|
|
Self-priming pump
Urban, Jiří ; Hudec, Martin (referee) ; Pochylý, František (advisor)
Diploma thesis is focused on self-priming pump 25 - OVE Sigma pumpy Hranice s.r.o., for its function is essential the ejector which is placed in the body of the pump. On the basis of the results of measurements there are designed construction modifications using a mathematical model. For the first time were made measurements to verify the self-priming capability with determining the maximum suction height.
|
|
|
Marketing Plan for Enterntainment Park
Hudec, Martin ; Lubasová,, Alena (referee) ; Novák, Petr (advisor)
The bachelor thesis is focused on the marketing plan for entertainment park Permonium®, which is opened for visitors since 2012. The thesis describing inovation tasks, which will be used for increase atractivity and attendance. Including thesis were made detailed project for three years, which has to achieve mentioned expansion in turistic-entertainming industry.
|
|
|
Study of hydroenergy potential exploitation of given location
Kollár, Martin ; Hudec, Martin (referee) ; Rudolf, Pavel (advisor)
For the objective of my Bachelor`s thesis I chose an assessment of hydropower potential and a design of machinery in the small hydropower plant construction on the river Váh in Trenčianske Biskupice site. I divided hydropower potential into three parts. First part is the past then present and last is future status. I have subsequently used these information in the design of machinery, including turbine and its associated penstock and draft tube. Part of my thesis also contains appropriate design solution for control gate of intake and outflow, trash rack and trash rack machine. I prepared and presented two possible alternatives together with the drawing documentation which are at the end of my paper compared and evaluated.
|
|
|
Adaptation of a small hydropower facility
Doseděl, Jakub ; Šedivý, Dominik (referee) ; Hudec, Martin (advisor)
This bachelor’s thesis is about small hydropower facility. First part describes elementary types of hydropower facilities and classification of waterpower engines. Second part deals with legislation connected with permission issued by public law enabling construction and operation of a small hydropower facility and with promoting renewable energy sources.
|
|
|
Adaptation of the Watermill
Pavlík, Jan ; Hudec, Martin (referee) ; Klas, Roman (advisor)
The bachelor´s thesis is composed of two parts. In the first part, there is a generally discourse about small water power plants, their structural design, mechanical equipment and economical efficiency and its function is to create the basic conception of the waterwork. The second one deals concretely with the small water power plant in Crhov, that was rebuilt from the original mill by Mr. Petr König in 1990s.
|
|
|
Cavitation erosion
Lecnar, Lukáš ; Hudec, Martin (referee) ; Rudolf, Pavel (advisor)
This bachelor’s thesis focuses on cavitation erosion and it is divided into two main parts. The first part is devoted to the search of cavitation erosion focusing on erosion mechanisms. In the first chapter of this search is briefly described cavitation process and different types of cavitation are listed here. Hydrodynamic cavitation which is the key type for this bachelor’s thesis is described in the following chapter. The final and the most extensive chapter is devoted to cavitation erosion of solids which is largely associated with the effects of the mechanical action of the fluid. The second part is devoted to the experimental study of cavitation erosion of samples. The goal was to document the experiment which was carried out in order to gain knowledge about the material removal by cavitation erosion.
|
|
|
Dynamic radial force on centrifugal pump impeller
Nováková, Naděžda ; Hudec, Martin (referee) ; Habán, Vladimír (advisor)
This thesis deals with the radial forces acting on the impeller of a centrifugal pump. It focuses on the centrifugal pump type BETA 26. It addresses forces acting on the pump shaft. These forces are converted into the impeller. The most extensive part of this thesis is devoted to the experimental measurement and evaluation. The results are summarized and processed graphically.
|
|
|
Experimental testing of hydrocyclone
Juráš, Filip ; Hudec, Martin (referee) ; Rudolf, Pavel (advisor)
This bachelor thesis is focused on experimental testing of hydrocyclone. The work is divided into two parts. The first part describes basic parts of hydrocyclone, dimensions, and operating parameters of the tested hydrocyclone and principles of its work. The second, practical part, describes the general preparation of the experiment, which started with searching for a suitable material and continued to the filter device used for particle separation.
|
|
|
Cavitation assessment from flow rate drop and high-frequency pressure pulsations.
Šebek, Miloš ; Hudec, Martin (referee) ; Habán, Vladimír (advisor)
Main issue of this master´s thesis deals with high-frequency pulsations caused by cavitating hydraulic components (in this case nozzle and throttle valve). In first measurement on the nozzle was not a high-frequency sensor set in the way, so the evaluation was incorrect. After re-setting of the way was the nozzle measured again and the pulsations were evaluated correct this time. During the last measurement was the sensor located behind the throttle valve, which was with gradual opening and cavitation treatment measured. Resulting dependencies worked out on time dependence. A special mathematical method, Fourier transformation, was used. It transformed pressure amplitudes into frequency dependence. Evaluation of dependecies is the basic step for frequency band assesment, in which the cavitation on particular components happens.
|
|
|
Cavitation in engineering praktice
Kianička, Martin ; Hudec, Martin (referee) ; Pochylý, František (advisor)
This diploma thesis contains three parts. The first part is a background research which deals with notions such as cavitation and cyanobacteria. It also contains current phase in the use of cavitation. The second part deals with design, composition and constructional solution of hydraulic circuit on the riverboat. The third part deals with experimental certification of the cavitation effect on the cyanobacteria in the water. Design of the riverboat with the hydraulic circuit including the circuit itself and the cavitation tube was created in SolidWorks program, calculations, it’s processing and graphs were created in Microsoft Excel.
|
guest ::
RSS feed.