|
|
The water flow simulation in the cesspit
Šrámková, Dagmar ; Hyánková, Eva (referee) ; Kriška-Dunajský, Michal (advisor)
This diploma thesis consists of two parts, part research and part attachments. The first section describes the literary problems of today's way of cleaning wastewater from small producers and characteristics of wastewater. The work is focused on the aspect of nature and all of these methods are directed towards this direction. The literary section is devoted to anaerobic environment, which is just one of the natural ways of treatment of waste water, in our case in a septic tank. The second part of the thesis deals with modeling of flow and behavior of sludge and water mixture in the cesspit septic tank sludge with variable densities and flow speeds. Modeling and calculations are made using COMSOL Multhiphysics. The conclusion is then summarized findings from the flow cesspit septic tank with the results and the assessment of whether a septic tank still has its place among the modern methods of wastewater treatment.
|
|
|
Microrheology modeling with COMSOL Multiphysics package
Koláček, Jakub ; Sedláček, Petr (referee) ; Pekař, Miloslav (advisor)
This bachelor thesis focuses on modeling Brownian motion using the COMSOL Multiphysics package and its Particle Tracing module. The aim of the work is to design and create elementary models that will be able to suitably simulate the movement of microparticles in viscous and viscoelastic environments, which can later be used for modeling passive microrheology. Within this work, Matlab scripts were created for the calculation of MSD from the simulation results, validation of the viscous model was performed on experimental data and elementary models for the simulation of the viscoelastic environment were also designed. Two different approaches were chosen for the design of these models, namely the use of rigid obstacles under the assumption of a discrete environment and a mathematical model assuming continuous environment. Data from the viscous model showed good agreement with the experimental results. The results of viscoelastic simulations are presented, and further possible development of these models is discussed. The continuous mathematical model is considered closest to modeling viscoelastic behavior because of a characteristic curvature that was observed in the evaluation of MSD.
|
|
|
Multiband magnetic antenna
Ryšánek, Martin ; Hertl, Ivo (referee) ; Raida, Zbyněk (advisor)
The thesis deals with a parametric analysis of a magnetic multiband antenna and explains the principle of its operation. In the thesis, an optimization of the antenna by the particle swarm optimization is performed in order to meet impedance matching in prescribed frequency bands.
|
|
|
Computer modeling of laser beam
Mittner, Ondřej ; Wilfert, Otakar (referee) ; Raida, Zbyněk (advisor)
This bachelor’s thesis theoretically describes Gaussian beam, its characteristics and its passing through optical elements. The main attention is focused on creating of computer models of Gaussian beam in COMSOL Multiphysics application, detailed description of these models, presentation of achieved results and comparing these results with theoretic presumptions.
|
|
|
Elektromagnetic field mapping in tissue
Port, Martin ; Čížek, Martin (referee) ; Rozman, Jiří (advisor)
This thesis is an introduction to the modeling of electromagnetic fields in the tissue and is focused on the knowledge of electromagnetic field theory. Maxwell's equations and their solutions are described the spread of plane waves in the environment. It also discusses the exposure limit values of specific absorbed power and hygienic limits based on the standards in force in the Czech Republic on health protection against nonionizing radiation in accordance with Government Regulation No. 106/2010 Coll. It also deals with the software interface in COMSOL Multiphysics 4.2 for solving physical modeling and simulation. There is mention of the RF module, which is used for modeling. Work mentions in detail about the menu of the program and the most important part - the Model Builder.
|
|
|
Modelling of organic electrochemical transistors
Truksa, Jan ; Omasta, Lukáš (referee) ; Salyk, Ota (advisor)
The topic of this work is the making of a virtual model of a circular organic electrochemical transistor (OECT) and its electric field, and comparison of the computed results to a real system of rotationally symmetrical electrodes. The electric potential field in the transistor was modelled using the finite element method and the electric field and current field were determined using the results. Later, the electric potential field was mapped in a real system of aluminium electrodes, submerged in water. The electric field model of an unusually configured circular OECT is presented in this work. Due to insufficient computing capacity, the model had to be significantly simplified. The computed results agree with the experimentally determined potential field despite the simplification. The deviations of the model output characteristic from real OECT characteristic were caused by simplifying the model in respect to reality.
|
|
|
Computer modeling of MOSFET transistor
Major, Jan ; Harwot, Ondřej (referee) ; Pokorný, Michal (advisor)
Work is focused on computer modeling of PN junction and MOSFET transistor in the program COMSOL Multiphysics and in program TiberCAD. The text is discussed on the drift and diffusion in semiconductors. Also shown is a method of modeling the PN junction and MOSFET transistor in the programs and compare models.
|
|
|
Utilization of artificially created weak magnetic field for navigation in 3D space
Váňa, Dominik ; Beneš, Petr (referee) ; Havránek, Zdeněk (advisor)
This master's thesis focuses on the utilization of an artificially created weak magnetic field for navigation in 3D space. The theoretical part of this work deals with the general properties of the magnetic field and with its description. The next section of the theoretical part contains an overview of measuring principles for magnetic field measurements. Based on various types of measuring principles, the thesis elaborates on commercially available miniature sensors for magnetic field measurement with a measuring range up to 10 mT. The work focuses mainly on the magnetoresistive principle and fluxgate sensors. Furthermore, the theoretical part contains descriptions of methods for modeling the magnetic field of simple permanent magnets and various magnet assemblies. Lastly, the theoretical part involves a patent search of devices used for locating magnets that are installed in an intramedullary nail, which is used in intramedullary stabilization used on fractures of human bones. By locating the magnet in the nail, it is possible to precisely determine the position of the mounting holes. The practical part of the thesis deals with the analysis of magnetic field behavior in the vicinity of various magnetic assemblies, which were modeled in COMSOL Multiphysics using the finite element method. The models were created with the aim of analysing the behaviour of the magnetic field in the vicinity of the magnets and at the same time to find possible analytical functions that could be used to determine the position of the magnet in space relative to the probe. The result of this work is an analysis of various assemblies, which contains graphs of different dependencies and prescription of polynomial functions that approximate these dependencies. Another part of the thesis is the design of a probe that serves to locate the magnetic target. The work describes two possible methods of localization. For the differential method, a user interface in LabVIEW was created. The probe based on this method is fully capable of locating the magnet in the 2D plane. The state space search method is described only in theory.
|
|
|
Modelling of bioelectronic devices
Truksa, Jan ; Vala, Martin (referee) ; Salyk, Ota (advisor)
Tématem této práce je počítačové modelování organického elektrochemického tranzistoru (OECT). Pro vytvoření modelu bylo třeba vypočítat rozložení elektrického pole a koncentrace iontů elektrolytu. Výpočet byl proveden numericky pomocí metody konečných prvků. Bylo vypočítáno rozložení elektrického potenciálu na povrchu kanálu OECT, dále byly vypočítány změny vodivosti a výstupní proud OECT. Výpočty byly provedeny na osobním počítači pomocí komerčního softwaru COMSOL Multiphysics. Kvůli nedostatečnému výpočetnímu výkonu musel být model rozdělen na části a drasticky zjednodušen. Prezentované výsledky se liší od literatury, protože se nepodařilo správně modelovat saturaci tranzistoru. Odchylky od reálného chování OECT jsou pravděpodobně způsobeny zjednodušením modelu.
|
|
|
Magnetic drive
Aubrecht, Ondřej ; Pokorný, Michal (referee) ; Raida, Zbyněk (advisor)
In the bachelor thesis, selected types of magnetic motors are analyzed and mutually compared. For each motor, a short description is given and critical evaluation of its properties is provided. In the next part of the project, all the magnetic motors are mutually compared and a suitable type of the motor for the computer simulation is chosen. The simulations are performed in programs COMSOL Multiphysics and program Femm. In the last part of the project, simulations are checked on the real prototype of magnetic motor.
|
guest ::
