|
|
Aircraft Maintenance
Phung, Nhu Binh ; Třetina, Karel (referee) ; Finda, Jindřich (advisor)
This thesis is summarized knowledge the broblems and evaluation of current status in process plan in manitenance of small transport aircraft. State characteristics and applicability to non-destructive inspection methods in the maintenance of aircraft
|
|
|
Modern low-emission combustion chamber for jet engines
Mašek, Jakub ; Nastálek, Ondřej (referee) ; Šplíchal, Miroslav (advisor)
Bachelor´s thesis examines modern low-emission combustion chambers for jet engines. It´s foremost aim is to specify construction parameters of low-emission combustion chambers, compare it´s features and comprise the use of these combustors in civil aviation. Thesis deals with reasons of modern low-emission combustion chamber development and estimate future development in the region of aircraft industry. Another aim is to specify legislations of aviation emissions, history of certification standards and organizations, which make and control these limits.
|
|
|
Emergency responce planing in approved traning organization
Jedlička, Petr ; Švec, Michal (referee) ; Šplíchal, Miroslav (advisor)
This master‘s thesis is focused on the creation of the Emergency Response Plan (ERP) for an Approved Training Organisation (ATO). The first part of this thesis describes aviation organisations and other transport organisations that require Safety management system. The second part analyses requirements for documentation and regulations for applying Emergency Response Plan. In the third section there is an ERP general manual which helps ATO with the creation of the document. The last part contains the ERP created for a model ATO with the help of the general manual from the third chapter.
|
|
|
Mathematical model verification for flight simulator
Kminiaková, Tatiana ; Zikmund, Pavel (referee) ; Sklenář, Filip (advisor)
The diploma thesis deals with the flight test program which is necessary to obtain the required data for EASA/FAA flight simulator certification. Flight tests are focused on flight performance and characteristics. Required regulations are selected and described. To verify the simulator model and certification parameters a flight test program was created. The flight test program is composed of flight and ground tests. In the final part of the thesis, the flight test evaluation procedure is shown. Each test contains the final valuation or recommendation for simulator model modification.
|
|
|
ATO Operations Manual - Training section
Oršula, Jaroslav ; Šplíchal, Miroslav (referee) ; Hammer, Jaromír (advisor)
This bachelor’s thesis is focused on the topic of flight trainings in Approved Training Organisations - ATOs. The first part of the thesis describes individual requirements on such an organisation, considering personnel, manuals, aircraft and training regulations. Subsequently, conditions for the issue of a certificate of an Approved Training Organisation and the part D of the Operations manual are described. At the end, these findings are implemented into the design of the Operations manual Part D for the Institute of Aerospace Engineering at Brno University of Technology.
|
|
|
Maintenance of Small Transport Aircraft with Application MSG-3 Methodology
Trefilová, Helena ; Třetina, Karel (referee) ; Finda, Jindřich (advisor)
Master’s thesis deals with problems of maintenance of small transport aircraft with application MSG-3 methodology and maintenance plan development. It is aimed at systems and powerplant maintenance. This method is applied on L-410UVP-E20 aircraft. Other parts of this work are assessment of recent situation in maintenance of airplanes, used approaches to maintenance, methods and documentation for maintenance. Last part of this work is practical example of MSG-3 process on assign item and its interpretation.
|
|
|
Mathematical model verification for flight simulator
Kminiaková, Tatiana ; Zikmund, Pavel (referee) ; Sklenář, Filip (advisor)
The diploma thesis deals with the flight test program which is necessary to obtain the required data for EASA/FAA flight simulator certification. Flight tests are focused on flight performance and characteristics. Required regulations are selected and described. To verify the simulator model and certification parameters a flight test program was created. The flight test program is composed of flight and ground tests. In the final part of the thesis, the flight test evaluation procedure is shown. Each test contains the final valuation or recommendation for simulator model modification.
|
|
|
ATO Operations Manual - Training section
Oršula, Jaroslav ; Šplíchal, Miroslav (referee) ; Hammer, Jaromír (advisor)
This bachelor’s thesis is focused on the topic of flight trainings in Approved Training Organisations - ATOs. The first part of the thesis describes individual requirements on such an organisation, considering personnel, manuals, aircraft and training regulations. Subsequently, conditions for the issue of a certificate of an Approved Training Organisation and the part D of the Operations manual are described. At the end, these findings are implemented into the design of the Operations manual Part D for the Institute of Aerospace Engineering at Brno University of Technology.
|
|
|
Emergency responce planing in approved traning organization
Jedlička, Petr ; Švec, Michal (referee) ; Šplíchal, Miroslav (advisor)
This master‘s thesis is focused on the creation of the Emergency Response Plan (ERP) for an Approved Training Organisation (ATO). The first part of this thesis describes aviation organisations and other transport organisations that require Safety management system. The second part analyses requirements for documentation and regulations for applying Emergency Response Plan. In the third section there is an ERP general manual which helps ATO with the creation of the document. The last part contains the ERP created for a model ATO with the help of the general manual from the third chapter.
|
|
|
Maintenance of Small Transport Aircraft with Application MSG-3 Methodology
Trefilová, Helena ; Třetina, Karel (referee) ; Finda, Jindřich (advisor)
Master’s thesis deals with problems of maintenance of small transport aircraft with application MSG-3 methodology and maintenance plan development. It is aimed at systems and powerplant maintenance. This method is applied on L-410UVP-E20 aircraft. Other parts of this work are assessment of recent situation in maintenance of airplanes, used approaches to maintenance, methods and documentation for maintenance. Last part of this work is practical example of MSG-3 process on assign item and its interpretation.
|
guest ::
