|
|
Surface pre-treatment of structural aluminum alloys for bonded joints
Pikner, Jan ; Doskočil, Leoš (referee) ; Wasserbauer, Jaromír (advisor)
This thesis deals with pre-treatment of surface of aluminium alloys. The theoretical part focuses on the properties of aluminium and its alloys, on methods of surface treatment and the possibilities of quality assessment of pre-treated surface. The experimental part deals with finding of a proper method of pre-treatment. The quality of surface pre-treatment is assessed by observation by SEM with EDS and by single lap shear tests of adhesive joints. According to evaluated results, the optimalised methods are qualitatively and financially compared with the commercial method.
|
|
|
Preparation and evaluation of fluoride conversion coating created on AZ31 wrought magnesium alloy
Matějka, Lukáš ; Wasserbauer, Jaromír (referee) ; Fintová, Stanislava (advisor)
The aim of this work is optimization of preparation parameters of fluoride conversion coating on the wrought magnesium alloy AZ31 in Na[BF4] melt. The monitored factors for determining quality of the prepared coatings are homogeneity of the coating surface on ground and polished samples of magnesium alloy, mechanical properties of the coating (adhesion and hardness) and the coating thickness. The main parameter was the change in these properties at different exposition times of the material to the salt melt. Coating surfaces were documented on an inverted light microscope with the addition of images representative samples using SEM. The coating thickness was documented with inverted light microscope using a polarization filter. The chemical composition was determined on three representative samples using an energy-dispersive X-ray spectrometer. The mechanical properties of the coatings were determined by scratch test on REVETEST Scratch Testing System with detector of acoustic emissions. The resulting scratches were documented on a light microscope. It was proved that polished samples exhibit superior coating in respect with ground samples, wherein the coating did not fill the trench after the finish treatment (grinding). Constant chemical composition has been demonstrated in all the coatings. Polished sample after 2 hours of exposure in the Na [BF 4] melt exhibits best mechanical properties. The obtained data are of practical importance in the use of the alloy AZ31 in various fields of industry, medicine and other research.
|
|
|
Heat hardening of Ni-P based coatings prepared on wrought magnesium alloys
Kotland, Vojtěch ; Březina, Matěj (referee) ; Wasserbauer, Jaromír (advisor)
This bachelor’s thesis is focused to hardening of nickel-phosphorus coatings on magnesium alloys. In the theoretical part are listed current knowledge about magnesium alloys and electroless deposition of Ni-P coatings for which is also stated mechanism and function of components contained in the bath. Theoretical part is ended by review aimed to the research in areas of chemical coating. Experimental part describes individual steps of pretreatment on magnesium alloy AZ31 and then planting of Ni-P coating on thus prepared alloy. In the next part is stated range of used hardening temperatures and mechanical repercussion to that. Composition and morphology of deposited coating and magnesium alloy were studied using scanning electron microscopy.
|
|
|
Ni-P based coatings preparation on wrought magnesium alloys
Buchtík, Martin ; Fintová, Stanislava (referee) ; Wasserbauer, Jaromír (advisor)
The aim of this diploma thesis was summary of all steps and knowledge necessary to deposition of quality Ni-P coatings deposited on wrought magnesium alloys AZ31 and AZ61. There is the treatise about wrought magnesium alloys AZ31 and AZ61. Thesis includes its phase composition in the theoretical part. There are given its possible processing methods too. Next, there is desribed the mechanism of deposition of Ni-P coatings, components required to electroless deposition and factors affecting the quality and properties of these coatings. The theoretical part is ended by serie of reviews. Authors of these reviews deal with pretreatment of substrates, preparation, characterization and measuring of mechanical, structure and corrosion properties of deposited coatings. The optimalization of pretreatment, parametres and composition of nickel bath suitable for magnesium alloys is described in experimental part. The microstructure, present interlayer between substrate and Ni-P coating and chemical composition of deposited coatings was observed and measured by optical and electron microscopy. The mechanical characterization of Ni-P coatings was performed by microhardness tester.
|
|
|
Mechanical Properties of Microstructural Components of Inorganic Materials
Wasserbauer, Jaromír ; Palou, Martin (referee) ; Drábik,, Milan (referee) ; Havlica, Jaromír (advisor)
Disertační práce se zabývá studiem strukturních a mechanických vlastností anorganických materiálů. Cílem je nalezení jednotlivých fází ve zkoumaném materiálu a hlavně lokalizace (mechanicky) nejslabšího místa, jeho ovlivnění a následně výroba materiálu o lepších mechanických vlastnostech. Z důvodu velkého množství použitých metod je základní teorie vložena vždy na začátku příslušné kapitoly. Taktéž z důvodu značného množství výsledků jsou na konci kapitol uvedeny dílčí závěry. Práce je rozdělena na tři části, kdy první se zabývá seznámením s možnostmi modelování mikro-mechanických vlastností a provedením experimentů umožňujících posouzení rozsahu platnosti některého modelu. V druhé části je provedeno shrnutí současných možností indentačních zkoušek pro měření mechanických vlastností strukturních složek betonu a praktické zvládnutí metodiky vhodné k užití pro výzkum materiálů zkoumaných domovským pracovištěm. V třetí části je navržena metoda identifikace nejslabších článků struktury anorganických pojiv a její ověření na konkrétním materiálu zkoumaném na domovském pracovišti. V této dizertační práci jsou použity tyto metody: kalorimetrie, ultrazvukové testování, jednoosá pevnost v tlaku, nanoindentace, korelativní mikroskopie a rastrovací elektronová mikroskopie s energiově disperzním spektrometrem. Dílčími výsledky jsou kompletní charakterizace cementových materiálů, upřesnění stávajících poznatků a nalezení optimálního postupu pro charakterizaci. Hlavním výsledkem je inovativní přístup vedoucí k pozitivnímu ovlivnění materiálu.
|
|
| |
|
|
Electrochemical characteristics of AZ31 and AZ61 magnesium alloys in Hanks‘ solutions
Minda, Jozef ; Wasserbauer, Jaromír (referee) ; Tkacz, Jakub (advisor)
This thesis deals with the characterization of electrochemical corrosion properties of magnesium alloys as promising materials for biomedical applications. The wrought alloys AZ31 and AZ61 were used and exposed to corrosive environments of Hanks solutions (SBF) to simulate environmental conditions in living organisms. For the evaluation of the surfaces was used scanning electron microscopy (SEM) with elemental analysis measured by energy-dispersive spectroscopy (EDS). Short-term (5 min) and long-term (72 h) corrosion tests were conducted in order to optimize the measurement methodology and obtain corrosion parameters - especially corrosion potential (Ekor), corrosion current density (ikor) and polarisation resistance (RP). To evaluation of the short-term tests were by potentiodynamic tests, namely the linear polarization (LP) test. Long-term tests were measured by electrochemical impedance spectroscopy (EIS). Effects of the composition of the alloys (AZ31 and AZ61), surface treatment (grinding and polishing) and the composition of the solution (SBF without Ca, Mg, and with Ca, Mg) were compared. Complex corrosion behaviour in time was characterized and corrosion mechanisms were discussed.
|
|
|
Local tests of mechanical properties of materials
Wasserbauer, Jaromír ; Šoukal, František (referee) ; Zmrzlý, Martin (advisor)
This thesis deals with measurement of hardness and microhardness in relation to structure of homogeneous and heterogeneous materials. In the introduction basic theoretical background is commented, i.e. definitions, terminology, principles of measuring techniques for estimation of hardness, microhardness, tensile strength, compressive strength and bending strength. Follows a brief review of present research results focused on use of described principles in materials engineering. Then the experimental equipment and sample preparation is described. The crucial part of the thesis is summary of achieved results of original measurement and discussion of their relations to each other. Finally, the groundbreaking estimation is described, showing the correlation of chemical composition gradient and mechanical properties in interfacial zone of geopolymeric material.
|
|
|
Protection of magneisum alloys
Ruttkayová, Veronika ; Wasserbauer, Jaromír (referee) ; Zmrzlý, Martin (advisor)
The aim of this bachelor thesis is to characterize the mechanical properties of protective coatings on magnesium alloy AZ91. In the introductory there are summarized the findings of magnesium, magnesium alloys, corrosion and protection against it. Important properties such as adhesion and hardness were tested by standardized tests. The result can be used to determine application fields of these coated alloys in practice.
|
|
|
Coatings on aluminum alloys
Slouková, Karolína ; Wasserbauer, Jaromír (referee) ; Zmrzlý, Martin (advisor)
Aim of this bachelor thesis is a summary of results of research of conversion coatings on aluminum alloys and coatings based on examination of cerium using potentiodynamic measurements. In the theoretical section there are described basic properties of aluminum and its alloys. Then corrosion of aluminum and its alloys is discussed and an overview of the most common types of corrosion affecting these alloys is presented. A brief overview of aluminum alloys notation follows. Next section is devoted to concepts that are already associated with potentiodynamic measurements. There are described electrochemical cells, effects of current density, polarization and passivation. The following summary of research articles deal with current research of aluminum alloys and coatings formed on them. Discussed are especially research results on coatings based on cerium. The experimental part focuses on the effect of hydrogen peroxide concentration on coatings based on cerium, and the influence of the surface roughness of the samples on the adhesion of these coatings. Analyses were performed using electro microscopy and potentiodynamic measurements.
|
guest ::
