|
|
Route design optimization
Guza, Matej ; Sabadáš, Petr (referee) ; Kosňovský, Michal (advisor)
The aim of the bachelor thesis is to find a suitable solution for the part of the road I/73 (section Žebětín-Bystrc) and related objects to eliminate the interference to the natural monument Pekárna. This work is looking for the most effective route alignment that respects as much as possible the territorial conditions, the surrounding buildings, the design parameters of the future road, the protection zones of utility networks and the traffic corridor according to the ZUR. The main result is a specific proposal of the route alignment and a description of the individual problems that the solution eliminates.
|
|
|
Exotarium ZOO Brno
Kučera, Jiljí ; Wittmann, Maxmilian (referee) ; Šindlar, Jiljí (advisor)
The topic of the bachelor thesis is the design of a pavilion for the Australia - New Guinea exhibition in Brno Zoo. The building serves mainly as an exposition and home for exotic species of birds, small mammals and fish. The building should meet all the conditions of buildings for the public, working conditions for employees and animal welfare. The area under consideration is located in the premises of the Brno Zoo, in the northern part of the district of Bystrc. The construction site is located roughly in the middle of the zoo at the crossroads between the Tropical Pavilion and the African Village. The relatively sloping, irregular plot is accessible from the north and east sides by a campus road. The kangaroo enclosure is directly adjacent to the west side, while the bison and camel enclosures are located to the north, across the road. The resulting design consists of a two-storey building that follows the contour line of the site. It is a building composed of two regular masses of rectangular plan. The upper smaller mass is superimposed on the lower larger mass. The pavilion includes indoor and outdoor aviaries, terrariums, aquariums, staff facilities, animal facilities and food preparation. The facade of the Exotarium imitates the red rock typical of Australia. It is made up of an ETICS system to which a moulded polystyrene layer and a painted surface will be added. An extensive green roof with aviaries is proposed on the main building. The design includes a small plaza to provide shade for visitors. Two buildings are proposed within the square - refreshments and public toilets. The bachelor thesis is based on documents in the form of assignment, dwg drawing of the cadastral situation and architectural study from the course BGA036 - Architectural Atelier 5.
|
|
|
3D model of st. Johns' church in Brno-Bystrc
Vilčeková, Lýdia ; Suchánek, Milan (referee) ; Bartoněk, Dalibor (advisor)
The diploma thesis is about the measuring and creating the 3D model of the Church of St. John the Baptist and sv. John the Apostle in Brno – Bystrc. At the beginning the thesis specifies the location of the object and informs about its history. Then it focuses on the measuring of the object. After testing the accuracy of the detailed points, it brings the 3D model of the church in the program AutoCAD, v. 2018.
|
|
|
Port Terminal Centre Brno
Liška, Zdeněk ; Teplý, Vladimír (referee) ; Odvárka, Antonín (advisor) ; Petříček, Tomáš (advisor)
The theme of this project was to create a building which would be used for recreational and sporting purposes at The Brno Reservoir . The proposed building includes following parts: facilities for employees of the Public Transport of City Brno, marinas, information center for selling tickets, restaurant and fast food, and bathrooms for visitors. The plot is defined by the existing car park, access road to the car park, boat tickets shop and existing building of the yacht club. The organic shape of the building cooperates with the surrounding terrain of the parcel. The building is on the east side completely set in gently sloping terrain. Angled surfaces of the glass facades on the southwest side comply with the promontory shape of the reservoir. The Individual components abstract the elements of a cruise ship. The object has longitudinal character. Bevelled wooden surfaces of the roof symbolize boarding pier to a boat. People can freely promenade here, and enjoy the view to the lake and its surroundings. There is a big view opening to the exterior part of the restaurant on the boarding slant at the northern side. In winter, this areas can serve to children as bobsled. The pavement form the street Přístavní extends to the accessible part of the roof. The entrances are situated to the west. Supplying for the restaurant will be provided by delivering supplies along the street Přístavní. The building is divided into two functional entities - restaurant and port terminal. The interior is based on the concept of Plan Libre. The restaurant smoothly changes in a waiting area for passengers. There is a staircase located in the middle of this open space, which connects the first floor to the second floor above. There is also a staircase that leads to the basement. Immobile or less fit people can reach each of the floors by elevator, which is also located in this central area. From the second floor it is possible to access to the roof
|
|
|
Traffic solution in the area Kníničská - Bystrcká
Strmiska, Tomáš ; Novák, Jan (referee) ; Holcner, Petr (advisor)
The target of this diploma thesis is to create and compare variants dealing with a complicated traffic situation in Brno-Komín. Two dynamic responsive signal-controlled junctions situated in close proximity constitute the researched area. The situation is complicated by the presence of a streetcar crossing. Conducted traffic surveys represent the first part of the thesis. Data supplied by a junction's administrator are then added to the survey results. All acquired data serve as background information for designing possible solutions. Most of the work is connected with a capacity analysis which is done according to valid regulations. A microscopic simulation is implemented to examine impacts of selected concepts. The presented concepts are then evaluated financially. Finally, an optimal variant for implementation is suggested.
|
|
| |
|
|
3D model of st. Johns' church in Brno-Bystrc
Vilčeková, Lýdia ; Suchánek, Milan (referee) ; Bartoněk, Dalibor (advisor)
The diploma thesis is about the measuring and creating the 3D model of the Church of St. John the Baptist and sv. John the Apostle in Brno – Bystrc. At the beginning the thesis specifies the location of the object and informs about its history. Then it focuses on the measuring of the object. After testing the accuracy of the detailed points, it brings the 3D model of the church in the program AutoCAD, v. 2018.
|
|
|
Traffic solution in the area Kníničská - Bystrcká
Strmiska, Tomáš ; Novák, Jan (referee) ; Holcner, Petr (advisor)
The target of this diploma thesis is to create and compare variants dealing with a complicated traffic situation in Brno-Komín. Two dynamic responsive signal-controlled junctions situated in close proximity constitute the researched area. The situation is complicated by the presence of a streetcar crossing. Conducted traffic surveys represent the first part of the thesis. Data supplied by a junction's administrator are then added to the survey results. All acquired data serve as background information for designing possible solutions. Most of the work is connected with a capacity analysis which is done according to valid regulations. A microscopic simulation is implemented to examine impacts of selected concepts. The presented concepts are then evaluated financially. Finally, an optimal variant for implementation is suggested.
|
|
|
Port Terminal Centre Brno
Liška, Zdeněk ; Teplý, Vladimír (referee) ; Odvárka, Antonín (advisor) ; Petříček, Tomáš (advisor)
The theme of this project was to create a building which would be used for recreational and sporting purposes at The Brno Reservoir . The proposed building includes following parts: facilities for employees of the Public Transport of City Brno, marinas, information center for selling tickets, restaurant and fast food, and bathrooms for visitors. The plot is defined by the existing car park, access road to the car park, boat tickets shop and existing building of the yacht club. The organic shape of the building cooperates with the surrounding terrain of the parcel. The building is on the east side completely set in gently sloping terrain. Angled surfaces of the glass facades on the southwest side comply with the promontory shape of the reservoir. The Individual components abstract the elements of a cruise ship. The object has longitudinal character. Bevelled wooden surfaces of the roof symbolize boarding pier to a boat. People can freely promenade here, and enjoy the view to the lake and its surroundings. There is a big view opening to the exterior part of the restaurant on the boarding slant at the northern side. In winter, this areas can serve to children as bobsled. The pavement form the street Přístavní extends to the accessible part of the roof. The entrances are situated to the west. Supplying for the restaurant will be provided by delivering supplies along the street Přístavní. The building is divided into two functional entities - restaurant and port terminal. The interior is based on the concept of Plan Libre. The restaurant smoothly changes in a waiting area for passengers. There is a staircase located in the middle of this open space, which connects the first floor to the second floor above. There is also a staircase that leads to the basement. Immobile or less fit people can reach each of the floors by elevator, which is also located in this central area. From the second floor it is possible to access to the roof
|
guest ::
