|
|
Multifunctional building Litomyšl
Kovář, Lukáš ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
Diploma thesis deals with the design of the multifunctional building located between Havlickova and F. Vogner streets in relation to the existing building in Litomyšl. Building plot is slightly sloping, at the rear goes into greater inclination. The building has four aboveground floors and one underground floor. The building includes services, located in ground floor, administrative premises decomposing in the second and third floor and apartments on the top floor. In the basement are located parking spaces. Supporting skeleton of the building is a cast-in-place concrete frame. Roofs are designed as a flat single shell. In part of roof over third floor is a green roof. The building is founded on piles. Due to the occurrence of water pressure is building an extra solved waterproofing system with checks and activation. The work includes text messages, drawings for building construction, fire safety design, construction and physical assessment of building structures and specialization from concrete structures.
|
|
|
Locomotive engines ČKD
Kovář, Lukáš ; Janoušek, Michal (referee) ; Zubík, Martin (advisor)
The work contains summary of locomotive diesel engines ČKD and description of the basic specification of these engines and its comparison with modern engines from selected manufacturers. This work also focuses on specific conditions of engines used in rail vehicles.
|
|
|
Silicone torsional vibration damper for a six-cylinder diesel engine
Kovář, Lukáš ; Kučera, Pavel (referee) ; Píštěk, Václav (advisor)
The aim of this thesis is to design crankshaft for in-line six-cylinder diesel engine and to design viscous torsional vibration damper for the cranktrain of specified parameters. The thesis includes the creation of a dynamic torsional model of cranktrain and calculation of forced vibrations of mechanism with and without damper. Part of this thesis is also strength analysis of the designed crankshaft with damper using the Finite Element Method (FEM).
|
|
|
DAQ application development for measurement of electric energy consumption in machinery
Kovář, Lukáš ; Kovář, Jiří (referee) ; Andrš, Ondřej (advisor)
The goal of the diploma thesis is to develop application for data acquisition and analysis during the measurement of electrical consumption at mechanical machines. First part of the diploma thesis is providing general summary about the methods of measuring the electrical consumption. Special focus is given on methods of the metering electrical consumption in three-phase distribution network. Furthermore, the data acquisition components are being described. Hardware components and development environment LabVIEW where the program itself was created are detailly described.
|
|
|
Detached house with a patisserie
Kovář, Lukáš ; Rybaková, Anna (referee) ; Utíkalová, Ivana (advisor)
This bachelor thesis deals with the design of the house with a patisserie located in Litomyšl. It is a two storey detached building. The building has a rugged floor plan consists of three rectangles, which are irregularly superimposed over each other. The building is covered gable roof over the living area and two flat roofs over the operation of pastry shops and garages. On the first floor is composed of operation patisserie shop with seating (including a separate barrier-free WC for women and men), kitchen, warehouse and production facilities for employees (WC, shower and dressing room). In another wing of the building adjacent to the ice cream parlor are located residential portion of the house (kitchen, living room and office) with a technical background (utility room and WC) and a corridor from which enters via a staircase to the second storey. In this part of the building is a hall with study, living rooms (two children's rooms and bedroom), room of homework and bathroom. In the last wing is a double garage, which follows the house through a vestibule. The shop is part of the operation pergola covered terrace and parking areas. The work includes text messages, drawings for building construction, fire safety design, construction and physical assessment of building structures and seminar work of wooden facade cladding.
|
|
|
Project Management In Manufacturing Company
Kovář, Lukáš ; Šrom, Michal (referee) ; Juřica, Pavel (advisor)
The Bachelor’s thesis is focused on the project management in the manufacturing company. At first the theoretical basis, is established, principles, themes and processes of the PRINCE2 defined. In the analytical sector the company is introduced, and the course of contract, based on project management perspective, is analyzed. Also, based on comparison, the differences between the current state and the approach of PRINCE2 are registered. Finally, the results of the analysis are applied for suggestion of changes, whose should be applied, to make project managed by the PRINCE2 methodology.
|
|
|
Methods of infectious waste management from hospital operations
Kovář, Lukáš ; Máša, Vítězslav (referee) ; Konečná, Eva (advisor)
The aim of the bachelor thesis is to provide a comprehensive overview of health–care waste and the possibilities of disposal. It focuses on infectious waste generated by hospital business. There are a lot of special rules for infectious waste. It is very important to apply them in handling and subsequent disposal. Proper management of hazardous waste is very important for health security. The bachelor thesis will provide an overview of the methods for the disposal of hazardous wastes as well as their mutual comparison. One of the latest devices for the decontamination and destruction of medical material is the Converter.
|
|
|
DAQ application development for measurement of electric energy consumption in machinery
Kovář, Lukáš ; Kovář, Jiří (referee) ; Andrš, Ondřej (advisor)
The goal of the diploma thesis is to develop application for data acquisition and analysis during the measurement of electrical consumption at mechanical machines. First part of the diploma thesis is providing general summary about the methods of measuring the electrical consumption. Special focus is given on methods of the metering electrical consumption in three-phase distribution network. Furthermore, the data acquisition components are being described. Hardware components and development environment LabVIEW where the program itself was created are detailly described.
|
|
|
Methods of infectious waste management from hospital operations
Kovář, Lukáš ; Máša, Vítězslav (referee) ; Konečná, Eva (advisor)
The aim of the bachelor thesis is to provide a comprehensive overview of health–care waste and the possibilities of disposal. It focuses on infectious waste generated by hospital business. There are a lot of special rules for infectious waste. It is very important to apply them in handling and subsequent disposal. Proper management of hazardous waste is very important for health security. The bachelor thesis will provide an overview of the methods for the disposal of hazardous wastes as well as their mutual comparison. One of the latest devices for the decontamination and destruction of medical material is the Converter.
|
|
|
Silicone torsional vibration damper for a six-cylinder diesel engine
Kovář, Lukáš ; Kučera, Pavel (referee) ; Píštěk, Václav (advisor)
The aim of this thesis is to design crankshaft for in-line six-cylinder diesel engine and to design viscous torsional vibration damper for the cranktrain of specified parameters. The thesis includes the creation of a dynamic torsional model of cranktrain and calculation of forced vibrations of mechanism with and without damper. Part of this thesis is also strength analysis of the designed crankshaft with damper using the Finite Element Method (FEM).
|
guest ::
RSS feed.