|
|
Current-Input Current-Output Active Circuit Elements and their Applications
Vávra, Jiří ; Sedláček, Jiří (referee) ; Maschke, Jan (referee) ; Biolek, Dalibor (advisor)
The thesis deals with definitions of new current- or mixed-mode circuit elements and their implementations and applications. Based on the analysis of the state-of-the-art, novel application circuits employing the above circuit elements are designed. For the purpose of the experimental verification, the active elements are implemented via commercial integrated circuits, and their applications are simulated via PSpice. The application circuits are focused on frequency filters, rectifiers, oscillators, and current-copy circuits. Selected applications are analyzed with respect on real influences, and measurements on circuit prototypes are also performed.
|
|
|
Partial Discharge in High Frequency Electronic Equipment
Havlíček, Tomáš ; Maschke, Jan (referee) ; Dřímal,, Jiří (referee) ; Boušek, Jaroslav (advisor)
The presented thesis is focused on knowledge extension in the area of partial discharge measurements and evaluation at frequencies higher than 1 kHz. The thesis includes the design and set up of the measuring workplace equipped for measuring partial discharges, including the methodology of the measuring and calibration procedures necessary for the achievement of reproducible results. Another part of the thesis deals with the technology of acoustical and electromagnetic sensors convenient for the diagnostics and localization of partial discharges in devices, that work at voltages above 500 V. Electrical circuits that enable data evaluation by using the signal from a sensor working on amplitude analysis principle were developed. For PD detection a PC controlled measuring device working on amplitude analysis principle had to be designed and realized. The possibilities of the workplace have been demonstrated in the process of development of the insulating systems for pulse transformers. Thesis results can significantly contribute to a higher quality of newly designed electronic devices and systems working at voltages above 500 V.
|
|
|
Planar Structures for High Frequency Band
Pulec, Jiří ; Pietriková, Alena (referee) ; Maschke, Jan (referee) ; Szendiuch, Ivan (advisor)
The present paper deals with the problematics of the design and technology of planar microelectronic structures for the hign frequency band. These structures were realised on the Department of Microelectronics and their properties were measured on the Department of Radioelectronics. The part of this work is also simulation of some microelectronic structures, where for these simulations the design and simulation tool Ansoft Designer and the FEM tool ANSYS was used. The attention is paid to the discrete devices (coils and capacitors) as well as to the more complex structures (frequency filters). The paper yields the new findings in the field of the design and technology of the discrete components as well as of the more complex systems, these findings can be used as the basis for another research of practical applications.
|
|
|
Partial Discharge in Electronic Equipments
Mammadov, Anar ; Maschke, Jan (referee) ; Dřímal,, Jiří (referee) ; Boušek, Jaroslav (advisor)
Tato disertační práce se věnuje studiu částečných výbojů (PD) způsobených poklesem spolehlivosti a životnosti elektronických zařízení a systémů. Diagnostika PD je dnes známá metoda pro vysoké napětí u vysoko-výkonných zařízení. V případě elektronických zařízení PD testování není ale běžně používáná metoda, přestože je zde také potenciál pro vysoké elektrické zatížení vzhledem k velmi krátké vzdálenosti. Tato práce je zaměřena na vyšetřování PD činnosti u elektronických zařízení. Bylo navrženo a provedeno pracoviště pro diagnostiku PD v elektronických zařízeních. Pracovní frekvence se pohybuje od několika stovek Hz až 100 kHz. Maximální amplituda PD testovaného napětí je vyšší než 10 kV. Navzdory jednoduché konstrukci toto zařízení přináší vysokou spolehlivost měření. Více než 300 PD testů bylo provedeno na různých elektronických zařízeních a elektronických součástí,např. na planárních transformátorech a elektronických komponentách používaných při vysoko-napěťových měničích
|
|
|
Novel Method to Evaluate Signals from Absolute Position Encoder
Dvořák, Vojtěch ; Husák, Miroslav (referee) ; Maschke, Jan (referee) ; Fujcik, Lukáš (advisor)
The thesis is focused on development and implementation of novel method to estimate position with absolute position encoder utilizing Vernier principle. The novel method was developed to ensure higher reliability of position estimation in applications where characteristics of position sensors are affected by environment or due to ageing of components in lifetime. In the first part of the thesis, an overview of common methods to evaluate signals of position encoder is provided together with analysis of their limits in case of drift of characteristics of position sensor itself. The novel method is derived and deeply analysed in the second part of the thesis and reference implementation into FPGA circuit is presented. The last part of the thesis summarizes tests conducted to verify functionality and properties of the novel method in real application.
|
|
|
Planar Structures for High Frequency Band
Pulec, Jiří ; Pietriková, Alena (referee) ; Maschke, Jan (referee) ; Szendiuch, Ivan (advisor)
The present paper deals with the problematics of the design and technology of planar microelectronic structures for the hign frequency band. These structures were realised on the Department of Microelectronics and their properties were measured on the Department of Radioelectronics. The part of this work is also simulation of some microelectronic structures, where for these simulations the design and simulation tool Ansoft Designer and the FEM tool ANSYS was used. The attention is paid to the discrete devices (coils and capacitors) as well as to the more complex structures (frequency filters). The paper yields the new findings in the field of the design and technology of the discrete components as well as of the more complex systems, these findings can be used as the basis for another research of practical applications.
|
|
|
Current-Input Current-Output Active Circuit Elements and their Applications
Vávra, Jiří ; Sedláček, Jiří (referee) ; Maschke, Jan (referee) ; Biolek, Dalibor (advisor)
The thesis deals with definitions of new current- or mixed-mode circuit elements and their implementations and applications. Based on the analysis of the state-of-the-art, novel application circuits employing the above circuit elements are designed. For the purpose of the experimental verification, the active elements are implemented via commercial integrated circuits, and their applications are simulated via PSpice. The application circuits are focused on frequency filters, rectifiers, oscillators, and current-copy circuits. Selected applications are analyzed with respect on real influences, and measurements on circuit prototypes are also performed.
|
|
|
Partial Discharge in High Frequency Electronic Equipment
Havlíček, Tomáš ; Maschke, Jan (referee) ; Dřímal,, Jiří (referee) ; Boušek, Jaroslav (advisor)
The presented thesis is focused on knowledge extension in the area of partial discharge measurements and evaluation at frequencies higher than 1 kHz. The thesis includes the design and set up of the measuring workplace equipped for measuring partial discharges, including the methodology of the measuring and calibration procedures necessary for the achievement of reproducible results. Another part of the thesis deals with the technology of acoustical and electromagnetic sensors convenient for the diagnostics and localization of partial discharges in devices, that work at voltages above 500 V. Electrical circuits that enable data evaluation by using the signal from a sensor working on amplitude analysis principle were developed. For PD detection a PC controlled measuring device working on amplitude analysis principle had to be designed and realized. The possibilities of the workplace have been demonstrated in the process of development of the insulating systems for pulse transformers. Thesis results can significantly contribute to a higher quality of newly designed electronic devices and systems working at voltages above 500 V.
|
|
|
Partial Discharge in Electronic Equipments
Mammadov, Anar ; Maschke, Jan (referee) ; Dřímal,, Jiří (referee) ; Boušek, Jaroslav (advisor)
Tato disertační práce se věnuje studiu částečných výbojů (PD) způsobených poklesem spolehlivosti a životnosti elektronických zařízení a systémů. Diagnostika PD je dnes známá metoda pro vysoké napětí u vysoko-výkonných zařízení. V případě elektronických zařízení PD testování není ale běžně používáná metoda, přestože je zde také potenciál pro vysoké elektrické zatížení vzhledem k velmi krátké vzdálenosti. Tato práce je zaměřena na vyšetřování PD činnosti u elektronických zařízení. Bylo navrženo a provedeno pracoviště pro diagnostiku PD v elektronických zařízeních. Pracovní frekvence se pohybuje od několika stovek Hz až 100 kHz. Maximální amplituda PD testovaného napětí je vyšší než 10 kV. Navzdory jednoduché konstrukci toto zařízení přináší vysokou spolehlivost měření. Více než 300 PD testů bylo provedeno na různých elektronických zařízeních a elektronických součástí,např. na planárních transformátorech a elektronických komponentách používaných při vysoko-napěťových měničích
|
guest ::
