|
|
Office building
Rousková, Radka ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
The aim of this master's thesis is to design a low-energy office building in Lanškroun. There are three parts, documentation for building permission, a concept of HVAC documentation and multi-criteria assessment in SBToolCZ. The SBToolCZ evaluates of 39 standards, which are divided into four groups – environmental, social criteria, economics and management and location. The proposed building is two-storey, the ground floor is partly below ground level and is designed of reinforced concrete. The first floor is made of CLT panels. The building has a green roof. A green facade will be made on three sides of the ground floor. On the ground floor, there are reception, a meeting room, offices, a technical and storage facilities. On the first floor, there are offices with facilities for employees. Energy for heating and domestic hot water is provided by a condensing gas boiler. Ventilation in the building is provided by an air conditioning unit with heat recovery. There is an underground tank for collecting rainwater that is used for watering the garden and the green facade. The thesis is processed mainly in the software AutoCAD, MS Word, MS Excel and DEKSOFT.
|
|
| |
|
|
Construction technological project of administration building Gaceta in Prague
Jekielek, Marek ; Pražáková, Jana (referee) ; Diaz, Yvetta (advisor)
The objective of this thesis is the technological project of the structural construction of administrative building. It includes technological standards for reinforced concrete ceiling and for face layer of ventilated facade, the project of site construction, detailed structural, financial and time schedules of building object, controlling plans and test plans of the reinforced concrete skeleton and for face layer of ventilated facade from face brick, plan of main mechanical assemblies and costing of budget for structural.
|
|
|
Technological Solution of a Gross Superstructure of the Apartment Building in Brno
Drozd, Michal ; Hejl, Martin (referee) ; Mohapl, Martin (advisor)
This bachelor´s thesis is focused on the construction technological project of a gross superstructure of the apartment building in Brno. It is a four-storey building made of bricks with cast-in-place floor structures. The building is roofed with a timber roof truss. The thesis includes a technical report, bill of quantities, technological methods of construction, technical report of a site equipment, machine draft report, inspection and test plan, work safety and finally comparing of different ways of concreting.
|
|
| |
|
| |
|
|
Building survey and evaluating the state construction
Nguyen, Martin ; Komárková, Tereza (referee) ; Heřmánková, Věra (advisor)
This diploma thesis deal with the building survey and evaluating the state of existing constructions. In theoretical part are described the types of civil engineering surveys and diagnostic methods for conducting a survey of reinforced concrete structures. The practical part deal with describes the structural and technical survey of the production hall in the industrial area Fatra Napajedla, evaluating the strength of concrete on the existing structure through donations cores and verification of compliance with the reinforcement according to project documentation. The last part is focused on a static assessment of selected supporting elements of the structure.
|
|
|
Static analysis of reinforced concrete roofing of platform
Popovič, Tomáš ; Strnad, Jiří (referee) ; Zich, Miloš (advisor)
The thesis deals with the static solution of reinforced concrete roofing of bus platform. It is a monolithic reinforced concrete frame structure, which is consisting of circular pillar and girder. The girder has the general shape. The board is double-sided embedded into girder. The loads acting on the construction are transmitted to the foundation soil using reinforced concrete foundation blocks. The content of this thesis is based on the dimensioning of individual elements of the support structure according to ČSN EN 1992-1-1. These elements are dimensioned for the ultimate limit state. The main outputs of this static calculation are drawings of shape and drawings of reinforcement.
|
|
|
Apartment building in Znojmo
Trčková, Michaela ; Žajdlík, Tomáš (referee) ; Šuhajdová, Eva (advisor)
The aim of this bachelor thesis is a project documentation of the construction of an apartment building in Znojmo. The designed building is three-storey with partial basement. It has approximately rectangular floor plan of 40 x 12.5 m. The structural system of the building is designed from monolithic reinforced concrete in the permanent thermal insulation formwork Velox. The last floor is covered with a flat roof. The structure offers 12 dwellings. There is also a parking lot and large garden that belong to the flat owners.
|
|
|
Concrete flat slab supported by columns
Macháček, Jan ; Strnad, Jiří (referee) ; Perla, Jan (advisor)
The aim of this bachelor’s thesis is a structural design of a reinforced concrete point-supported slab for the second floor construction of a hospital. Software RFEM was used for modeling of internal forces, the results were verified by equivalent frame method and moment coefficient method. According to the RFEM results a tension reinforcement and slab shear reinforcement were designed. The deflection was manually calculated. Afterwards, a reinforcement drawing was made. The calculations correspond with ČSN EN 1992-1-1 a ČSN 73 1201.
|
guest ::
