|
|
Stereometric LED display
Kováč, Michal ; Macháň, Ladislav (referee) ; Bohrn, Marek (advisor)
The bachelor thesis deals with the design of stereometric display made of the mesh of RGB LED arranged to the matrix of 8x8x8. The thesis copes with the options of diodes’ arrangement according to minimization of number of leads as well as building process of desired mesh. The device is controlled by FPGA circuit on the development board Spartan-3 Starter Kit and control circuit is described in the thesis. The information about displayed text and animations are transmitted into the circuit from computer through USB interface. The display is created, apart from Spartan-3 Starter Kit, by two connected boards which design is also described in the thesis. The first one presents the stereometric display itself with essentials components and the second one provides communication with the computer.
|
|
|
SIMULATION AND IMPLEMENTATION ANALYSIS OF THE AUTOSYNCHRONOUS SUBSYSTEMS IN VLSI DEVICE
Kováč, Michal ; Kostka,, František (referee) ; Jalovecký, Rudolf (referee) ; Kolouch, Jaromír (advisor)
This thesis focuses on problem-solution analysis of synchronous digital circuits; the results of which are autosynchronous circuit design methodology, timing parameter definitions based on simulation models and constraint settings. The RTL transformation of the synchronous state machine in VHDL language to an autosynchronous state machine was created with minimal modifications for the simple design of these circuits. Following this, a comparison of the transformed state machines with their synchronous originals in parameters such as chip area, current consumption and timing specification domain is introduced. The summation of this thesis displays a theoretical comparison of several types of synchronization (synchronous, autosynchronous, fundamental asynchronous, EAIC, Bundled-data, Dual-rail) which are presented on the single state machine example with the same technology parameters.
|
|
|
Stepper motor control using CPLD
Daněk, Jan ; Kolouch, Jaromír (referee) ; Kováč, Michal (advisor)
The aim of my bachelor thesis was the control of CPLD stepper motor. To create a radio controlled antenna rotator. The controlling is done by a computer using RF circuits. The thesis includes a construction and principles of stepper motor. Basic structures of CPLD circuits were applying to create the control circuit. The possibilities of sensing the position and the data storage circuit were discussed. The control program in VHDL was implemented in development boards. The development board is connected to radio receiver circuit and the stepper motor driver. A transmitting board was connected to a personal computer or other device using RS232 interface. Printed circuit boards for transmitter and receiver circuits were created. The PC program was designed for data transmission. The program sends data and communicates via RS232 interface.
|
|
|
Geodetic Deformation Measurements of "Gagarin" Bridge.
Kováč, Michal ; Vitula, Alexej (referee) ; Bureš, Jiří (advisor)
The content of this master´s thesis is a geodetic measuring of movements and deformations of skeleton and underwork of „Gagarin“ railway bridge during the seventh period and processing of the data got. This was done by comparison of the movements according to the fifth and sixth period. The work includes also the calibration of appliance used. The results involve figures of the movements with their graphic interpretation and calibration sheets of the appliance.
|
|
|
Development of innovative composite systems ETICS on the basis of a new generation of secondary raw materials
Kováč, Michal ; Ševčík, Milan (referee) ; Drochytka, Rostislav (advisor)
This master’s thesis applies utilization of alternative raw materials in thermal insulation system of the ETICS of new generation for houses. The theoretical part dealt with the explanation of the ETICS and the selection of suitable raw material for his innovating. In the following practical part were used selected materials to create a new thermal insulation made of straw and binding materials of cement, casein glue, bicomponent fibers and mushroom mycelium. At the end have been applied the variants of base coat of clay and mineral screed on new thermal insulation, from which was selected the optimal variant. From optimal thermal insulation and suitable base coat was conducted proposal of final version of new ETICS.
|
|
|
Wireless safety appliance
Čapek, Lukáš ; Kováč, Michal (referee) ; Kolouch, Jaromír (advisor)
The purpose of this project is to secure an object, for example bicycle, buggy,merchandise. Protecting device consists of a sensor unit and a pager unit. Both of these units contain a transceiver which works in ISM band. Operation circuits drive microprocessor AVR with low power technology because of possible battery supply. Sensor unit is monitoring the state of sensors and battery discharging. This unit can use accelerometer sensor and two contact sensors. The pager unit indicates alarm, the state of battery in both units and signalizes loss of connection.
|
|
|
Algorithms for analysis and processing of RFID signals in FPGA
Harvánek, Michal ; Kováč, Michal (referee) ; Derbek, Vojtěch (advisor)
The result of this thesis is the architecture design for a software-defined radio, which is used to analyze the signal emitted by RFID tags in real time. The aim of this analysis is to measure the frequency characteristics of the RFID tag. The main means for achieving the objective of optimizing signal processing algorithms and reduce the time needed to control the hardware compared to the classical concept of SW radio USRP. It is described how to obtain and display digitally sampled signals using a graphical programming language LabVIEW and subsequent processing of these data in MATLAB. Further described is the skeleton of the proposed solution.
|
|
|
OFDM modulator in FPGA chip
Kováč, Michal ; Fujcik, Lukáš (referee) ; Bohrn, Marek (advisor)
The master’s thesis deals with the design of modulator OFDM in the FPGA circuit. The thesis describes basic attributes of modulation OFDM, its pros and cons. With the help of created block level scheme, it describes all the components of the processing of the data signal on its way from the transmitter to the receiver. The Atlys Spartan-6 Development Board has been chosen for the implementation of the modulator. The other part of thesis is the design and realization of the analog-digital interface for the modulator OFDM. The interface consists of PCB, which is connected to the development board using expansion connector. The board is assembled with all the parts required for transmitting the signal as well as consecutive receiving, the description of used solutions is also a part of this master’s thesis. Proper function of both designed parts was verified using hardware co-simulation.
|
|
|
Power audio amplifier with AC/DC converter
Melša, Vojtěch ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
The aim of this work was to design and construct a simple audio amplifier, which would be based of involvement and components used in switching power sources on the maximum degree (for example from usual ATX sources for computer). The main motivation for development is the existence of many old sources that do not use and big interest of users for the construction of home audio amplifiers for small and medium power. Amplifiers based on switching power sources with greater efficiency and less weight than comparable classic amplifiers (working in classes A, B or AB). Their disadvantage is the complicated design and introduction of distortion and spurious signals to the amplified signal. This work will be described a design of simple amplifier, which will minimize these negative effects. For shortcomings and wrong parameters this proposed involvement will be eventually described and implemented design of amplifier in class D.
|
|
|
Ultrasonic anemometer
Dvořáček, Michael ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
Work describe principles and problems of the realization ultrasonic anemometer. It's described methods of computation speed wind and its correction. In favor of realization are used ultrasonic transducers and microcontroller ARM Cortex-M3. The work treats PWM signal generating, its analog filtration, amplification and transmitting. On receiving part there are low voltage amplifier and comparator. Developing code is described by flowcharts.
|
guest ::
RSS feed.