|
|
Preparation of sample cross-sections and analysis by SIMS
Karlovský, Juraj ; Pechal, Radim (referee) ; Bábor, Petr (advisor)
This thesis studies possible methods of semiconductor sample measurement by SIMS, with emphasis on testing different measurement parameters and sample preparation. Part of this master thesis deals with the design of a modified sample holder compatible with the used ToF-SIMS$^{5}$ instrument, IONTOF company, which is capable of tilting the sample by defined angle. This holder enables sample preparation in the main chamber of the instrument without the need of transferring the sample between instruments, which limits the probability of sample contamination. This sample holder was tested by ion machining of TIGBT sample edge and by imaging of a crater edge, created in previous measurement. Edge termination structures prepared by different techniques were measured on the TIGBT samples. Further measurements with the goal of optimizing the depth resolution for thin layers were done on Molybdenum-Silicon-multilayer X-Ray Mirror. Part of the measurements was focused on comparing depth profiles measured at low temperatures. For these measurements the samples with Indium multilayers in GaN substrate were used.
|
|
|
The building, Přístavní street, Praha 7
Degr, Luboš ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The subject of this Diploma Thesis is newly built polyfunctional building in the Prague – Holešovice. Building land is slightly sloping. The building will be followed by the surrounding buildings. The building consists of seven floors. The floor underground technical spaces and collective garages. On the ground floor are two commercial spaces and reception. In the second to fifth floor are office space. The top floor is a penthouse with terraces. The building is designed as a monolithic reinforced concrete skeleton accompanied by a facade wall and the wall forming the core. The core consists of a elevator and a staircase. Floor slabs is continuous reinforced concrete slab with capitals. The façade of the building is divided by pilasters, stone cladding. Root at the penthouse is composed of a terrace with vegetation. Ground floor consists of shop windows with sun screens. All designs are in accordance to the valid ČSN code.
|
|
|
New building family house in Třebíč
Berková, Martina ; Ing.Radek Sedlák (referee) ; Benešová, Romana (advisor)
The subject of this Bachelor Thesis is a newly constructed family house located in Třebíč. The house was built using Porotherm brick – type blocks and Miako hollow ceiling bricks. The roof is of an gable design. The house has two overground floors – the second floor takes of a livable attic. The land is flat. All construction was done according to valid CSN code.
|
|
|
Residential house
Jakoubě, Jiří ; Bolkovec, Martin (referee) ; Donaťáková, Dagmar (advisor)
The master’s thesis dealt with newly built residential house. The building is located in the Liberec region in the cadastral land parcel number 42/1 in the cadastral area Liberec-Rochlice. Address of the building is 227 Vratislavická Liberec-Rochlice 460 59th Built up area is 655 m2. The new building is located on sloping ground to the south. The building is located on the still undeveloped parcel near residential homes and nursing home. The building is partially basement with four floors. In the basement is the technical support for building, storage and parking facilities. The first two floors are commercial applications for administrative operations. In the third and fourth floor apartments are located. In total there are five residential units for a total of 17 persons. The supporting structure of the building is a monolithic reinforced concrete deck Beon C 25/30 B and reinforcement 500th The building is based on the footings of plain concrete C 16/20, and the bases of concrete and plate C 25/30 and the reinforcement B 500th Outer and inner walls are lined walls in the system Porotherm. The roof is designed as a flat. Walk-on part is designed as extensive or as a patio with concrete paving. Nepochúzná part has a stabilizing layer of gravel.
|
|
|
Family house
Pánek, Martin ; Klimeš,, Vladimír (referee) ; Klimešová, Jarmila (advisor)
The main concern of this thesis is to design three storey family house. The house is divided into the main living area to the garage and basement areas and a part of an establishment. There is 2 floors in the house and there is partially a basement. The house has a flat roof.
|
|
|
Family House
Havlíček, Jiří ; Komínková, Kateřina (referee) ; Lavický, Miloš (advisor)
The bachelor project Family house is compiled in a from of project documentation which comprises all the requisites required by current regulations. The designed house is placed on the sites numbered 199/81 in Sezimovo Ústí
|
|
|
Family house with surgeries
Kubát, Marek ; Novotný, Michal (referee) ; Drobeček, David (advisor)
The bachelolor project assignment Family house with offices of doctor is complited in a from of project documentation whitch comprises all the requisites required by current regulations. The disigned house in placed on the sites mumbered 216/2 in village Tvarožná.
|
|
|
BUNKER KUNST
Bělica, Ondřej ; Jetelová, Magdaléna (referee) ; Ambrůz, Jan (advisor)
Bunker Kunst is an experimental and co-working platform, exploring potential and contemporary role of formal borders, post-military landscape and Czechoslovakian fotress built before 2WW. The point is a resuscitation of post-war space, where tens thousand of concrete mementos are still present. Deadly border line is becoming an environment of freedom. The project consist of theoretical, studio and site-specific works and happenings. More than 40 volunteers, students and specialists have been participating. Live long freedom!
|
|
|
Family house
Staníková, Radka ; Majsniar, Michal (referee) ; Škramlik, Jan (advisor)
The subject of this diploma work is the new building of a family house at Boží Dar town, that is situated in the mountain resort. The family house has a cellar, it is two storied with an attic apartment. The building is devided into three units . The first unit is found on the first floor and is designed as an apartment. The other units are situated in the attic and are designed for a short-term or long-term renting. The house is designed of cut bricks with a ceramic ceiling construction. The perimeter wall is thermally insulated with a contact insulating system and partly covered with a stony facing. There is a saddle-shaped roof on the house. The building site is sloping north-east. All constructions are in accordance with the valid regulations and ČSN standards.
|
|
|
Pension,riding-school
Latochová, Marcela ; Spáčilová, Jitka (referee) ; Spáčil, Miroslav (advisor)
Diploma thesis Pension - riding school is processed in the form of project documentation containing all requirements according to applicable regulations. The proposed facility is located on a parcel file with parc. no. 583/1, 584/1 and 16/1, in the village Vávrovice, which falls under the statutory town of Opava. It is a new basement house, which belongs to the civil, specifically in OB3 terms of fire safety. The building has a cross shape with a central raised portion compared with the lateral sides. The central part has 3 floors and the ground, which can later be used as an attic, two side sections have only 1.NP and attic. The shape of the roof ridge. The building is made of aerated concrete blocks YTONG and fully insulated.
|
guest ::
