects of high temperatures on the concrete structures can be included in the calculation. In the second part of the thesis is calculated load-bearing capacity and deflection of the real beam reinforced with FRP reinforcement and load-bearing capacity of member with FRP reinforcement with effect of elevated temperature. This has been done using my software. Comparison of results from hand calculation and laboratory load-bearing testing is done at the end. This laboratory testing was accomplished by Institute of Concrete and Mansory Structures at our faculty.
|
|
|
Fatigue life and fracture of cast gamma TiAl intermetallic alloy at room and elevated temperatures
Petrenec, Martin ; Šmíd, Miroslav ; Polák, Jaroslav
The low-cycle fatigue properties, surface relief and fracture surfaces of cast TiAl alloys with 2 at.% Nb having nearly lamellar microstructure were studied at room temperature and at 750 degrees C. Cyclic stress-strain curves (CSSC) and fatigue life curves were obtained at both temperatures. The surface relief and the fracture surfaces of fractured specimens were observed using scanning electron microscopy. At room temperature, significant cyclic hardening is observed whereas at 750 degrees C cyclic response was stable. Parameters of the CSSC, the Manson-Coffin law and the Basquin law were determined. Persistent slip markings formed along interlamellar interfaces were predominant locations for fatigue cracks at both temperatures. The cracks initiated at surface or in sub-surface region led to the formation of smooth flat areas on the fracture surface corresponding to the persistent slip bands.
|
|
| |
|
| |
|
|
Measurement of electro-optical properties of quantum-size structures based on InAs/GaAs - photocurrent and electroluminescence
Mačkal, Adam ; Hazdra, P. ; Hulicius, Eduard ; Oswald, Jiří ; Pangrác, Jiří ; Melichar, Karel ; Hospodková, Alice ; Šimeček, Tomislav
Contribution presents the electroluminescence, photoabsorption and polarization properties of semiconductor lasers with thin strained InAs layers in GaAs at elevated temperatures. The lasers exhibit high optical recombination efficiency, low threshold current density and wide temperature operation range (above 100řC).
|
guest ::
