|
|
Bioimpedance signal processing
Valíčková, Vladimíra ; Vondra, Vlastimil (referee) ; Soukup, Ladislav (advisor)
Theoretical part of this Bachelor thesis deals with properties measurement and use of bioim-pedance signal for medical diagnostics. The practical part deals with detection of important points in derivate bioimpedance signal that may be further used in various medical applicati-ons. This work compares three detection methods. The best results were achieved by a de-tection with fixed interval there were excluded only 1,09 % values. Very similar results had detector dependent on constant bioimpedance. Here was excreted 1.18 % of detections. Algo-rithms that are dependent on length of RR interval perform worse. Furthermore, there is cal-culated the Pulse wave velocity in six parts of the human body in a horizontal and tilt patient position. In the tilt position were the pulse wave velocity about 38.59 % faster than in hori-zontal.
|
|
|
Processing of a continual blood pressure signal
Svobodová, Ivana ; Soukup, Ladislav (referee) ; Vondra, Vlastimil (advisor)
Bachelor thesis contains a general description of the blood pressure phenomenon and its importance and also deals with diseases, such as hypotension and hypertension. The work also includes a literature review of blood pressure measuring methods. Closely are discussed the non-invasive methods. The result of the work is also a unique program designed in Matlab, which is developed for signal processing of continuous blood pressure measurement for detection of SBP and DBP and MAP, pulse after pulse. To verify the functionality of the program, the further implementation was carried out in GUI. In conclusion, the obtained data are beeing analyzed statistically.
|
|
|
Processing of heart sounds signals
Němcová, Simona ; Matějková, Magdaléna (referee) ; Vondra, Vlastimil (advisor)
This bachelor thesis is focused on the heart sound signal. It describes the principles of hear sound formation, measurement methods and especially the analysis of the measured phonocardiography signal. In the practical part of this thesis, the algorithm for detecting the first and the second heart sounds is designed by using MATLAB software. Its principle is realized in finding maximum or center of gravity in the filtered phonocardiography signal.
|
|
|
Thermal comfort and its estimation
Žáková, Monika ; Vondra, Vlastimil (referee) ; Nováková, Zuzana (advisor)
This paper summarizes the problems of human thermoregulation and its measurement, with a focus on the method of indirect calorimetry in resting conditions at different ambient temperatures and during physical activity. It also introduces the issue of human thermal comfort and the methodology of its monitoring using thermal manikin. It describes PowerCube Ergo (Ganshorn, Germany) and Cardiovit AT-104 (Schiller, Switzerland), the diagnostic devices used to spiro-ergometry measurements. It introduces the options to export data. The work proposes the protocol for measuring the thermoregulation of the small group of volunteers, which is realized by the practical part. According to the same protocol is monitored thermal comfort of the thermal manikin. In MATLAB is created the application, allowing clear analysis of measurement records. The data are evaluated and discussed.
|
|
|
Direct digital synthesizerfor microwave application
Dluhý, Vojtěch ; Vondra, Vlastimil (referee) ; Kasal, Miroslav (advisor)
The aim of this thesis is introduce readers to the basics of digital frequency synthesis and design of direct digital synthesizer with circuit AD9951 by Analog Devices. The device will be controlled from a PC via USB. The device works with internal oscillator, with the ability to connect an external frequency standard of 10 MHz. On input is frequency doubler with transistor. Outpu signal is filtered by low-pass filter and amplified by monolitic amplifier ERA-3+.
|
|
| |
|
|
Modulation signal source for microwave beacon
Belloň, Michal ; Vondra, Vlastimil (referee) ; Kasal, Miroslav (advisor)
This project is focused on construction of source of modulation signal for microwave beacon. The output signal is the same as signal, which is generated by PC software WSJT (Weak Signal by Joe Taylor) on PC sound card output. Signal on device output is modulated using by WSJT modulation and its specific JT4 mode. The device output has I and Q components of signal.
|
|
|
Properties of pulse wave velocity in human body during various excitations
Matejková, Magdaléna ; Halámek, Josef (referee) ; Vondra, Vlastimil (advisor)
The thesis is concerned with the analysis of measuring pulse wave velocity in human body with the aid of whole-body multichannel bioimpedance which was developed at ISI AS CR, v.v.i.. The evaluation of pulse wave velocity can provide us with important information about the state of vessel compliance which is one of the basic parameters informing on their physiological state. The examination of the state of vascular system is a very important part of early diagnostics because its pathological states are the main contributor to the rise of cardiovascular diseases and disease mortality. The thesis is concerned with the theoretical analysis together with the available methods of valuation of the state of vascular system that use measuring of pulse wave velocity. The main part of the thesis deals with the analysis of the whole-body multichannel bioimpedance measurement. The proposed and programmed protocol that summarizes and visualizes all obtained information is a part of this thesis. This is currently used as an output of the experimental measurement by this method. Data file for statistical processing contains the values of the pulse wave velocity of 35 healthy volunteers and subsequently the properties of pulse wave are assessed at various excitations.
|
|
|
Evaluation of cardiac output by bioimpedance method with patients with pacemaker
Soukup, Ladislav ; Cimbálník, Jan (referee) ; Vondra, Vlastimil (advisor)
This thesis deals with the possibility of using impedance cardiography for calculating cardiac output. Kubicek’s, Sramek‘s and Sramek-Bernstein‘s methods are discussed here. These methods were applied to a data set, obtained by measuring on subjects with implanted cardiostimulators. The subjects’ heart rate was being changed by the programing of cardiostimulators. Thanks to this procedure the measured data were not affected by artifacts, connected with the heart rate change caused by a body stress, or other influences. An influence of heart rate on a cardiac output value based on the statistical processing of the data set was studied.
|
|
|
Modelling of cardiac impedance signals
Matušek, Adam ; Vondra, Vlastimil (referee) ; Provazník, Ivo (advisor)
Tato diplomová práce se zabývá vytvořením modelu signálu impedančního měření srdce (ICG signál). Impedanční kardiografie podává informaci o změně srdečního objemu během srdečního cyklu. Modelování signálu předchází statistická analýza vzájemné pozice ICG signálu vzhledem k dalším mechanickým srdečním signálům. Konstrukce modelu vychází z reálných nasnímaných signálů. Konečný ICG model je začleněn do již existujícího modelu mechanických interakcí mezi srdcem a plícemi. Výsledkem je funkční model kardio-respiračních interakcí, který bude sloužit v dalších částech výzkumu laboratoře PRETA.
|
guest ::
RSS feed.