|
|
Measurement of the reverberation time
Hořák, Pavel ; Ryndová, Anna (referee) ; Jedelský, Jan (advisor)
This bachelor thesis deals with issues concerning measuring of reverberation time in closed rooms. Two evaluation methods are described in this thesis; integrated impulse response method and interrupted noise method. Data were recorded with the aid of acoustic module Photon+ and RT Pro 7.1. software. Practical part comprises implementation of evaluation programme in Matlab environment. Computation of reverberation curves is a major output of the thesis. Individual methods are compared on the basis of discovered figures.
|
|
|
Reporting of the Selected Company
Drábková, Adéla ; Horák, Pavel (referee) ; Hanušová, Helena (advisor)
The thesis deals with reporting. The first part is theoretically explained the concept of reporting, as one of the basic functions of controlling, PEST analysis, Porter's five forces model, 7S analysis and SWOT analysis. The practical part is focused on the analysis of the situation in reporting and follow-up proposals to improve the situation.
|
|
|
Credit Limit Management and Credit Application
Horák, Pavel ; Hebelka, Ivo (referee) ; Zeman, Václav (advisor)
The thesis deals with the bank credit risk over enterpreneurial subject with double-entry accounting system. The monitoring of possibilities to acquire the bank credit for future business development is based on operating results. The requisition for the bank credit is being prepared also with for the component for the bank providing the credit.
|
|
|
Measurement of the reverberation time
Hořák, Pavel ; Ryndová, Anna (referee) ; Jedelský, Jan (advisor)
This bachelor thesis deals with issues concerning measuring of reverberation time in closed rooms. Two evaluation methods are described in this thesis; integrated impulse response method and interrupted noise method. Data were recorded with the aid of acoustic module Photon+ and RT Pro 7.1. software. Practical part comprises implementation of evaluation programme in Matlab environment. Computation of reverberation curves is a major output of the thesis. Individual methods are compared on the basis of discovered figures.
|
|
|
IMPEDANCE MEASUREMENT OF GAS SENSORS WITH NICKEL(II)-AND COPPER(II)-OXIDE ACTIVE LAYERS
Horák, Pavel ; Khun, J. ; Vrňata, M. ; Bejšovec, Václav ; Lavrentiev, Vasyl ; Vacík, Jiří
Thin layers (90 nm) of nickel(II)- and copper(II)- oxide were deposited onto ceramic sensor substrates equipped with interdigital electrodes for signal reading. The deposition was carried out in two or three steps: (i) sputtering by means of Ar ion beam from pure (99.99%) metal targets, (ii) following thermal oxidation (400 degrees C for 5 h) in air, (iii) in some cases - sputtering of Pd catalyst to the surface. Then the impedance response of produced sensors (NiO, NiO+Pd, CuO, CuO+Pd) to 1000 ppm of hydrogen and 1000 ppm of methanol vapor was measured. Impedance measurements were performed in the frequency range from 40 Hz to 100 MHz. The obtained data were depicted in Nyquist representation (i.e. imaginary vs. real part of complex impedance). These diagrams have a character of one complete and one incomplete semicircle, each of them corresponding to a parallel RC-element. It was proved, that both NiO and CuO behave like p-type semiconductors; the sensor impedance increases on exposure to reducing gases. The best sensitivity was achieved on NiO+Pd sensor - during detection of hydrogen (1000 ppm) the real part of complex impedance measured at 40 Hz increased from 120 to 350 Omega.
|
|
|
Characterization of the Nanostructured Nickel Oxide Layers Prepared by Ion Beam Sputtering
Horák, Pavel ; Bejšovec, Václav ; Lavrentiev, Vasyl ; Khun, J. ; Vrňata, M.
Nanostructured nickel oxide layers (thickness cca 100 nm) were prepared by bombardment of nickel foil with ion beam created from a mixture of argon and oxygen. Different volume ratios of argon:oxygen mixture were used, ranging from 4:1 to 1:3. Composition of the resulting layers was analyzed by RBS, morphology by AFM and main crystal orientation of the sample by XRD. The electrophysical properties (resistivity, concentration of charge carriers) were measured by four point Van der Pauw technique and Hall measurement respectively. Prepared samples were characterized in as-deposited state and after annealing with varying temperature of treatment. Chemical composition (i.e. stoichiometry) of the as-deposited samples with different argon: oxygen ratio was related to their electrophysical parameters. Hall measurements are showing majority charge carriers to be electrons - surface concentration (0.5 - 2.3) x 10(21) m(-2) - suggesting prevailing metallic conductivity. Resistivity of the sample is increasing with higher amount of oxygen in gas mixture. The as-deposited layer is almost amorphous with no visible grains on AFM.
|
|
|
Polymers based on chemically modified starch
Horák, Pavel ; Kruliš, Zdeněk ; Šárka, E. ; Kobera, Libor
In our research, we are developing materials based on chemical modified wheat starch ant its derivatives. The starch is esterified with various acids or acid anhydrides, e.g. acetic or propionic acid. Main goal of this work is to determine the degree of substitution, which has significant relevance in study of modified saccharides. it was done using three different techniques - acid-base titration, elemental analysis and nuclear magnetic resonance spectroscopy.
|
|
| |
|
|
Inventory management in the dairy industry
HORÁK, Pavel
Analysis of the situation and the movements of stocks in selected dairy product line and s proposal for measures to reduce the capital intensity in stocks and an increase the quality of supply of services. Analysis of manufactured products by ABC method.
|
|
|
Roles of women and men in Czech and Italian advertisement
Aunická, Markéta ; Koudelka, Jan (advisor) ; Horák, Pavel (referee)
This study provides basic comparison of different tasks given to men and women in advertisements published in Czech and Italian periodicals. The different roles dedicated to male and female models, different style of presentation related to promoted products and different way of utilization of sexual phenomena are analyzed. First - theoretical part of this study contains main definitions and terms allowing the right understanding of common terms, specific for this research. Description of research procedures and statistical evaluation of obtained results is described in the second part of this study. The method of quantitative content analyses was mainly used to evaluate specific utilization of men and woman in advert industry of both countries. Obtained results provide updated survey of gender stereotypes used currently in Czech and Italian advertisements.
|
guest ::
RSS feed.