|
|
Design of a current feedback operational amplifier
Kšica, Radim ; Fujcik, Lukáš (referee) ; Bečvář, Daniel (advisor)
This Master`s thesis deals with properties of current feedback operational amplifier. The main goal of this work is creation design process of current feedback operational amplifier by using CMOS technology AMIS 0,7 µm. Next goal of this work is attestation of funciton our design process. Last goal is creation the datasheet of our amplifier.
|
|
|
New solutions of converters for measurement of current-mode filters
Štork, Petr ; Kubánek, David (referee) ; Jeřábek, Jan (advisor)
This bachelor’s thesis describes some new solutions of differential converters that convert voltage to current and vice versa. Such converters are necessary for measurement of frequency filters in a current mode due to absence of instruments able to mesure signals with current as signal carrier. The goal is to design such converters that should influence gauged frequency properties in a current mode as little as possible. Converters will consist of operative amplifiers with current feedback. Converters designed this way are tested using simulations from PSpice programme, where particularly wideness of band of individual solutions is tested. Simulated solutions that are the most suitable ones are practicably re-enacted and gauged. These resuls of measurement and simulations are compared.
|
|
|
Application possibilities of LNVGA programmable amplifier
Sobotka, Josef ; Hanák, Pavel (referee) ; Jeřábek, Jan (advisor)
This thesis deals with the theoretical description of the qualitative characteristics and parameters of some modern active elements, also discusses the theory of signal flow graphs at the level applicable for the following frequency filter design methods. The thesis is also generally discussed the issue with the circuit simulator PSpice modeling theory and voltage amplifiers on the basic 6-levels. The practical part of the work is divided into two parts. The first practical part is dedicated to design four levels of simulation model of components LNVGA element. The second practical part contains detailed theoretical proposals for three circuit structures implementing the frequency filters 2nd order (based on the basic structure of the OTA-C) using signal flow graphs with configuration options of Q and fm based on the parameters of active elements in the peripheral structure and their verification with prepared LNVGA model layers.
|
|
|
VFA and CFA comparison
Vystrčil, Marek ; Hubálek, Jaromír (referee) ; Stehlík, Jiří (advisor)
This bachelor's thesis is focused on comparison of operational amplifiers structures with voltage (VFA) and current (CFA) feedback. In the theoretical part there is an analysis properties of operational amplifiers. Attention is paid to advantages of particular amplifiers in concrete networks. The practical part contains the simulations of those networks with an aim to assess characteristic properties and a difference between applied circuits. I used the operational amplifier µA741 for the simulation of the structure VFA. I used the amplifier AD8011 for the simulation with current feedback. I added the theoretical and practical differences between comparative structures.
|
|
|
Digitally controlled analog function blocks and systems
Brich, Tomáš ; Brzobohatý, Jaromír (advisor)
Goal of this doctoral thesis is to focus to understand of behavior of working of basic electronics circuits and to appoint which parameters of these circuits is possible to control using external digital system. Further the examples of some digitally controlled analog circuits are present and the analysis of these circuits is achieved. Some of these blocks are realized and the results of that’s measuring is presented.
|
|
|
Application of modern active blocks in harmonic oscillators
Votýpka, František ; Kubánek, David (referee) ; Slezák, Josef (advisor)
This work deals with using modern active functional blocks in electronic circuits. These blocks have better features than classical operational amplifiers and are characterized especially by working in current mode. Therefore these blocks can be used in higher frequencies. Using those blocks it is possible to design e.g. electronically variable-frequency filters of types low-pass filter, high-pass filter, band-pass filter, etc. Then it is also possible to easily realize electronically variable-frequency oscillators. This work is focused on some of these blocks, their basic characteristics and principles. Also three oscillators with current conveyors of second generation are designed. Its made simulation, sensitivity and tolerance analysis and magnitude stabilization. Everything is performed in OrCAD PSpice program. These made oscillators are electronic tunable in the band frequency ones of MHz.
|
|
|
Controlled analog frequency filters
Martinek, Pavel ; Koton, Jaroslav (referee) ; Minarčík, Martin (advisor)
In this bachelor’s thesis are described elements frequency filters, especially OTA amplifier, current and voltage conveyor. There're presented possibilities of control frequency-selection filters and components to control, analog multipliers, DA converters, controlled amplifiers and digitally controlled potentiometers. There are discussed some circuits of controlled filters and their possibilities of independent control of parameters f0, Q. Frequency characteristics for mentioned filters are verified simulator programme. The circuits are modified to other type filter and again frequency charakterestics are verified simulator programme PsPice.
|
|
|
New solutions of converters for measurement of current-mode filters
Štork, Petr ; Kubánek, David (referee) ; Jeřábek, Jan (advisor)
This bachelor’s thesis describes some new solutions of differential converters that convert voltage to current and vice versa. Such converters are necessary for measurement of frequency filters in a current mode due to absence of instruments able to mesure signals with current as signal carrier. The goal is to design such converters that should influence gauged frequency properties in a current mode as little as possible. Converters will consist of operative amplifiers with current feedback. Converters designed this way are tested using simulations from PSpice programme, where particularly wideness of band of individual solutions is tested. Simulated solutions that are the most suitable ones are practicably re-enacted and gauged. These resuls of measurement and simulations are compared.
|
|
|
Digitally controlled analog function blocks and systems
Brich, Tomáš ; Brzobohatý, Jaromír (advisor)
Goal of this doctoral thesis is to focus to understand of behavior of working of basic electronics circuits and to appoint which parameters of these circuits is possible to control using external digital system. Further the examples of some digitally controlled analog circuits are present and the analysis of these circuits is achieved. Some of these blocks are realized and the results of that’s measuring is presented.
|
|
|
Controlled analog frequency filters
Martinek, Pavel ; Koton, Jaroslav (referee) ; Minarčík, Martin (advisor)
In this bachelor’s thesis are described elements frequency filters, especially OTA amplifier, current and voltage conveyor. There're presented possibilities of control frequency-selection filters and components to control, analog multipliers, DA converters, controlled amplifiers and digitally controlled potentiometers. There are discussed some circuits of controlled filters and their possibilities of independent control of parameters f0, Q. Frequency characteristics for mentioned filters are verified simulator programme. The circuits are modified to other type filter and again frequency charakterestics are verified simulator programme PsPice.
|
guest ::
