|
|
Processes of contact damage bearing materials
Chaloupka, Petr ; Dvořáček, Jiří (referee) ; Hort, Filip (advisor)
The focus of this bachelor’s thesis is treatise on processes of contact failures of bearings and theirs materials analyse type of degradation processes of material, contact fatigue strength and means of metering. In fine of bachelor’s thesis are given development of future tendencies in optimalization of bearings.
|
|
|
Design of multi-functional machining centre
Chaloupka, Petr ; Holub, Michal (referee) ; Blecha, Petr (advisor)
The first part of the thesis deals with risk management, legislation and safety, the machine must meet in order to be placed on the market. This part contains an analysis of the guards, because the guards an integral part of safe machine. The second part of the thesis assesses the safety of multifunction machining center CNC EcoSmart 1-line. Based on the identified risks have been designed and built the inner and outer guards.
|
|
|
The bridge among buildings
Chaloupka, Petr ; Ing.Karel Sýkora (referee) ; Puchner, Josef (advisor)
This master's thesis deals with the designing of the appropriate supporting steel structure footbridge for pedestrians. The footbridge is used to connect two separate buildings (buildings D and Z at the Faculty of Civil Engineering Brno University of Technology). Four variants have been designed about solutions supporting steel structure. The final variant was prepared in detail and was carried out static assessment of the individual elements and selected details. The main supporting structure of this variant are two trusses. Diagonals of these trusses are designed linkage system of Macalloy 460. Bridge deck is designed of composite steel a concrete board with crossbars. The footbridge is designed as simple beam with an overhanging end. Length span is 34.8 m, length overhanging ends is 5.8 meters. The total length of the footbridge is 40.6 meters. Width of footbridge is 2.8 meters. Free width is 2 meters. In the cross point with the axis of local road is height of footbridge above ground 4.43 meters. Next to the building Z, there is a footbridge stored on a concrete support, near the building D, the footbridge is stored on a steel frame of support. The footbridge is deposited on elastomeric bearings. The footbridge is being protected from the weather. The sheating of the building is designed by Wictec 60 system. The master's thesis also contains drawing documentation of the proposed solution.
|
|
|
Femtoscopy with multi-strange baryons at RHIC
Chaloupka, Petr ; Šumbera, Michal (advisor) ; Závada, Petr (referee) ; Staroba, Pavel (referee)
Au-Au collisions at RHIC energies exhibit features suggesting that the system has undergone evolution through a stage of partonic matter. The hot and dense system created in the collision builds up substantial collectivity leading to rapid transverse expansion. In particular recent measurements show that Ξ and Ω baryons develop substantial elliptic flow. Properties of the induced flow strongly depend on whether the collectivity is achieved on partonic or hadronic level. Multi-strange baryons may be, due to their presumably small hadronic cross- sections, mainly sensitive to the early (possibly partonic) stage. The main objective of this thesis is to study femtoscopic π−Ξ correlations in Au+Au collisions at √ sNN =200 GeV and √ sNN =62 GeV recorded by the STAR experiment at RHIC. Measurements of momentum correlations of particles at small relative velocities are used to extract information about space-time extension of the particle-emitting source at the time of kinetic freeze-out. Non-identical particle measurements are sensitive not only to the size of the system, but also to an emission asymmetry between different particle species. Since this asymmetry may arise from the collective expansion and/or early decoupling of Ξ these measurements of π−Ξ correlations provide important test of the dynamics of...
|
|
|
Multibosonové jevy na RHIC
Chaloupka, Petr
Au-Au collisions at RHIC energies exhibit features suggesting that the system has undergone evolution through a stage of partonic matter. The hot and dense system created in the collision builds up substantial collectivity leading to rapid transverse expansion. In particular recent measurements show that Ξ and Ω baryons develop substantial elliptic flow. Properties of the induced flow strongly depend on whether the collectivity is achieved on partonic or hadronic level. Multi-strange baryons may be, due to their presumably small hadronic cross- sections, mainly sensitive to the early (possibly partonic) stage. The main objective of this thesis is to study femtoscopic π−Ξ correlations in Au+Au collisions at √ sNN =200 GeV and √ sNN =62 GeV recorded by the STAR experiment at RHIC. Measurements of momentum correlations of particles at small relative velocities are used to extract information about space-time extension of the particle-emitting source at the time of kinetic freeze-out. Non-identical particle measurements are sensitive not only to the size of the system, but also to an emission asymmetry between different particle species. Since this asymmetry may arise from the collective expansion and/or early decoupling of Ξ these measurements of π−Ξ correlations provide important test of the dynamics of...
|
|
|
Multibosonové jevy na RHIC
Chaloupka, Petr
Au-Au collisions at RHIC energies exhibit features suggesting that the system has undergone evolution through a stage of partonic matter. The hot and dense system created in the collision builds up substantial collectivity leading to rapid transverse expansion. In particular recent measurements show that Ξ and Ω baryons develop substantial elliptic flow. Properties of the induced flow strongly depend on whether the collectivity is achieved on partonic or hadronic level. Multi-strange baryons may be, due to their presumably small hadronic cross- sections, mainly sensitive to the early (possibly partonic) stage. The main objective of this thesis is to study femtoscopic π−Ξ correlations in Au+Au collisions at √ sNN =200 GeV and √ sNN =62 GeV recorded by the STAR experiment at RHIC. Measurements of momentum correlations of particles at small relative velocities are used to extract information about space-time extension of the particle-emitting source at the time of kinetic freeze-out. Non-identical particle measurements are sensitive not only to the size of the system, but also to an emission asymmetry between different particle species. Since this asymmetry may arise from the collective expansion and/or early decoupling of Ξ these measurements of π−Ξ correlations provide important test of the dynamics of...
|
|
|
Femtoscopy with multi-strange baryons at RHIC
Chaloupka, Petr ; Šumbera, Michal (advisor) ; Závada, Petr (referee) ; Staroba, Pavel (referee)
Au-Au collisions at RHIC energies exhibit features suggesting that the system has undergone evolution through a stage of partonic matter. The hot and dense system created in the collision builds up substantial collectivity leading to rapid transverse expansion. In particular recent measurements show that Ξ and Ω baryons develop substantial elliptic flow. Properties of the induced flow strongly depend on whether the collectivity is achieved on partonic or hadronic level. Multi-strange baryons may be, due to their presumably small hadronic cross- sections, mainly sensitive to the early (possibly partonic) stage. The main objective of this thesis is to study femtoscopic π−Ξ correlations in Au+Au collisions at √ sNN =200 GeV and √ sNN =62 GeV recorded by the STAR experiment at RHIC. Measurements of momentum correlations of particles at small relative velocities are used to extract information about space-time extension of the particle-emitting source at the time of kinetic freeze-out. Non-identical particle measurements are sensitive not only to the size of the system, but also to an emission asymmetry between different particle species. Since this asymmetry may arise from the collective expansion and/or early decoupling of Ξ these measurements of π−Ξ correlations provide important test of the dynamics of...
|
|
|
Design of multi-functional machining centre
Chaloupka, Petr ; Holub, Michal (referee) ; Blecha, Petr (advisor)
The first part of the thesis deals with risk management, legislation and safety, the machine must meet in order to be placed on the market. This part contains an analysis of the guards, because the guards an integral part of safe machine. The second part of the thesis assesses the safety of multifunction machining center CNC EcoSmart 1-line. Based on the identified risks have been designed and built the inner and outer guards.
|
|
|
The bridge among buildings
Chaloupka, Petr ; Ing.Karel Sýkora (referee) ; Puchner, Josef (advisor)
This master's thesis deals with the designing of the appropriate supporting steel structure footbridge for pedestrians. The footbridge is used to connect two separate buildings (buildings D and Z at the Faculty of Civil Engineering Brno University of Technology). Four variants have been designed about solutions supporting steel structure. The final variant was prepared in detail and was carried out static assessment of the individual elements and selected details. The main supporting structure of this variant are two trusses. Diagonals of these trusses are designed linkage system of Macalloy 460. Bridge deck is designed of composite steel a concrete board with crossbars. The footbridge is designed as simple beam with an overhanging end. Length span is 34.8 m, length overhanging ends is 5.8 meters. The total length of the footbridge is 40.6 meters. Width of footbridge is 2.8 meters. Free width is 2 meters. In the cross point with the axis of local road is height of footbridge above ground 4.43 meters. Next to the building Z, there is a footbridge stored on a concrete support, near the building D, the footbridge is stored on a steel frame of support. The footbridge is deposited on elastomeric bearings. The footbridge is being protected from the weather. The sheating of the building is designed by Wictec 60 system. The master's thesis also contains drawing documentation of the proposed solution.
|
|
|
Processes of contact damage bearing materials
Chaloupka, Petr ; Dvořáček, Jiří (referee) ; Hort, Filip (advisor)
The focus of this bachelor’s thesis is treatise on processes of contact failures of bearings and theirs materials analyse type of degradation processes of material, contact fatigue strength and means of metering. In fine of bachelor’s thesis are given development of future tendencies in optimalization of bearings.
|
guest ::
RSS feed.