|
|
Weather station with air quality measurement
Lacina, Jaroslav ; Hájek, Jaroslav (referee) ; Lattenberg, Ivo (advisor)
This bachelor thesis deals with the design and implementation of the wireless weather station with air quality measurement. At the beginning of the theoretical part, meteorology will be analysed. Afterwards, this work describes physical principles and the method of measurement of physical quantities that are measured by the meteostation. Next is the folloving technology described - Internet of things. The weather station is powered by a single battery and operates autonomously without any user intervention. It measures temperature, humidity, atmospheric pressure, CO2 and tVOC. Measured data are saved in to the cloud service ThingSpeak using a GSM signal. Further the work focuses on creation of web applications. The well organized graphs are created from the measured values.
|
|
|
Front-end frameworks for ASP.NET Core web applications
Kozhukhov, Konstantin ; Harár, Pavol (referee) ; Lattenberg, Ivo (advisor)
In this bachelor thesis I deal with design and implementation of a web application servingas information system for storage of electronic components. The first two chapters ofthis work deal with the theoretical analysis and description of technologies that will beused in the application, while the last chapter is dedicated to implementation. The goalof the resulting program is a simple demonstration of the use of the platform ASP.NETCore with a framework DotVVM.
|
|
|
Higher-order current mirror filters
Semmler, Petr ; Jeřábek, Jan (referee) ; Lattenberg, Ivo (advisor)
The bachelor's thesis deal with designing frequency filters fourth and sixth rule with current component CMI, GCMI and MCMI and with multi-output current mirrors. The introduction presents basic information about frequency filters divided base several views. Next information attention about current mirrors with divided base several views. Theory part is closed information about current component GCMI, CMI, MCMI. Second part my bachelor's thesis deal manual designing frequency filter with method of autonomous circuits. This method were designed several circuit for fourth and sixth rule. Then he was always one circuit selected for the final analysis, an analysis was performed using program PSpice and Snap. The last section is devoted to the replacement of components of current mirrors. It analyzed the functionality of current mirrors including verification of the functionality of filters incorporating current mirrors.
|
|
|
Low-energy Security Device with (Espressif) ESP8266/ESP32 Module
Ondráček, Petr ; Lattenberg, Ivo (referee) ; Škorpil, Vladislav (advisor)
Bachelor's thesis discusses the design and realization of low-energy security device using Wifi module ESP32. The device will detect the opening of door/window/space by using magnetic contact and this event will be reported on appropriate cloud service and by e-mail. The theoretical part is focused on the Internet of Things problematics, cloud services and description of individual components of the final device. Second part of thesis is focused on designing of the linkage scheme, control program and calculation of power consumption of the device. Third part is already focused on practical realization of the designed device, designing and creation of printed circuit board and security box, programming, creation of the cloud channel that will visualize collected data and measurement of power consumption of the final device.
|
|
|
Ultrasonic distance measurement
Klich, Michal ; Krajsa, Ondřej (referee) ; Lattenberg, Ivo (advisor)
The aim of this bachelor thesis is the design and manufacture of a controlling program of equipment for distance measurement using ultrasonic sensors. It focuses on a detailed description of the whole design from the basic properties of the components to the creation of schemes and PCB design. It subsequently describes in detail the development of controlling software of the equipment. The work briefly describes the most important parts of the code. It summarizes all theoretical and practical knowledge gained during the creation of the whole design, it explains the principles of the functions and works of individual parts and it suggests the best possible options of connection of the whole equipment. It also suggests the best possible variants of the entire circuit. The bachelor thesis also describes the microprocesor AVR ATmega8 from the Atmel Corporaton, which controls the entire device, as well as EEPROM memory chip 24LCXXX, SRF05 ultrasonic sensor and communication with the PC via USB using a microchip FT230XS-R.
|
|
|
USB battery tester
Andrysík, Lukáš ; Langhammer, Lukáš (referee) ; Lattenberg, Ivo (advisor)
This bachelor's thesis contains construction of battery tester along with primary and secondary cells comparsion. It consists of four parts - the first one focuses on general description of the most commonly used electrochemical cells, their characteristics, advantages and disadvantages. Second one relates to design a custom equipment for testing these cells including software, parts values calculations and common problems with the design. Third part is mainly about mechanical design and PCB manufacture. The last section is devoted to comparsion of several models of cells in terms of capacity and performance under different conditions.
|
|
| |
|
|
Usage of Model-View-Controller design pattern in web applications
Margai, Ladislav ; Bartl, Milan (referee) ; Lattenberg, Ivo (advisor)
Content of this thesis is focused on usage of design pattern Model-View-Controller in web applications. The thesis is divided into several chapters. In first chapter is explained how MVC model works and necessary edits for usage in web applications. In second chapter is described development from web forms to MVC and comparison of these two concepts. Third chapter is focused on work with Razor engine. Last three chapters describe development of the application.
|
|
|
Design and implementation of LAN home network using PLC technology
Pataj, Jiří ; Lattenberg, Ivo (referee) ; Mišurec, Jiří (advisor)
Master’s thesis deals with possibilities of data communication on low voltage power lines, so-called PLC. This technology allows data transfer on power lines. According frequency band the PLC can be subdivide into narrowband or broadband class. Given are theoretical knowledge’s of data communication on power lines and describes technical solutions. Consequently is suggestion of LAN, which is accessible for commercial usage made by DS2 and his suitable for home use. The main acquisition is implementing and measuring this experimentally created LAN in family house. The results are real bitrates depending on distance and quality of specific connection.
|
|
|
Electronic thermometer and humidity meter
Lapáček, Petr ; Chmelař, Milan (referee) ; Lattenberg, Ivo (advisor)
This master´s thesis deals with the design of measuring station used for the temperature and humidity measurement. There is a theoretical basical description of sensores for temperature and humidity measurement in the first part. Furthermore I deal with a theoretical design of measuring system, especially with types of materials and possibilities of communication between these parts. The main part of thesis is about communication on buses I2C,UART, SPI, RS485. There is a description of function procedure of particular integrated circuit, moduluses which are used in task in the next part of thesis.In the practical part I was engaged in a functional design of autonomous system for the temperature and ralative humidity measurement. Data could be presented by the computer after connection with the station. There is a description of testing the particular circuits and the full description of function particular blocks of system in the task. I have used the program called Eagle for schemes and printed wirings designing. The copy is placed on CD ready for next using. In the last part of thesis is a brief description of program algorithm "Meteostanice", which I have created for data presentation. There is an illustration of measuring results in these last part. The task is completely ready for the realization of autonomous system of weather station with its own memory.
|
guest ::
