|
|
Design of synchronous linear motor
Jindra, Michal ; Mach, Martin (referee) ; Knebl, Ladislav (advisor)
Proposed thesis is focused on synchronous linear motor with an iron core, the design of an equivalent magnetic circuit and its calculation. The work describes the principle of a synchronous linear motor with permanent magnets, U-channel linear motor and a tubular linear motor. For these types of linear motors, the design solution is described and general advantages and disadvantages are mentioned. The losses generated in the motors are also described. The work introduces various methods of engine calculations that can be used for subsequent application to a particular type of motor. Subsequently, one of the methods is selected and used to calculate the motor. The last part is the evaluation and comparison of results.
|
|
|
Design of high speed induction motor
Čech, Jiří ; Knebl, Ladislav (referee) ; Ondrůšek, Čestmír (advisor)
The first part of this paper presents general information about electromagnetic designing of an induction motor. Focus is on explanation of individual designing aspects and their effects on final motor parametres. Design principles for magnetic cores, slot dimensioning, stator winding and rotor squirrel cage are presented. Second chapter presents complete analytical computation of a given induction motor. Firstly several parametres need to be selected. Then sizing of stator and rotor is conducted. Secondly steady state equivalent parametres and related operating characteristics are computed. Following chapter consinsts of three final designs. In the last chapter results of mechanical analysis are presented.
|
|
|
Design of synchronous linear motor thermal network
Čech, Jan ; Toman, Marek (referee) ; Knebl, Ladislav (advisor)
The first part of this thesis deals with the study of linear motors. The introduction of the thesis deals with the brief description of the linear motor, including its accessories. This part explains principle of linear motors, their general advantages and disadvantages. The next section contains an overview and division of the currently used linear motors. The second part deals with the theoretical description of forms of heat transfer. The third part of the thesis deals with the design of an equivalent thermal circuit model of a linear iron-core linear motor with permanent magnet. Hereafter, the proposed design will be used to calculate the temperatures of the individual motor units. The temperatures are later compared with the results obtained with finite element method.
|
|
|
Rotor design of a Line-Start Synchronous Reluctance Machine for Industrial Applications
Žíla, Jakub ; Knebl, Ladislav (referee) ; Bárta, Jan (advisor)
This diploma thesis deals with design of rotor of synchronous reluctance machines. There is a theoretical description of rotor geometry of synchronous reluctance machine that respects natural flow of magnetic flux inside complete rotor. The parametric model of rotor is made with usage of ANSYS Maxwell and Matlab software. Furthermore, the parameters of the machines are confirmed using the same program. Finally, changes of motor parameters are observed in connection with different rotor geometries.
|
|
|
Optimization of a small induction machine.
Jedlička, Lukáš ; Knebl, Ladislav (referee) ; Mach, Martin (advisor)
The goal of this thesis is to improve efficiency of an induction motor. In the first part, the working principle is described. The next part deals with the origin of losses and possible solutions to decreasing losses without impacting the production possibles. The third part of the thesis is focused on the calculation of parameters of a small serial production motor. In the fourth part, these parameters are verified using the analytical tool RMxprt which is included in Ansys Maxwell. The fifth chapter deals with the optimization using Matlab genetic algorithm. In the final chapter, the design modifications are verified using the method of finite element Ansys Maxwell 2D.
|
|
|
Stator Windings Currents Analysis Of The Ipm
Machine Under Short-Circuit Conditions
Knebl, Ladislav
The development of the synchronous motors with permanent magnets is, mostly thanks to the legislation pressure to achieve the highest efficiency in electric drives, experiencing raising interest. Since the number of motors used in the industry is growing year by year, it is reasonable to investigate the motor behavior under faulty conditions, such as short-circuit conditions. This paper deals with the stator current analysis of interior permanent magnet synchronous motor under the short-circuit condition, both short-circuit in one phase and symmetrical three-phase short-circuit.
|
|
|
Design of synchronous spoke motor
Kopecký, Jan ; Bulín, Tomáš (referee) ; Knebl, Ladislav (advisor)
This thesis is focused mainly on the theoretical research of permanent magnet synchronous motors. In addition, various methods of designing the motor‘s magnetic circuit are discussed and their advantages and disadvantages are compared. The reluctance network method is analyzed more thorough, because this method is used for motor designing process. In the last part the results obtained by reluctance network are compared with the results evaluated by finite element method.
|
|
|
Design of linear motor with permanent magnets
Čech, Jan ; Bulín, Tomáš (referee) ; Knebl, Ladislav (advisor)
The first part of this thesis deals with the study of linear motors. The introduction of the thesis deals with the brief description of the linear motor, including its accessories. This part explains principle of linear motors, their general advantages and disadvantages. The next section contains an overview and division of the currently used linear motors. Each type of currently used linear motors is briefly introduced and also its principle and characteristics are described, including its specific application. The second part of the thesis deals with the design of an equivalent magnetic circuit model of a linear iron-core linear motor. Hereafter, the proposed design will be used to simulate the distribution of magnetic flux in the linear motor. The evaluated flux-density distribution in the air gap is later compared with the results obtained with finite element method. The thrust is then calculated from the flux-density and the estimated value is compared with the value listed in datasheet.
|
|
|
Design of synchronous reluctance motor with permanent magnets
Knebl, Ladislav ; Huzlík, Rostislav (referee) ; Ondrůšek, Čestmír (advisor)
V dnešní době je kladen vysoký nárok na účinnost elektrických zařízení a to jak ze strany provozovatele, tak i legislativy. Nejlepší účinnosti dosahují synchronní motory s permanentními magnety umístěnými na povrchu rotoru (SMPM), se kterými lze i u malých motorů dosáhnout účinnosti nad 90%. Nicméně tyto motory jsou z důvodů použití magnetů ze vzácných zemin, např. NdFeB, drahé a jsou schopny provozu pouze s frekvenčním měničem. Z cenových důvodů jsou hledány levnější alternativy k SMPM motorům. Jedním z typů motorů, kterým lze SMPM nahradit je synchronní reluktanční motor s permanentními magnety (PMASR). Tento motor je cenově výhodnější, protože používá menší množství magnetů, při zachování podobných, mnohdy i lepších vlastností, nicméně neodpadá potřeba použití frekvenčního měniče. Navíc je zde možnost použití levnějších feritových magnetů a tím ještě výrazněji snížit cenu motoru. V této práci bude PMASR topologie popsána důkladněji včetně elektromagnetického návrhu metodou konečných prvků. Bude provedena i mechanická analýza zvoleného optimálního modelu. Výsledky dosažené metodou konečných prvků budou následně porovnány s analytickým modelem. Z navrženého modelu bude vyroben prototyp a naměřené výsledky budou porovnány s výpočty.
|
|
|
Type test of a switching device
Knebl, Ladislav ; Dostál, Lukáš (referee) ; Valenta, Jiří (advisor)
Protection of the electrical ciruits in electrical installations by circuit breakers is the most common way of protecting circuits from overcurrents. In the low voltage installations, fuses were replaced by the circuit breakers. For this reason, it is important to put great emphases on their quality and user safety . This thesis deals with principle of the circuit breaker, its function, construction requirements and requirements for the type test, which the manufacturer needs to pass before release the device on market. These requrements are listed in Czech Technical Standard ČSN EN 60898-1. In this thesis, specific type of circuit breaker will be also described. Some sequences of tests described in the standard will be performed on that breaker.
|
guest ::
